Linksys E1000 v2.0
bgn (N300) | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wireless-N Router | |||||||||||||||||
Support | |||||||||||||||||
Wikipedia | |||||||||||||||||
InfoDepot Wiki | |||||||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||||||
3rd Party Firmware | |||||||||||||||||
dd-wrt | |||||||||||||||||
OpenWrt |
Incompatible | ||||||||||||||||
Tomato any flavor | |||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||
Platform | |||||||||||||||||
Brand • Model • Rev |
Linksys E1000 v2.0 | ||||||||||||||||
Serial number prefix |
CVN1 | ||||||||||||||||
FCC ID | |||||||||||||||||
IC ID | |||||||||||||||||
Board ID |
3763-11200502R | ||||||||||||||||
Type |
wireless router | ||||||||||||||||
Series |
E1000 | ||||||||||||||||
CPU1 |
Broadcom BCM5357B0 | ||||||||||||||||
CPU1 Type |
MIPS 74K | ||||||||||||||||
CPU1 Speed |
300 MHz | ||||||||||||||||
Flash1 Chip |
Macronix MX25L3206E | ||||||||||||||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Serial) | ||||||||||||||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||||||
RAM1 Chip |
Winbond W9425G6JH-5 | ||||||||||||||||
nvram Size |
32K | ||||||||||||||||
ETH chip1 |
Broadcom BCM5357B0 | ||||||||||||||||
Switch |
Broadcom BCM5357B0 | ||||||||||||||||
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||||||
Wired Standard |
IEEE 802.3/3u | ||||||||||||||||
Stock bootloader |
CFE | ||||||||||||||||
Expansion IF types |
none specified | ||||||||||||||||
Power |
12 VDC, 0.5 A | ||||||||||||||||
Connector type |
barrel | ||||||||||||||||
Serial Port (UART) |
yes | ||||||||||||||||
JTAG Port |
yes | ||||||||||||||||
Other | |||||||||||||||||
Default IP address: 192.168.1.1 | |||||||||||||||||
Manuf/OEM/ODM | |||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||
Retail | |||||||||||||||||
FCC approval date | 18 May 2010 | ||||||||||||||||
Country of manuf | China | ||||||||||||||||
Physical | |||||||||||||||||
Dimensions |
7.95" x 1.34" x 6.3" (202 x 34 x 160 mm) | ||||||||||||||||
Radio 1 | |||||||||||||||||
Chip1 |
Broadcom BCM5357B0 | ||||||||||||||||
Wireless interface OUI |
98:FC:11 | ||||||||||||||||
Antenna Connector Type |
none specified | ||||||||||||||||
MIMO status |
2x2:2 | ||||||||||||||||
Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||
802.11n |
up to 300 Mbps | ||||||||||||||||
802.11g |
up to 54 Mbps | ||||||||||||||||
802.11b |
up to 11 Mbps | ||||||||||||||||
WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||
Radio cor_rev |
28 | ||||||||||||||||
| |||||||||||||||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Linksys device with specifications, see Linksys.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
E1000 v2 serial numbers appear to start with CVN1.
"3763-11200502R" is silkscreened on the board in the FCC photos. The hardware appears to be the same as the Cisco Valet M10 v2.
The default SSID is probably CiscoXXXXX where XXXXX is the last 5 digits of the serial number. If the device has been configured with Cisco Connect the device will probably have a randomly generated SSID.
Supported by K26RT-N builds of Tomato by Shibby.
Links of Interest
Listed on the 'Linksys routers' page on Wikipedia
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
WARNING: Requires K2.4 for DD-WRT, Do not flash anything else! |
Supported by dd-wrt as of = 16758
Please enter flashing instrustions here
Flashing Tomato
Please enter flashing instrustions here
Pictures
- Linksys
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5357B0
- Broadcom
- Embedded System MIPS 74K
- Embedded System
- Manuf CyberTAN
- DD-WRT Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- FCC Photo's Needed
- English Documentation