ALFA Network AP121F
From TechInfoDepot
Jump to navigationJump to search
| bgn (N150) | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 802.11n AP/Router | |||||||||||||||||||||
 | |||||||||||||||||||||
| WikiDevi.wi-cat.ru | ALFA Network AP121F | ||||||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||||||
| OpenWrt | Supported | ||||||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||||||
| Platform | |||||||||||||||||||||
| Brand • Model • Rev | ALFA Network AP121F | ||||||||||||||||||||
| FCC ID | none specified | ||||||||||||||||||||
| Type | travel router | ||||||||||||||||||||
CPU1  | Atheros AR9331 | ||||||||||||||||||||
| CPU1 Type | MIPS 24Kc | ||||||||||||||||||||
| CPU1 Speed | 400 MHz | ||||||||||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||||||||||
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||||||
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||||||
| Stock bootloader | U-Boot | ||||||||||||||||||||
| Expansion IF types | none specified | ||||||||||||||||||||
| Serial Port (UART) | yes | ||||||||||||||||||||
|
| |||||||||||||||||||||
|
| |||||||||||||||||||||
| Other | |||||||||||||||||||||
|
| |||||||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||||||||||||||||||
| Retail | |||||||||||||||||||||
| Availability | End of Life | ||||||||||||||||||||
| Radio 1 | |||||||||||||||||||||
| Chip1 | Atheros AR9331 | ||||||||||||||||||||
| Wireless interface OUI | none specified | ||||||||||||||||||||
| Antenna Connector Type | none specified | ||||||||||||||||||||
| MIMO status | 1x1:1 | ||||||||||||||||||||
| Wireless Standard | IEEE 802.11b/g/n | ||||||||||||||||||||
| 802.11n | up to 150 Mbps | ||||||||||||||||||||
| 802.11g | up to 54 Mbps | ||||||||||||||||||||
| 802.11b | up to 11 Mbps | ||||||||||||||||||||
| WiFi Operating Frequency | 2.4 GHz | ||||||||||||||||||||
| |||||||||||||||||||||
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented ALFA Network devices with specifications, see ALFA Network.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 17.01.3
Current supported version: 25.12.0
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 17.01.3
Current supported version: 25.12.0
LAN Hardware: Atheros AR9331
WLAN Hardware: Atheros AR9331
Installation method(s):
U-Boot web recovery, see git-commit
Recovery method(s):
U-Boot web recovery
WLAN Hardware: Atheros AR9331
Installation method(s):
U-Boot web recovery, see git-commit
Recovery method(s):
U-Boot web recovery
| git • >> |
|---|
ar71xx: add support for ALFA Network AP121F ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users. Device is based on Atheros AR9331 WiSoC and is running a custom version (updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz - 1x microSD (optional, on separate PCB) - 3x LED, 1x button, 1x switch - UART header on PCB Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. |
