We'll be deploying 1.43 to ShoutWiki sites this weekend. Staff will be working all weekend to deal with any unforeseen bugs that crop up.
CreateWiki will not be available immediately after the upgrade; however, we expect the rewrite to be completed during this release cycle.
3Com 3CRWE454G75
| bg (G54) | |
|---|---|
| '3Com OfficeConnect Wireless 54Mbps11g Access Point ('WL-524) | |
| Wikipedia | 3Com |
| WikiDevi.wi-cat.ru | 3Com 3CRWE454G75 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | 3Com 3CRWE454G75 |
| FCC ID (fcc.io) | O9C-WL524 |
| FCC ID (fcc.report) | O9C-WL524 |
| IC ID | 2299L-WL524 |
| Type | access point |
| CPU1 | Atheros AR2316A |
| CPU1 Type | MIPS 4KEc |
| CPU1 Speed | 180 MHz |
| Flash1 Chip | STMicro 25P16V6P |
| Flash1 Size | 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| RAM1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Chip | ISSI IS42S16400B-7TL |
| ETH chip1 | Atheros AR2316A |
| ETH chip2 | IC+ IP101 |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
| Stock FW OS | VxWorks |
| Expansion IF types | none |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
| Serial Port (UART) | yes, 9-pin header, internal, 3.3V TTL, unpopulated, Gemtek type1 pinout, (9600 8N1), JP1 |
|
| |
|
| |
| Other | |
|
Default SSID: 3Com (11 addl. devices) | |
| Manuf/OEM/ODM | Gemtek WAPA-139G |
| Retail | |
| FCC approval date | 31 March 2006 |
| Country of manuf | China, Taiwan |
| Radio 1 | |
| Chip1 | Atheros AR2316A |
| Wireless interface OUI | 00:1A:C1, 00:1E:C1 |
| Antenna Connector Type | U.FL, RP-SMA |
| Wireless Standard | IEEE 802.11b/g |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented 3Com devices with specifications, see 3Com.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
"WAPA-139G"(...) and "190-C03-06"(...) is silkscreened on a production model board.
- The Wi-Fi radio is using a Microchip (SST) SST12LP14 power amplifier and an NEC UPG2035 / UPG2035T5F (??) DPDT switch.
The power adapter included with the device appears to be a 3Com branded 3C12VUS.. which is a DVE DSA-15P-12 US 120120 (100-240VAC ~ 50/60 Hz, 0.5A -> 12VDC, 1A).
JTAG-Serial Info
Serial
Info derived from
| boot log |
|---|
ar531xPlus rev 0x00000087 firmware startup... Atheros AR5001AP default version 4.0.0.167 0 auto-booting... Attaching to TFFS... done. Loading /fl/APIMG1...1212368 Starting at 0x804846e0... /fl/ - Volume is OK Reading Configuration File "/fl/apcfg". wl1_root_ap_mac=00:00:00:00:00:00 wl1_root_ap_mac=00:00:00:00:00:00 Configuration file checksum: 5f382 is good wl1_root_ap_mac=00:00:00:00:00:00 Attaching interface lo0...done vp0 macaddr = 00:1a:c1:36:bf:03 ae0 macaddr = 00:1a:c1:36:bf:02 ser=9TDR8QK36BF02 start easyconf 08022006 wireless access point starting... channel 2462 wlan0 Ready Ready RegDmn = 16 wl_param_t_SW.wan_ip is 10.203.102.132 easyconf: a channel is easyconf: g channel is 11 easyconf: a channel is 0 easyconf: g channel is 11 easyconf: G no security easyconf: Fail to SetSockopt IP_MULTICAST_LOOP easyconf: Fail to SetSockopt IP_MULTICAST_TTL easyconf: enter while(1)dhcpcBind |
get hardware
AP11G wlan[0,0] -> get hardware wlan0 revisions: mac 11.0 phy 4.8 analog 7.0 PCI Vendor ID: 0x168c, Device ID: 0x13 Sub Vendor ID: 0x168c, Sub Device ID: 0x13 chip is AR5315
version
AP11G wlan[0,0] -> version AP software 4.1.4.19 MeiMei@BEST:E:/4.1.4.19/THGstubs/src/ap/os/vxworks/target/proj/ap-ar5315-production Dec 29 2006, 11:56:16
other
| Atheros AP shell help |
|---|
AP11G wlan[0,0] -> ? List of Access Point CLI commands: add remoteWbr -- Add a remote Wireless Bridge config wlan -- config wlanX config virtualap -- config virtual ap config bss -- config bss connect bss -- connect to bssX del acl -- Delete Access Control List del key -- Delete Encryption key del remoteWbr -- Delete a remote Wireless Bridge find bss -- Find BSS find bssPassive -- Find BSS with passive scans find channel -- Find Available Channel find all -- Find All BSS ftp -- Software update via FTP get 11gonly -- Display 11g Only Allowed get 11goptimize -- Display 11g Optimization Level get 11goverlapbss -- Display Overlapping BSS Protection get acl -- Display Access Control List get aging -- Display Aging Interval get antenna -- Display Antenna Diversity get association -- Display Association Table get authentication -- Display Authentication Type get autochannelselect -- Display Auto Channel Select get beaconinterval -- Display Beacon Interval get burstSeqThreshold -- Display Max Number of frames in a Burst get burstTime -- Display Burst Time get channel -- Display Radio Channel get cipher -- Display Encryption cipher get config -- Display Current AP Configuration get countrycode -- Display Country Code get ctsmode -- Display CTS mode get ctsrate -- Display CTS rate get ctstype -- Display CTS type get domainsuffix -- Display Domain Name Server suffix get dtim -- Display Data Beacon Rate (DTIM) get encryption -- Display Encryption Mode get extendedchanmode -- Display Extended Channel Mode get fragmentthreshold -- Display Fragment Threshold get frequency -- Display Radio Frequency (MHz) get gateway -- Display Gateway IP Address get groupkeyupdate -- Display Group Key Update Interval (in Seconds) get hardware -- Display Hardware Revisions get hostipaddr -- Display Host IP Address get interVF -- Display Inter Vap Forwarding State get intraVF -- Display Intra Vap Forwarding State get ipaddr -- Display IP Address get ipmask -- Display IP Subnet Mask get jsw -- Display Jumpstart Mode get jsP2PassPhrase -- Display JS-P2 passphrase get key -- Display Encryption Key get keyentrymethod -- Display Encyrption Key Entry Method get keysource -- Display Source Of Encryption Keys get login -- Display Login User Name get minimumrate -- Display Minimum Rate get nameaddr -- Display IP address of name server get operationMode -- Display Operation Mode get pktLogEnable -- Display Packet Logging Mode get power -- Display Transmit Power Setting get pvid -- Display the VLAN Tag get radiusname -- Display RADIUS server name or IP address get radiusport -- Display RADIUS port number get rate -- Display Data Rate get reg -- Display the register contents at the given offset get remoteAp -- Display Remote Ap's Mac Address get remoteWbr -- Display configured Remote Wireless bridges get rogueAPDetect -- Display Rogue AP Detection Mode get rtsthreshold -- Display RTS/CTS Threshold get shortpreamble -- Display Short Preamble Usage get shortslottime -- Display Short Slot Time Usage get sntpserver -- Display SNTP/NTP Server IP Address get ssid -- Display Service Set ID get ssidsuppress -- Display SSID Suppress Mode get active -- Display Active (up) Mode get station -- Display Station Status get SuperG -- Display SuperG Feature Status get systemname -- Display Access Point System Name get telnet -- Display Telnet Mode get timeout -- Display Telnet Timeout get tzone -- Display Time Zone Setting get upsd -- Display UPSD Mode get uptime -- Display UpTime get vaps -- Display Number of Virtual APs get vlan -- Display VLAN Operational State get wirelessmode -- Display Wireless LAN Mode get wmm -- Display WMM Mode get wmmParamBss -- Display WMM parameters used by STA in this BSS get wmmParam -- Display WMM parameters used by this AP get usrp -- Display the User Priority get wlanstate -- Display wlan state help -- Display CLI Command List ping -- Ping pktLog -- Packet Log reboot -- Reboot Access Point run -- Run command file quit -- Logoff set 11gonly -- Set 11g Only Allowed set 11goptimize -- Set 11g Optimization Level set 11goverlapbss -- Set Overlapping BSS Protection set acl -- Set Access Control List set aging -- Set Aging Interval set antenna -- Set Antenna set authentication -- Set Authentication Type set autochannelselect -- Set Auto Channel Selection set beaconinterval -- Modify Beacon Interval set burstSeqThreshold -- Set Max Number of frames in a Burst set burstTime -- Set Burst Time set channel -- Set Radio Channel set cipher -- Set Cipher set countrycode -- Set Country Code set ctsmode -- Set CTS Mode set ctsrate -- Set CTS Rate set ctstype -- Set CTS Type set domainsuffix -- Set Domain Name Server Suffix set dtim -- Set Data Beacon Rate (DTIM) set encryption -- Set Encryption Mode set extendedchanmode -- Set Extended Channel Mode set factorydefault -- Restore to Default Factory Settings set fragmentthreshold -- Set Fragment Threshold set frequency -- Set Radio Frequency (MHz) set gateway -- Set Gateway IP Address set groupkeyupdate -- Set Group Key Update Interval (in Seconds) set hostipaddr -- Set Host IP address set interVF -- Set Inter Vap Forwarding State set intraVF -- Set Intra Vap Forwarding State set ipaddr -- Set IP Address set ipmask -- Set IP Subnet Mask set jsw -- Set Jumpstart Mode set jsp2Passwd -- Set JS-P2 password set key -- Set Encryption Key set keyentrymethod -- Select Encryption Key Entry Method set keysource -- Select Source Of Encryption Keys set login -- Modify Login User Name set minimumrate -- Set Minimum Rate set nameaddress -- Set Name Server IP address set operationMode -- Set operation Mode set password -- Modify Password set passphrase -- Modify Passphrase set pktLogEnable -- Enable Packet Logging set power -- Set Transmit Power set pvid -- Set the VLAN Tag set radiusname -- Set RADIUS name or IP address set radiusport -- Set RADIUS port number set radiussecret -- Set RADIUS shared secret set rate -- Set Data Rate set reg -- Set Register Value set rogueAPDetect -- Set Rogue AP Detection Mode set rtsthreshold -- Set RTS/CTS Threshold set shortpreamble -- Set Short Preamble set shortslottime -- Set Short Slot Time set sntpserver -- Set SNTP/NTP Server IP Address set ssid -- Set Service Set ID set ssidsuppress -- Set SSID Suppress Mode set active -- Set Active (up) Mode set SuperG -- Super G Features set systemname -- Set Access Point System Name set telnet -- Set Telnet Mode set timeout -- Set Telnet Timeout set tzone -- Set Time Zone Setting set vaps -- Set Number of Virtual APs set upsd -- Set UPSD Mode set vlan -- Set VLAN Operational State set wlanstate -- Set wlan state set wirelessmode -- Set Wireless LAN Mode set usrp -- Set the User Priority set wmm -- Set WMM Mode set wmmParamBss -- Set WMM parameters used by STAs in this BSS set wmmParam -- Set WMM parameters used by this AP timeofday -- Display Current Time of Day version -- Software version nvram -- nvram utility |
- 3Com
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR2316A
- Atheros
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System IP101
- Embedded System IC+
- IC+
- Manuf Gemtek
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation