ASUS RT-AX55
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax (AX1800) | |||||
|---|---|---|---|---|---|
| AX1800 Dual Band WiFi 6 Router | |||||
|
| |||||
| Homepage | Product page | ||||
| Wikipedia | Asus routers | ||||
| WikiDevi.wi-cat.ru | ASUS RT-AX55 | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Supported | ||||
| Tomato any flavor | Status Unknown | ||||
| Gargoyle | Status Unknown | ||||
| Platform | |||||
| Brand • Model • Rev | ASUS RT-AX55 | ||||
| Serial number prefix | 90IG06C0-BO3100 | ||||
| FCC ID | MSQ-RTAX8A00 | ||||
| Type | wireless router | ||||
| CPU1 | Broadcom BCM6755 | ||||
| CPU1 Type | ARM Cortex-A7 | ||||
| CPU1 Speed | 1.5 GHz ( 4 cores ) | ||||
| Flash1 Chip | Macronix MX30LF1G18AC-TI | ||||
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||
| RAM1 Chip | Nanya NT5CC128M16ER-EK | ||||
| ETH chip1 | Broadcom BCM6755 | ||||
| Switch | Broadcom BCM53134O | ||||
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types | none specified | ||||
| Power | 12 VDC, 2 A | ||||
| Connector type | barrel | ||||
|
Flags: | |||||
|
| |||||
| Other | |||||
|
Default IP address: 192.168.50.1 | |||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||
| Retail | |||||
| FCC approval date | 27 August 2019 | ||||
| (Est.) release date | May 2020 | ||||
| Country of manuf | China | ||||
| Radio 1 | |||||
| Chip1 | Broadcom BCM6755 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | U.FL | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11b/g/n/ax | ||||
| 802.11ax | up to 574 Mbps | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11g | up to 54 Mbps | ||||
| 802.11b | up to 11 Mbps | ||||
| WiFi Operating Frequency | 2.4 GHz | ||||
| Radio 2 | |||||
| Chip1 | Broadcom BCM6755 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | U.FL | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11a/n/ac/ax | ||||
| 802.11ax | up to 1201 Mbps | ||||
| 802.11ac | up to 867 Mbps | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11a | up to 54 Mbps | ||||
| WiFi Operating Frequency | 5 GHz | ||||
| |||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented ASUS devices with specifications, see ASUS.
Overview
See also: ASUS and ASUS RT-AX1800
Links of Interest
Reviews
- ASUS RT-AX56U and RT-AX58U Wi-Fi 6 Routers on Reddit
- ASUS RT-AX56U Wi-Fi 6 Router Review on NDI (ES)
- ASUS RT-AX56U V2 (RT-AX55U) Wi-Fi 6 Router on AC|WiFi
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
Target: qualcommax
Subtarget: ipq50xx
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
Subtarget: ipq50xx
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
LAN Hardware: Realtek RTL8367S
WLAN Hardware: IPQ5018 + QCN6122
Installation method(s):
GUI OEM
Recovery method(s):
Asus Firmware Restoration tool
WLAN Hardware: IPQ5018 + QCN6122
Installation method(s):
GUI OEM
Recovery method(s):
Asus Firmware Restoration tool
| git • >> |
|---|
qualcommax: add support for TP-Link Archer AX55 v1
TP-Link Archer AX55 v1 is an IPQ5018 Wi-Fi 6 router.
Hardware:
SoC: Qualcomm IPQ5018 (dual Cortex-A53)
RAM: 512 MiB
Flash: 128 MiB SPI-NAND (dual firmware slots)
Switch: Realtek RTL8367S (5x GbE), 2.5G HSGMII trunk to gmac1
WiFi: IPQ5018 2.4 GHz + QCN6122 5 GHz (ath11k)
USB: 1x USB 3.0 port, SuperSpeed, using the IPQ5018 SS uni PHY;
the port's 5 V rail is a GPIO-switched regulator wired as the
PHY's vdd-supply, the way the MR5500 does it
Button: Reset, WPS/Wi-Fi
LED: power, LAN, WAN (green/orange), 2.4G, 5G, USB
All five front jacks are RTL8367S ports (DSA): blue "WAN" = wan,
LAN1-4 = lan1..lan4, over the 2.5G HSGMII trunk.
The factory MAC is the "default-mac" file in the tp_data UBIFS volume
(there is no raw nvmem cell for it). The volume is attached and mounted
read-only during preinit, so board.d assigns the wired MACs (label MAC
for lan/eth0, +1 for wan) the usual way and the ath11k caldata hotplug
derives the Wi-Fi MACs (+2/+3) from the same mount - the same scheme
the mt7981 archer-ax80-v1 uses for its tp_data. gmac1 has no nvmem MAC
source, so the DSA conduit is pinned to the label MAC in board.d to
keep it stable across boots.
The board data files live in firmware_qca-wireless, where they were
merged as f2c37a6b9d1d; this commit pins the ipq-wifi package to that
revision and adds the package entry for the board.
Note on revisions: some units labelled "v1" carry an RTL8367D-family
switch (chip id 0x6642) instead of the RTL8367S. rtl8365mb cleanly
declines it ("unrecognized switch"), so such a unit boots with no wired
ports, and with Wi-Fi off by default it is only reachable via the
vendor web recovery (or serial). RTL8367D support in rtl8365mb is being
worked on by others; until it lands the wiki page carries a prominent
warning to identify the switch before flashing. v2/v4 are entirely
different hardware and are not covered by this image.
Installation (serial console on the JP1 header, 115200 8N1, 1.8 V; note
the RX trace is gapped and must be bridged to type): interrupt U-Boot,
TFTP-boot the initramfs image to 0x44000000, "bootm", then "sysupgrade -n".
A serial-free path (a telnet-enabled resigned stock image flashed from the
vendor web UI, then writing the OpenWrt image to the inactive slot) is
documented on the device wiki page; that path consumes the
initramfs-factory.ubi artifact, which is the initramfs kernel wrapped in
a UBI image so it can be written straight into the inactive rootfs
partition with mtd from the running stock firmware.
Recovery to stock: hold Reset while powering on, set the PC to
192.168.0.10, and upload an official signed TP-Link image at
http://192.168.0.1.
Signed-off-by: Stanislaw Pal <kuncy7@gmail.com>
Co-Authored-By: Claude Opus 5
Link: https://github.com/openwrt/openwrt/pull/24197
Signed-off-by: Robert Marko
|
Pictures
See also
Models
- FCC ID: MSQ-RTAXJ300 (2020-06-17) • (HND-963178_BASE)/96750GW
- ASUS RT-AX53U (AX1800) • AX1800 Dual Band WiFi 6 Router • PPage
- ASUS RT-AX1800U (AX1800) • AX1800 Dual Band WiFi 6 Router • PPage
- ASUS RT-AX1800S (AX1800) • AX1800 Dual Band WiFi 6 Router] • PPage
- FCC ID: MSQ-RTAX8E00 • MediaTek MT7621AT/MT7905DAN/MT7975DN
- ASUS RT-AX55 (AX1800) • AX1800 Dual Band WiFi 6 Router • PPage
- ASUS RT-AX1800 (AX1800) • AX1800 Dual Band WiFi 6 Router • PPage
- FCC ID: MSQ-RTAX8A00 (2020-08-06)
- ASUS RT-AX56U (AX1800) • (HND-947622_BASE)/BCM53134 • Review
- FCC ID: MSQ-RTAXHY00 (2019-08-27)
- ASUS RT-AX56U v2 (AX1800) • AX1800 Dual Band WiFi 6 Router
- ASUS 4G-AX56 (AX1800) • Cat.6 300Mbps Dual-Band WiFi 6 LTE Router • PPage
- ASUS RP-AX56 (AX1800) • Dual-Band Wireless Repeater
- FCC ID: MSQ-RPAX4W00 (2020-08-11)
- ASUS RT-AX58U (AX3000) • (HND-963178_BASE)/96750GW • Review
- FCC ID: MSQ-RTAXJ300 (2020-06-17)
- ASUS RT-AX68U (AX6000) • (HND-962118_BASE)
- FCC ID: MSQ-RTAXIA00 (2020-08-05) 19V/1.75A
- ASUS RT-AX82U (AX5400) • (HND-963178_BASE)/96750GW
- FCC ID: MSQ-RTAXJ300 (2020-06-17)
- ASUS DSL-AX82U (AX5400) • BCM63178/96750GW (VDSL2)
- ASUS RT-AX86S (AX5700) • AX5700 Dual Band WiFi 6 Router • KS • PPage
- ASUS RT-AX86U (AX5700) • (HND-962118_BASE)/BCM84880 • PPage
- FCC ID: MSQ-RTAXI600 (2020-02-12)
- ASUS RT-AX88U (AX6000) • (HND-94908_BASE)/BCM53134
- ASUS RT-AX89X (AX6000) • (IPQ8078/QCA8337/AR8033)
- ASUS RT-AX92U (AX6100) • (HND-94908_BASE)
- ASUS RT-AX95U (AX11000) • (HND-94908_BASE)/BCM84880
- FCC ID: MSQ-RTHR00 (2020-03-05) • ASUS GT-AX11000
- ASUS RT-AX95Q (AX6600) • ZenWiFi XT8 • (HND-947622_BASE)/BCM53134
- ASUS RT-AC95U (AC3000) • ZenWiFi CT8 • (IPQ4019/QCA9884/QCA8072)
Categories:
- ASUS
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM6755
- Broadcom
- Embedded System ARM
- Embedded System Cortex-A7
- Embedded System BCM53134O
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation