ADATA S510 60GB (AS510S3-60GM-C)
From TechInfoDepot
Jump to navigationJump to search60GB SATA III SandForce 6 GB/sec 2.5" Solid State Drive | |
![]() | |
Brand • Model • Rev |
ADATA S510 60GB |
---|---|
Model Part Number |
AS510S3-60GM-C |
Interface |
SATA III |
Form factor |
2.5" |
Controler |
SandForce SF-2281VB1-SDC |
Flash1 Chip |
Micron 29F64G08CBAAA x 8 |
Flash1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (MLC) |
Flash flags |
25nm, asynchronous |
RAM1 Size |
? MiB |
Vendor stated capacity: 60 GB55.857 GiB <br />0.0545 TiB <br />57,197.331 MiB <br />60,000 MB <br />59,975,748,331.745 B <br /> Usable capacity: 60 GiB0.0586 TiB <br />61,440 MiB <br />64.451 GB <br />64,450.56 MB <br />64,424,509,440 B <br /> | |
Retail | |
(Est.) initial retail price (in USD): | $100 |
UPC |
842243006469 (UPC DB, On eBay) |
EAN |
4713435793459 (UPC DB, On eBay) |
ASIN |
B005TFGX0C ![]() |
SandForce not currently documented.
Overview
BPML
, E186014
, 94-V0
and S511ZZC1
are marked on the board from a unit with:
- Serial number:
1C1020154550
- ROM version:
20D Dec 20 2010 Build 288571
- CRP version:
101 Oct 11 2011 Build 345997
- Micron 29F64G08CBAAAWP 8GB NAND (MLC) part listing
Pictures
Notes
Serial
Serial console (115200 baud, 8n1, 3.3V levels) is available as the J4
jumper near the opposite edge of the board from the SATA connector, together with what looks likely to be an unpopulated ribbon cable connection; possibly JTAG.
This particular unit's firmware doesn't seem to boot correctly. The serial console output was:
[ROM] PORRST [ROM] Chip ID 0x200026BB *** ROM Rev 20D Dec 20 2010 Build 288571 *** [ROM] Try BCH[1]: CP=33 EC=54 EP=485 [ROM] Load CRP *** CRP Rev 101 Oct 11 2011 Build 345997 *** [ROM] Load FWR éýÞ^ހýÞýÞýޘºýހºýހýÞýÞý!ޜ [... junk follows ...]
When the J3
jumper is shorted on the board, the ROM firmware enters the bootloader and waits for a firmware upload:
[ROM] PORRST [ROM] Chip ID 0x200026BB *** ROM Rev 20D Dec 20 2010 Build 288571 *** [ROM] Force Download: waiting for Download Microcode Command... [ROM] Waiting for Link to come up... [ROM] Link is UP. [ROM] Hard Reset ===> Link is Down. [ROM] PHY Ready [ROM] Sig Sent [ROM] Undec Cmd 0xec [ROM] Undec Cmd 0xef [ROM] Data Cmd [ROM] READ EXT CMD [ROM] Data Cmd [ROM] READ EXT CMD [ROM] Data Cmd [ROM] READ EXT CMD [ROM] Data Cmd [ROM] READ EXT CMD [ROM] Data Cmd [ROM] READ EXT CMD [ROM] Data Cmd [ROM] READ EXT CMD
See also
Models
- ADATA S510 60GB - Micron 29F64G08CBAAA
- ADATA S510 120GB - Micron 29F64G08CBAAA (25nm, 3000 P/E cycles, async)
- ADATA S511 60GB - Intel 29F64G08AAME1
- ADATA S511 120GB - Intel 29F64G08AAME1
- ADATA S511 240GB - Intel 29F16B08CAME1
- ADATA S599 64GB -
- ADATA S599 128GB - Intel 29F64G08CAMDB (34nm)
- ADATA S599 256GB - Intel 29F16B08JAMDB (34nm)