ALFA Network AP120C-AC

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
WiFi Indoor Ceiling AP
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev ALFA Network AP120C-AC
FCC ID 2AB874018
Type access point
CPU1 checkY Qualcomm IPQ4018
CPU1 Type ARMv7 Cortex-A7
CPU1 Speed 717 MHz ( 4 cores )
Flash1 Chip Brand? Model?
Flash1 Size 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND)
Flash2 Size 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR)
RAM1 Size 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3)
RAM1 Chip Brand? Model?
ETH chip1 Qualcomm IPQ4018
Switch Qualcomm Atheros QCA8075
Ethernet Port Count 2-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: 00:C0:CA (10 E, 31 W)
Ethernet OUI: 00:C0:CA (10 E, 31 W)

Stock bootloader U-Boot
Expansion IF types none specified
PoE 802.3af, standard
Power 12 VDC, ? A
Serial Port (UART) yes

Flags:
Bluetooth 4.0

Other
Manuf/OEM/ODM Arcadyan Iconnect 4018
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
FCC approval date 30 August 2019
Radio 1
Chip1 Qualcomm IPQ4018
Wireless interface OUI 00:C0:CA
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm IPQ4018
Wireless interface OUI 00:C0:CA
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 FCC ID
ALFA Network MatrixPro22AB874018
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
ALFA Network AP120CAtherosAtherosAtheros
ALFA Network AP120C-ACQualcommQualcommQualcomm
ALFA Network AP120C-AXQualcommQualcommQualcomm

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented ALFA Network devices with specifications, see ALFA Network.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),
• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Overview

  • Model Number: Matrix Pro 2, Matrix 2, Matrix 2X, Matrix 2-EX,
AP120C-AC, AP120CU-AC, IWA-AP120, APAC-5824, WA512G,
Range-ACX, Range-ACFCC, N52Q

Flashing

Flashing OpenWrt

Target: ipq40xx
Subtarget: generic
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 19.07.0
Current supported version: 24.10.4
WLAN Hardware: Qualcomm Atheros IPQ4018
WLAN Comment: 2x2:2 MIMO
Installation method(s):
GUI OEM, see git-commit
Comment:
This board uses dual-image feature (128 MB NAND is divided into two 64 MB partitions: 'rootfs1' and 'rootfs2')
git • >>
ipq40xx: add support for ALFA Network AP120C-AC
ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm
IPQ4018 + QCA8075 platform.

Specification:

- Qualcomm IPQ4018 (717 MHz)
- 256 MB of RAM (DDR3)
- 16 MB (SPI NOR) + 128 MB (SPI NAND) of flash
- 2x Gbps Ethernet, with 802.3af PoE support in one port
- 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922)
- 3x U.FL connectors
- 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas
- Atmel/Microchip AT97SC3205T TPM module (I2C bus)
- TI CC2540 Bluetooth LE module (USB 2.0 bus)
- 4x LED (all driven by GPIO)
- 1x button (reset)
- 1x USB 2.0 (optional, not installed in indoor version)
- DC jack for main power input (12 V)
- UART header available on PCB (2.0 mm pitch)

Flash instruction:

1. This board uses dual-image feature (128 MB NAND is divided into two
   64 MB partitions: 'rootfs1' and 'rootfs2').
2. Before update, make sure your device is running firmware no older
   than v1.1 (previous versions have incompatible U-Boot).
3. Use 'factory' image in vendor GUI or for sysupgrade tool, without
   preserving settings.

Signed-off-by: Piotr Dymacz

See also