4ipnet HSG200

bgn (N300)
Wireless Hotspot Gateway
WikiDevi.wi-cat.ru	4ipnet HSG200
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	4ipnet HSG200
FCC ID	SCD020067
Type	access point
CPU1	Atheros AR7240
CPU1 Type	MIPS 24Kc
CPU1 Speed	400 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	SK hynix HY5DU121622DTP-D43
ETH chip1	Atheros AR7240
Switch	Atheros AR7240
Ethernet Port Count	1-100MbE-WAN 2-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1.5 A
Connector type	barrel
Serial Port (UART)	DE-9
Other
Default SSID: HSG200-1 , HSG200-2 Default IP address: 192.168.1.254 the IP 192.168.1.254 is used by 157 additional devices of which 0 are 4ipnet devices Default login user: admin Default login password: admin admin:admin credentials used by 1340 additional devices of which 3 are 4ipnet devices
Manuf/OEM/ODM	LanReady
Retail
FCC approval date	23 September 2010
Country of manuf	Taiwan
Radio 1
Chip1	Atheros AR9283
Wireless interface OUI	none specified
Antenna Connector Type	U.FL, RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"FN3A" and "REV:1.2" is silkscreened on the board in the FCC photos.

This is a LanReady OEM product.

The FCC test report lists additional models identified by this FCC ID. They are as follows..

• 3 Port
  • Cenwell CHG-920X
  • LanReady AC920X
  • Wavecore WV-200HS
  • TRENDnet TEW-656HG
  • Pheenet WAS-105R
  • Airlink101 AR700HSN
  • Cerio WMR-200N
  • 4ipnet HSG200
  • Cipherium W1110
  • LevelOne WHG-1000
  • Kozumi K-500HPG
  • Wiborne HSG-100
  • USC W1110
  • RayTalk RA-5n5
  • Cenwell CAP-952X
  • LanReady AP952X
  • Wavecore WV-100IA
  • Pheenet WAP-854NP
  • Cerio WM-200N
  • Kozumi K-520WPG
  • Wiborne WAP-100
• 2 Port
  • 4ipnet EAP200
  • 4ipnet EAP206
  • Cipherium A210
  • Cipherium A216
  • USC A210
  • USC A216
  • RayTalk RA-1000
  • (not listed, redirects to LanReady FCC ID) OvisLink AirLive WIAS-3200N (FCC ID: ODMWIAS32N)

Per 4ipnet's manual...

• 192.168.1.254 IP for the Private subnet, no authentication required, admin:admin credentials
• 192.168.11.254 IP for the Public subnet, authentication required
• Default SSIDs of HSG200-1 (private, disabled by default, however?) and HSG200-2 (public)
  • WiGLE shows a few HSG200-2 SSIDs - w/ 06:1F:D4 (4) or 06:11:6B (1) OUIs