ASUS RP-AC51
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC750) | |
|---|---|
| AC750 Dual Band WiFi Range Extender | |
 | |
| Homepage | Product page |
| Wikipedia | Asus routers |
| WikiDevi.wi-cat.ru | ASUS RP-AC51 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | ASUS RP-AC51 A1 |
| Serial number prefix | 90IG03Y0-BU2410 |
| FCC ID | MSQ-RPAC4200 |
| IC ID | 3568A-RPAC4200 |
| Type | range extender, media bridge |
CPU1  | Qualcomm Atheros QCA9531 |
| CPU1 Type | MIPS 24Kc |
| CPU1 Speed | 650 MHz |
| Flash1 Chip | Winbond W25Q128JVSIG |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Winbond W971GG6SB-25 |
| ETH chip1 | Qualcomm Atheros QCA9531 |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | none specified |
| Power | 100-240 VAC ~ 50/60 Hz, 0.18 A |
| Connector type | AC (direct) |
| Serial Port (UART) | yes, 4-pin header, J1 |
|
Flags: | |
|
| |
| Other | |
|
Default login user: admin | |
| Manuf/OEM/ODM | SGE (T&W) AP-QCAL0 -0003 Rev1.0 |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | US/CA |
| FCC approval date | 09 April 2020 |
| (Est.) release date | September 2019 |
| ASINs |
B08CQM87S5  B07577ZQTB  |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | Qualcomm Atheros QCA9531 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 11 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Qualcomm Atheros QCA9887 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | U.FL |
| MIMO status | 1x1:1 |
| Wireless Standard | IEEE 802.11a/n/ac |
| 802.11ac | up to 433 Mbps |
| 802.11n | up to 150 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented ASUS devices with specifications, see ASUS.
Overview
- ASUS RP-AC51 - AC750 Dual Band WiFi Range Extender
- FCC ID: MSQ-RPAC4200 (04/09/2020)
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.5
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.5
WLAN Comment: Qualcomm Atheros QCA9531, Qualcomm Atheros QCA9886
Installation method(s):
Asus Firmware Restoration tool, U-Boot TFTP recovery, see git-commit
Recovery method(s):
Asus Firmware Restoration tool, U-Boot TFTP recovery, see git-commit
Installation method(s):
Asus Firmware Restoration tool, U-Boot TFTP recovery, see git-commit
Recovery method(s):
Asus Firmware Restoration tool, U-Boot TFTP recovery, see git-commit
| git • >> |
|---|
ath79: add support for ASUS RP-AC51 Asus RP-AC51 Repeater Category: AC750 300+433 (OEM w. unstable driver) AC1200 300+866 (OpenWrt w. stable driver) Hardware specifications: Board: AP147 SoC: QCA9531 2.4G b/g/n WiFi: QCA9886 5G n/ac DRAM: 128MB DDR2 Flash: gd25q128 16MB SPI-NOR LAN/WAN: AR8229 1x100M Clocks: CPU:650MHz, DDR:600MHz, AHB:200MHz MAC addresses as verified by OEM firmware: use address source Lan/W2G *:C8 art 0x1002 (label) 5G *:CC art 0x5006 Installation: Asus windows recovery tool: install the Asus firmware restoration utility unplug the router, hold the reset button while powering it on release when the power LED flashes slowly specify a static IP on your computer: IP address: 192.168.1.75 Subnet mask 255.255.255.0 Start the Asus firmware restoration utility, specify the factory image and press upload Do not power off the device after OpenWrt has booted until the LED flashing. TFTP Recovery method: set computer to a static ip, 192.168.1.10 connect computer to the LAN 1 port of the router hold the reset button while powering on the router for a few seconds send firmware image using a tftp client; i.e from linux: $ tftp tftp> binary tftp> connect 192.168.1.1 tftp> put factory.bin tftp> quit |
Pictures
See also
Categories:
- ASUS
- Embedded system/range extender
- Embedded system/media bridge
- Embedded System Qualcomm Atheros
- Embedded System QCA9531
- Qualcomm Atheros
- Embedded System MIPS 24Kc
- Embedded System
- Manuf SGE (T&W)
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9887
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation
