ASUS RT-AC1200 v2

From TechInfoDepot
(Redirected from ASUS RT-AC1200L)
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac (AC1200)
Wireless-AC1200 Dual Band Router
Homepage Product page
Wikipedia Asus routers
WikiDevi.wi-cat.ru ASUS RT-AC1200 v2
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev ASUS RT-AC1200 v2 (US)
FCC ID MSQ-RTAC4A00
IC ID 3568A-RTAC4A00
Board ID AP-MTK024-0001
Type wireless router
CPU1 checkY MediaTek MT7628DAN
CPU1 Type MIPS 24KEc
CPU1 Speed 580 MHz
Flash1 Chip Winbond W25Q128JVSQ
Flash1 Size 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR)
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 MediaTek MT7628DAN
Switch MediaTek MT7628DAN
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
Power 12 VDC, 0.5 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, 3.3V TTL, (57600 8N1)
Other

Default SSID: ASUS_WW
Default IP address: 192.168.50.1
the IP 192.168.50.1 is used by 23 additional devices
of which 23 are ASUS devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1358 additional devices
of which 209 are ASUS devices

Manuf/OEM/ODM SGE (T&W) AP-MTK024
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 19 September 2019
Country of manuf China
Radio 1
Chip1 MediaTek MT7628DAN
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7613BEN
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
ASUS RT-AC1200 v1MediaTekMediaTekMediaTek
ASUS RT-AC1200 v2MediaTekMediaTekMediaTek
ASUS RT-AC1200+BroadcomBroadcomBroadcom
ASUS RT-AC1200GBroadcomBroadcomBroadcom
ASUS RT-AC1200GEQualcommQualcommQualcomm Atheros
ASUS RT-AC1200GPBroadcomBroadcomBroadcom
ASUS RT-AC1200GUMediaTekMediaTekMediaTek
ASUS RT-AC1200HPMediaTekMediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented ASUS devices with specifications, see ASUS.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),
867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Flashing

Flashing OpenWrt

Target: ramips
Subtarget: mt76x8
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 22.03.0
Current supported version: 25.12.2
Unsupported Functions:
DFS
LAN Hardware: MediaTek MT7628DAN
WLAN Hardware: MediaTek MT7628DAN, MediaTek MT7613BEN
WLAN Comment: MIMO 2x2:2 on both bands
Installation method(s):
Asus Firmware Restoration tool, U-Boot TFTP recovery, see git-commit
Recovery method(s):
U-Boot TFTP recovery, see git-commit
git • >>
ramips: add support for ASUS RT-AC1200-V2
Hardware specifications:
SoC: MT7628DAN MIPS_24KEc@580MHz 2.4G-n 2x2
WiFi: MT7613BEN 5G-ac 160MHz 2x2
Switch: 4x100M built-in SoC
Flash: 16MB W25Q128JVSQ SPI-NOR
DRAM: 64MB built-in SoC

MAC addresses as verified by OEM firmware:
use address source
Lan/Wan/2G *:60 factory 0x4 (label)
5G *:64 factory 0x8000

Serial console: 57600,8n1

Installation:

Asus windows recovery tool:

install the Asus firmware restoration utility
unplug the router, hold the reset button while powering it on
release when the power LED flashes slowly
specify a static IP on your computer:
IP address: 192.168.1.75
Subnet mask 255.255.255.0
start the Asus firmware restoration utility, specify the factory image
and press upload
do NOT power off the device after OpenWrt has booted until the LED flashing
after flashing OpenWrt, there will be first no 5GHz Wifi available probably,
wait until blinking finishes and do a reboot
TFTP Recovery method:

set computer to a static ip, 192.168.1.75
connect computer to the LAN 1 port of the router
hold the reset button while powering on the router for a few seconds
send firmware image using a tftp client; i.e from linux:
$ tftp
tftp> binary
tftp> connect 192.168.1.1
tftp> put factory.bin
tftp> quit
do NOT power off the device after OpenWrt has booted until the LED flashing
after flashing OpenWrt, there will be first no 5GHz Wifi available probably,
wait until blinking finishes and do a reboot

See also