ASUS DSL-N16

multiple revisions of this device, use caution

bgn (N300)
300Mbps Wi-Fi VDSL/ADSL Modem Router
Homepage	Product page
Wikipedia	Asus routers
WikiDevi.wi-cat.ru	ASUS DSL-N16
3rd Party Firmware
dd-wrt	Not Supported
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	ASUS DSL-N16 A1
Serial number prefix	90IG0020-BM3000
FCC ID	none specified
Type	wireless router, dsl modem
CPU1	MediaTek MT7510
CPU1 Type	MIPS 34Kc
CPU1 Speed	not specified
Flash1 Chip	GigaDevice GD25Q128
Flash1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	ESMT M14D5121632A
ETH chip1	MediaTek MT7510
Switch	MediaTek MT7510
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	12 VDC, 2 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header
Flags: VDSL2, ADSL2+
Additional chips VDSL2/ADSL2 Line Driver (LD);MediaTek;MT7555;;1;
Other
Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1324 additional devices of which 173 are ASUS devices
Retail
(Est.) release date	13 September 2015
EAN	4712900080612 (UPC DB, On eBay)
ASIN	B01LXYBLJS
Country of manuf	China
Physical
Dimensions	190 mm x 35 mm x 235 mm
Weight	225 g
Radio 1
Chip1	MediaTek MT7592
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand ASUS DSL-N16 MediaTek MediaTek ASUS DSL-N16U MediaTek MediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented ASUS device with specifications, see ASUS.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

Model Part Num: 90IG0020-BM3000

• Ethernet WAN allows to use as an DSL modem router or stand-alone wireless router
• Compatible with VDSL2, ADSL2/2+, fiber and cable services for complete future-proofing
• Fast Ethernet ports for the reliable internet performance
• Four independent SSIDs for flexible and secure Wi-Fi network configuration
• PPTP VPN server and PPTP/L2TP VPN client support
• VDSL/ADSL WAN multi service for IPTV support

Additional specifications

per ASUS's product page

• Memory: Flash: 16MB, RAM: 64MB (DDR2)
• Antenna: 2x external 2dBi antenna
• Ports: xDSL: 1x ADSL2+ (RJ11)

LAN: 4x FE (RJ45) 10/100 BaseT

• Power Adapter:

AC Input : 100~240V (50~60HZ)

DC Output : 12V / 0.5A

• Dimensions (W x H x D): 190 mm x 35 mm x 235 mm
• Weight: 225 g

Links of Interest

Forum threads

• On ADSLgr.com

Spec. aggregators

• On SpeedGuide.net
• On HWupgrade

JTAG-Serial Info

Serial

Boot log

DRAMC V2.2.0.2 (0) MT751020 at Thu Mar 31 12:04:09 CST 2016 free bootbase Memory size 64MB flash base: bc000000 Found SPI Flash 16MiB GD25Q128 at 0xbc000000 Bootloader version: 3.1 Search PHY addr and found PHY addr=8 Not found TC Phy Press reset button to boot command mode. Press any key in 3 secs to enter boot command mode. ................................... Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000 75xx: 0x0 Uncompressing [LZMA] ... done. Linux version 2.6.36 (root@localhost) (gcc version 4.3.4 (GCC) ) #1 SMP Tue Nov8 ISPRAM0: PA=00310000,Size=00008000,enabled DSPRAM0: PA=1dff8000,Size=00001000,enabled flash_init: flash_base:bc000000 flash_init: flash_base:bc000000 memsize:64MB Ralink MT751020 SOC prom init bootconsole [early0] enabled CPU revision is: 00019555 (MIPS 34Kc) Determined physical RAM map: memory: 03fe0000 @ 00020000 (usable) Wasting 1024 bytes for tracking 32 unused pages Zone PFN ranges: Normal 0x00000020 -> 0x00004000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000020 -> 0x00004000 3 available secondary CPU TC(s) PERCPU: Embedded 7 pages/cpu @81083000 s7264 r8192 d13216 u65536 pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16224 Kernel command line: es=1 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=0006498c Readback ErrCtl register=0006498c nmi base is 810c4200 Memory: 60660k/65408k available (3160k kernel code, 4748k reserved, 645k data, ) SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:64 CPU frequency 648.00 MHz Using 266.667 MHz high precision timer. console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 34K sync es set to 1. Config7: 0x80080500 Limit of 4 TCs set TLB of 64 entry pairs shared by 2 VPEs VPE 0: TC 0 1 2, VPE 1: TC 3 IPI buffer pool of 16 buffers CPU revision is: 00019555 ((null)) TC 1 going on-line as CPU 1 CPU revision is: 00019555 ((null)) TC 2 going on-line as CPU 2 CPU revision is: 00019555 ((null)) TC 3 going on-line as CPU 3 Brought up 4 CPUs NET: Registered protocol family 16 MT7510_pcie_init check pcie link up status: isRC0_LINKUP=0 isRC1_LINKUP=1 registering PCI controller with io_map_base unset bio: create slab <bio-0> at 0 pci 0000:00:01.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x200] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0x20000000-0x200fffff] pci 0000:00:01.0: bridge window [mem pref disabled] PCI: Enabling device 0000:00:01.0 (0000 -> 0002) NET: Registered protocol family 8 NET: Registered protocol family 20 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1 TC3162 hardware watchdog module loaded. squashfs: version 4.0 (2009/01/31) Phillip Lougher JFFS2 version 2.2 (NAND) (ZLIB) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. msgmni has been set to 118 io scheduler noop registered (default) ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162 brd: module loaded tc3162 mtd init: mt6573_nand_init enter MediaTek MT6573 Nand driver init, version v2.0 tc3162: flash device 0x01000000 at 0x1c000000 tc3162: Found SPIFLASH 16MiB GD25Q128 Creating 7 MTD partitions on "tc3162": 0x000000000000-0x000000010000 : "bootloader" 0x000000010000-0x000000020000 : "romfile" 0x000000020000-0x00000016de44 : "kernel" mtd: partition "kernel" doesn't end on an erase block -- force read-only 0x00000016de44-0x0000008ede44 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-y 0x000000020000-0x000000ec0000 : "tclinux" 0x000000ec0000-0x000000fc0000 : "jffs2" 0x000000fc0000-0x000001000000 : "reservearea" PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 RT3xxx EHCI/OHCI init. u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (947 buckets, 3788 max) ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 GRE over IPv4 demultiplexor driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 212k freed busybox init and set aff init started: BusyBox v1.00 (2018.11.12-18:24+0000) multi-call binary Sat Jan 1 00:00:00 UTC 2011 chmod: /userfs/profile.cfg: Read-only file system module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint tcsmux version: tcsmux V1.1.0.0 (Nov 13 2018-02:22:21). tcportbind version: tcportbind V1.1.0.0 (Feb 5 2014-17:25:04). vlantag_drv_init TCSUPPORT_IPV6 TC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Nov 13 2018-02:22:13). tccicmd V1.1.0.0 (Nov 13 2018-02:22:18) the number of cfg node is 76 register a node 0 register a node 1 regislogAccess_init ter a nodeLanguageSwitch_init 2 rvendorCfgFile_init egister a node 3rpstorm_init reThe number of cache node is 5 [do_parse_romfile, 27]Start [tc_parse_romfile, 245]Start [tc_parse_romfile, 257]opername(/dev/mtdblock1) [tc_parse_romfile, 260]check rom file(/dev/mtdblock1) [check_romfile, 108]pathname(/dev/mtdblock1) [check_romfile, 117]load XML file. mxml: Bad control character 0x1f not allowed by XML standard! [check_romfile, 174]2nd load XML file. [check_romfile, 204]verify rom file. [check_romfile, 217]return tree Check romfile pass! [tc_parse_romfile, 382]rechecknum(0) [tc_parse_romfile, 389]laod backup romfile [loadRomfile, 77](1) [loadRomfile, 114]BK_ROMFILE_FLAG mtd[readflash]:device=reservearea tclen=65536 tcoffset=0 Unlocking reservearea ... Reading from reservearea to /tmp/tc_backupromfile ... [BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 65536 0 reserva [tc_parse_romfile, 396]check backup romfile [check_romfile, 108]pathname(/tmp/tc_backupromfile) [check_romfile, 117]load XML file. mxml: Bad control character 0x1f not allowed by XML standard! [check_romfile, 174]2nd load XML file. [check_romfile, 204]verify rom file. [check_romfile, 217]return tree [tc_parse_romfile, 416]backup romfile is already exist. Dualwan set wan_primary=8 Dualwan set wan_secondary=-1 killall: wpa_supplicant: no process killed goto wlan_write!!killall: wpa_supplic wlan_write---goto fopen!!ant: nWPSActiveStatus = NULL o WPSOOBActive = NULL prReCounterActive = NULL ocWPSGenPinCode = NULL ess killed write_wlan_AutoChannelSkipList -(0x20) write_wlan_profile() freq=0: Can not get the attribute wl0_HT_BADecline correct. write_wlan_profile() freq=0: Can not get the attribugenerate miniupnpd.conf te wl0_HT_STBC correctly so use the default value 1. write_wlan_profile() freq=0: Can not get the attribute wl0_location_code correc. _gen_upnp_conf ==>syslog_write error, get WriteFlashInterval value failed ==>syslog_write error, get UpdateInterval value failed ==>syslog_write error, get AllLogSave value failed [cfgmgr](SIGCHLD:P207).. insmod raeth driver femac.c:v1.00-NAPI 29.Mar.2011 eth0: FE MAC Ethernet address: 60:xx:xx:xx:xx:xx ifconfig: ra0: error fetching interface information: Device not found 7510_debug: dmt_base_addr : bf900000 ADSL DMT initialization starting Begin AdslTaskInit..... End AdslTaskInit Begin to request IRQ 20 DMT:Succeed to request IRQ 20 Initializing ADSL F/W 5.5.2.10 ...... Initializing ADSL F/W ........ done ra0 no private ioctls. TCSUPPORT_WLAN ra0 No such device [main, 767]Init for web interface cfg node lanHost_read: Create node LanHost ! TCSUPPORT_WLAN_MT7592 PCI: Enabling device 0000:01:00.0 (0000 -> 0002) === pAd = c1082000, size = 746648 === <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x <-- RTMPAllocAdapterBlock, Status=0 device_id =0x7603 RtmpChipOpsHook(507): Not support for HIF_MT yet! mt7603_init()--> mt_bcn_buf_init(224): Not support for HIF_MT yet! <--mt7603_init() Cannot find device "br0" Mirror/redirect action on killall: tcapi: no process killed cfg_manager start to init server socket SIOCGIFFLAGS: No such device Ebtables v2.0 registered killall: ntpclient: no process killed setup_receive:: bind... pool.ntp.org: Unknown host eth0: starting interface. EPhy debug(8): tcPhyVerLookUp() in MT7510FE, EPhy debug(8)(15): tcPhyVerLookUp() out PhyPart debug: tcPhyInit() in , tcphyver=15, phyaddr=8, eco=0x0 phyaddr = 8 PhyPart debug: tcPhyInit() out , r31=0xb000 EPhy debug(12): tcPhyVerLookUp() in MT7510Ge,Internal check flag: fgMT7510Ge_INT=0x0, eco=0x50003 EPhy debug(12)(16): tcPhyVerLookUp() out PhyPart debug: tcPhyInit() in , tcphyver=16, phyaddr=12, eco=0x0 7510Ge, phyaddr= (12,12) debug... ,phyaddr=12 ,eco=0x50003 PhyPart debug: tcPhyInit() out , r31=0xb000 Ralink HW NAT Module Enabled IP check use Black List device eth0 entered promiscuous mode TCSUPPORT_WLAN: ifconfig TCSUPPORT_WLAN_PERSSID_SWITCH disabled! (2)Going to bring up WiFi interfaces!! TCSUPPORT_WLAN_WDS SSH TC3162 hardware watchdog initialized Ethernet Media-Type Support monitorcfgmgr Copyright (C) 2013 ASUS Corp. Renjie_Lee@asus.com Jan 1 00:00:13 monitorcfgmgr[377]: [start monitorcfgmgr] four ports SIOCGIFFLAGS: No such device interface elan.1 does not exist! ERROR: trying to remove VLAN -:elan.1:- error: No such device SIOCGIFFLAGS: No such device interface elan.2 does not exist! ERROR: trying to remove VLAN -:elan.2:- error: No such device SIOCGIFFLAGS: No such device interface elan.3 does not exist! ERROR: trying to remove VLAN -:elan.3:- error: No such device SIOCGIFFLAGS: No such device interface elan.4 does not exist! ERROR: trying to remove VLAN -:elan.4:- error: No such device SIOCGIFFLAGS: No such device interface elan.5 does not exist! ERROR: trying to remove VLAN -:elan.5:- error: No such device SIOCGIFFLAGS: No such device interface elan.6 does not exist! ERROR: trying to remove VLAN -:elan.6:- error: No such device device eth0 is already a member of a bridge; can't enslave it to bridge br0. ethphxcmd used greatest stack depth: 13688 bytes left Added VLAN with VID == 1 to IF -:eth0:- WARNING: VLAN 1 does not work with many switches, consider another number if you have problems. device elan.1 entered promiscuous mode Added VLAN with VID == 2 to IF -:eth0:- device elan.2 entered promiscuous mode Added VLAN with VID == 3 to IF -:eth0:- ip used greatest stack depth: 13656 bytes left device elan.3 entered promiscuous mode Added VLAN with VID == 4 to IF -:eth0:- device elan.4 entered promiscuous mode br0: port 1(eth0) entering disabled state * Phyaddr=8 RegAddr=00 value=8000 * Phyaddr=9 RegAddr=00 value=8000 * Phyaddr=10 RegAddr=00 value=8000 * Phyaddr=11 RegAddr=00 value=8000 [ used greatest stack depth: 13632 bytes left TSARM: MT7510 ATM SAR driver 1.0 init atmInit ATM SAR Time Base: 7065 atmInit 1.1 Version ATM SAR Reset ============================================== atm_init_wrappter atm_init_wrappter br2684_init Mac = 60:xx:xx:xx:xx:xxpppoatm_init ============================================== ATM SAR RX NAPI Mode mt7510_netdev_start atm_dev: MT7510 ATM Ethernet address: 60:45:CB:16:4D:D8 mt7510_atm_init: register_netdev success mt7510_atm_init: open genenral device mt7510_netdev_open atm_dev: starting interface. general device status: 3 atm_msg_buffer_init txMsgNum: 720 rxMsgNum: 512 register autopvc cmd to sys Channel:0, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0 Channel:1, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0 Channel:2, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0 Channel:3, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0 Channel:4, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0 Channel:5, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0 Channel:6, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0 Channel:7, Type:1, Q0:0, Q1:0, Q2:0, Q3:0, Q4:0, Q5:0, Q6:0, Q7:0 gzip used greatest stack depth: 13528 bytes left [write_cur_romfile_in_flash, 456]write running romfile. Unlocking romfile ... Writing from /tmp/var/romfile.cfg.gz to romfile ... [w] [write_cur_romfile_in_flash, 464]write backup romfile in flash. [write_backup_romfile]/userfs/bin/mtd writeflash /tmp/var/romfile.cfg.gz 65536 a mtd[writeflash]:device=reservearea tclen=65536 tcoffset=0 tcfilelen =65536 Unlocking reservearea ... Writing from /tmp/var/romfile.cfg.gz to reservearea ... enter real action -----tclen:0x10000,tcoffset:0x0 writeflash: write 0 'st sector,start from 0x0,0x10000 bytes writeflash: total write 0x10000 bytes TCAPI save ok. Jan 1 00:00:18 crond[595]: crond 2.3.2 dillon, started, log level 8 The test lab:255 log cicmd 0 (wan vdsl2 set sra on ) US bitswap on,DS bitswap on log cicmd 1 (wan vdsl2 set bs_tx on ) log cicmd 2 (wan vdsl2 set bs on ) G.VECTOR on gvt_ns_flag off Set SNRM OFFSET = 5.0 db Set Agc Vref1 = 65535 ; Vref2 = 65535 ; Vref3 = 65535 log cicmd 3 (wan vdsl2 set target_snrm 32767 ) PROFILE17A_MULTI_MODE log cicmd 4 (wan vdsl set agc 65535 65535 65535 65535 ) log cicmd 5 (wan vdsl set upbo 255 ) log cicmd 6 (wan vdsl set sync_sym 10 ) G.inp mode ANNEXA annex auto-switch flag = 0 DLA: start br0: port 5(elan.4) entering forwarding state br0: port 5(elan.4) entering forwarding state br0: port 4(elan.3) entering forwarding state br0: port 4(elan.3) entering forwarding state br0: port 3(elan.2) entering forwarding state br0: port 3(elan.2) entering forwarding state br0: port 2(elan.1) entering forwarding state br0: port 2(elan.1) entering forwarding state Ralink HW NAT Module Disabled Ralink HW NAT Module Enabled IP check use Black List done device br1 already exists; can't create bridge with the same name check_and_set_iptv_ifname: a9fef1b1(169.254.241.177) _ifconfig: name=br2 flags=1043 IFUP addr=169.254.241.177 netmask=255.255.0.0 check_and_set_iptv_ifname: a9fe828b(169.254.130.139) _ifconfig: name=br3 flags=1043 IFUP addr=169.254.130.139 netmask=255.255.0.0 check_and_set_iptv_ifname: a9fe88eb(169.254.136.235) _ifconfig: name=br4 flags=1043 IFUP addr=169.254.136.235 netmask=255.255.0.0 upd========================insmod iptable_filter======================= ate_wan_state(wan0_, 5, 0) update_wan_state(wan1_, 5, 0) update_wan_state(wan2_, 5, 0) update_wan_state(wan3_, 5, 0) update_wan_state(wan4_, 5, 0) update_wan_state(wan5_, 5, 0) update_wan_state(wan6_, 5, 0) update_wan_state(wan7_, 5, 0) update_wan_state(wan8_, 0, 0) update_wan_state(wan9_, 5, 0) update_wan_state(wan10_, 5, 0) update_wan_state(wan11_, 5, 0) update_wan_state(wan12_, 5, 0) ========================insmod ipt_REJECT======================= /etc/isp0.conf /etc/isp1.conf /etc/isp2.conf /etc/isp3.conf /etc/isp4.conf /etc/isp5.conf /etc/isp6.conf /etc/isp7.conf SIOCGIFFLAGS: No such device /etc/isp8_0.conf ==>Error, socket or ioctl error for mulifctl SIOCGIFFLAGS: No such device SIOCSIFHWADDR: No such device SIOCSIFADDR: No such device Plugin libpppoe.so loaded. RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5 pppd: unrecognipppd used greatest stack depth: 13392 bytes left zed option 'nas8_0' pppd version 2.4.5 Usage: pppd [ options ], where options are: <device> Communicate over the named device <speed> Set the baud rate to <speed> <loc>:<rem> Set the local and/or remote interface IP addresses. Either one may be omitted. asyncmap <n> Set the desired async map to hex <n> auth Require authentication from peer connect <p> Invoke shell command <p> to set up the serial line crtscts Use hardware RTS/CTS flow control defaultroute Add default route through interface file <f> Take options from file <f> modem Use modem control lines mru <n> Set MRU value to <n> for negotiation See pppd(8) for more options. /etc/isp10_7.conf /etc/isp11.conf /etc/isp12.conf sh: /userfs/bin/zebra: not found sh: /userfs/bin/ripd: not found Radvd is disabled dhcp6s is disabled! info, udhcpd (v0.9.9-pre) started error, Unable to open /etc/udhcpd.leases for reading goto wlan_boot!!!Interface doesn't accept private ioctl... set (8BE2): Network is down goto write_wlan_first_profile()!!write_wlan_AutoChannelSkipList -(0x20) write_wlan_first_profile() freq=0 : Can not get the attribute wl0_HT_BADecline . write_wlan_first_profile() freq=0 : Can not get the attribute wl0_HT_STBC corre. write_wlan_first_profile() freq=0 : Can not get the attribute wl0_location_code. TX_BCN DESC a1fb8000 size = 320 RX[0] DESC a1fba000 size = 2048 RX[1] DESC a1fbb000 size = 2048 cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! FW Version:CL173766-A FW Build Date:20170925114906 CmdAddressLenReq:(ret = 0) CmdFwStartReq: override = 1, address = 1048576 CmdStartDLRsp: WiFI FW Download Success AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1 NVM is BIN mode 1. Phy Mode = 14 Cal Free IC!! now bb MainSsid mac 60:xx:xx:xx:xx:xx Country Region from e2p = ffff tssi_1_target_pwr_g_band = 34 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(14): Not support for HIF_MT yet! NICInitializeAsic(585): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> mt7603_init_mac_cr()--> AsicSetMacMaxLen(1829): Set the Max RxPktLen=1024! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 AntCfgInit(2570): Not support for HIF_MT yet! MCS Set = ff ff 00 00 01 networkmap is gn. launch it. AsicSetRalinkBurstMode(4233): Not support for HIF_MT yet! RTMPSetPiggyBack(879): Not support for HIF_MT yet! AsicSetTxPreamble(4220): Not support for HIF_MT yet! AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 Main bssid = 60:45:cb:16:4d:d8 <==== rt28xx_init, Status=0 @@@ ed_monitor_init : ===> @@@ ed_monitor_init : <=== jiffies=ffff9928, POLLING_MODE_DETECT_INTV=300 ifconfig used greatest stack depth: 13200 bytes left device ra0 entered promiscuous mode br0: port 1(ra0) entering forwarding state br0: port 1(ra0) entering forwarding state RTMPIoctlMAC():wrq->u.data.length=18, pointer(7fe51240)=60150004=0003001c! RTMPIoctlMAC():after trim space, ptr len=17, pointer(822d5000)=60150004=0003001! ra0 mac:[0x21a04]:0003001c RTMPIoctlMAC():wrq->u.data.length=18, pointer(7faf7be0)=60200618=D7E87D10! RTMPIoctlMAC():after trim space, ptr len=17, pointer(822d5000)=60200618=D7E87D1! ra0 mac:[0x10618]:d7e87d10 rai0 no private ioctls. rai0 no private ioctls. rai0 no private ioctls. ==>Set_Debug_Proc() <==Set_Debug_Proc(RTDebugLevel = 0) BusyBox v1.00 (2018.11.12-18:24+0000) multi-call Disable Virtual Server / Port . binary Usage: route [{add|del|delete}] nf_conntrack_rtsp v0.6.21 loading port #0: 554 nf_nat_rtsp v0.6.21 loading insmod used greatest stack depth: 12992 bytes left generate miniupnpd.conf _gen_upnp_conf launch upnp start_miniupnpd. force(1) stop upnp first Unknown applet: add_ovpn_fw_rules /userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/miniupnpd.conf & upnpd_boot _gen_upnp_conf start_miniupnpd. force(1) stop upnp first route: SIOC[ADD|DEL]/userfs/bin/miniupnpd -P /var/log/upnpd.pid -f /var/tmp/min& RT: File exists [write_cur_romfile_in_flash, 456]write running romfile. Unlocking romfile ... Writing from /tmp/var/romfile.cfg.gz to romfile ... [w] [write_cur_romfile_in_flash, 464]write backup romfile in flash. [write_backup_romfile]/userfs/bin/mtd writeflash /tmp/var/romfile.cfg.gz 65536 a mtd[writeflash]:device=reservearea tclen=65536 tcoffset=0 tcfilelen =65536 Unlocking reservearea ... Writing from /tmp/var/romfile.cfg.gz to reservearea ... enter real action -----tclen:0x10000,tcoffset:0x0 writeflash: write 0 'st sector,start from 0x0,0x10000 bytes writeflash: total write 0x10000 bytes TCAPI save ok. killall: klogd: no process killed ftp switch turn on sip switch turn on h323 switch turn on rtsp switch turn on l2tp switch turn on,sw_state= iptables: Bad rule (does a matching rule exist in that chain?). ipsec switch turn on,sw_state= iptables: Bad rule (does a matching rule exist in that chain?). iptables: No chain/target/match by that name. ifconfig: ppp80: error fetching interfa #### wan_primary: [] ce information: Device not found killall: utelnetd: no process killed get_iptv_ifname: nas8_0 check_and_set_iptv_ifname: a9fe94c4(169.254.148.196) _ifconfig: name=nas8_0 flags=1043 IFUP addr=169.254.148.196 netmask=255.255.0.0 nas8_0: No such device wol_boot client_list_boot. launch networkmap arpstorm_boot Arpstorm_Entry_runin=0 RTS debug message OFF! cmd[0]=restart_pppoe_relay cmd[1]=8 [1880 service:handle_notifications +41] running: 3 pppoe_relay http_update_allowed_client-restrict_client(0): (0)clients log cicmd 0 (wan dmt2 set largeD 2 ) start_pptpd: getpid= 569 init_ramusage() msgget ok set_msqid=0 ret_val=0 mtd[readflash]:device=reservearea tclen=65536 tcoffset=131072 Unlocking reservearea ... Reading from reservearea to /var/log/tmp_file ... Can't find Node(Info_dot1q), create it. load: current_uptime = 0m, save_utime = 60m decomp: fname=/var/tmp/rstats-speed.gz decomp: gzip -dc /var/tmp/rstats-speed.gz > /var/tmp/rstats-uncomp != 0 load: speed_count = 0 load: read source= save_path= load_history: fname=/var/tmp/rstats-history.gz decomp: fname=/var/tmp/rstats-history.gz Done. decomp: gzip -dc /var/tmp/rstats-history.gz > /var/tmp/rstats-uncomp != 0 decomp: fname=/var/tmp/rstats-history.gz decomp: gzip -dc /var/tmp/rstats-history.gz > /var/tmp/rstats-uncomp != 0 load_history: load failed # Enable direct rule stop_nat_rules: apply the redirect_rules! iwpriv used greatest stack depth: 12596 bytes left iptables-restor used greatest stack depth: 12332 bytes left calc: add WIRED as #0 calc: sync WIRED calc: add WIRELESS0 as #1 calc: sync WIRELESS0 calc: add ATM as #2 calc: sync ATM grep used greatest stack depth: 12292 bytes left Unknown applet: add_ovpn_fw_rules Warning: Driver for device ra0 has been compiled with version 22 of Wireless Extension, while this program supports up to version 20. Some things may be broken... calc: add PTM0 as #3 calc: sync PTM0 calc: add PTM1 as #4 calc: sync PTM1 calc: add ETHERNETWAN as #5 calc: sync ETHERNETWAN calc: add BRIDGE as #6 calc: sync BRIDGE *reg=00001fe0 value:200d4008 (ext_switch:0) Firmware version=[1.1.2.3] Please press Enter to activate this console. Can't find Node(Vram), create it. Can't find Node(Vram_Entry), create it. Can't find Node(LogAccess_ToFile), create it.

Available boot loader commands

? Print out help messages. help. Print out help messages. go Booting the linux kernel. decomp Decompress kernel image to ram. memrl <addr> Read a word from addr. memwl <addr> <value> Write a word to addr. dump <addr> <len> Dump memory content. jump <addr> Jump to addr. flash <dst> <src> <len> Write to flash from src to dst. flashrd <addr> <len> Read <len> data from flash <addr>. gpioon <gpio> Trigger power, internet, adsl led on. gpiooff <gpio> Trigger power, internet, adsl led off. xmdm <addr> <len> Xmodem receive to addr. miir <phyaddr> <reg> Read ethernet phy reg. miiw <phyaddr> <reg> <value> Write ethernet phy reg. cpufreq <freq num> / <m> <n> Set CPU Freq <156~450>(freq has to be multi) ipaddr <ip addr> Change modem's IP. httpd Start Web Server ddrdrv <..> Change DDR driving length