AMIT CDM531AM

bgn (N150)
WiFi Mobile Router
Homepage	Product page
WikiDevi.wi-cat.ru	AMIT CDM531AM
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	AMIT CDM531AM
FCC ID	PBLCDM531AM
Type	mobile hotspot
CPU1	Ralink RT3050
CPU1 Type	MIPS 24KEc
CPU1 Speed	320 MHz 16-bit
Flash1 Chip	Eon EN29LV320BT-70TIP
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	EtronTech EM63A165TS-6G
802dot11 OUI: 00:50:18 (15 E, 14 W)
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	5 VDC, 1.2 A
Connector type	USB Female Mini-B
Flags: portable, 3G capable
Other
Default IP address: 192.168.123.254 the IP 192.168.123.254 is used by 28 additional devices of which 13 are AMIT devices Default login user: blank Default login password: admin blank:admin credentials used by 278 additional devices of which 10 are AMIT devices
Retail
FCC approval date	13 May 2010
Country of manuf	China
Radio 1
Chip1	Ralink RT3050
Wireless interface OUI	00:50:18
Antenna Connector Type	none specified
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented AMIT device with specifications, see AMIT.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"11340Y20GA00003B1" is silkscreened on the board in the FCC photos.

The device seems to be using a SiGe SE2597L / 2597L Power Amplifier IC.

Default credentials are from the FCC manual.

The manual says the default SSID is the same as the MAC address.

Assumed 00:50:18 (AMIT) OUI based on the FCC label