AVM FRITZ!Box 4050
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac+ax (AX3000) | |
|---|---|
| Ideal starter model with Wi-Fi 6 | |
 | |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | AVM FRITZ!Box 4050 |
| FCC ID | none specified |
| Type | wireless router |
CPU1  | Qualcomm IPQ5018 |
| CPU1 Type | ARM Cortex-A53 |
| CPU1 Speed | 1.0 GHz ( 2 cores ) |
| Flash1 Chip | Winbond W25N01GWZEIG |
| Flash1 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size | 512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3L) |
| RAM1 Chip | Winbond W634GU6QB-11 |
| ETH chip1 | Qualcomm IPQ5018 |
| Switch | Qualcomm Atheros QCA8337 |
| Ethernet Port Count |
1-1GbE-WAN 3-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Port-based vlan | yes |
| 802.1q vlan | yes |
|
802dot11 OUI: none specified | |
| Stock bootloader | EVA |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 1.5 A |
| Serial Port (UART) | yes, 3.3, 115200 / 8N1 |
|
| |
|
| |
|
| |
| Radio 1 | |
| Chip1 | Qualcomm IPQ5018 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n/ax |
| 802.11ax | up to 574 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Qualcomm QCN6102 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11a/n/ac/ax |
| AX-QAM | up to 2402 Mbps |
| 802.11ax | up to 1201 Mbps |
| 802.11ac | up to 867 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented AVM devices with specifications, see AVM.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
Target: qualcommax
Subtarget: ipq5018
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
Subtarget: ipq5018
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: unknown
Current supported version: snapshot
LAN Hardware: Qualcomm QCA8337
WLAN Hardware: Qualcomm QCN5018, QCN6102
Installation method(s):
EVA FTP, see git-commit
Recovery method(s):
EVA FTP, see git-commit
WLAN Hardware: Qualcomm QCN5018, QCN6102
Installation method(s):
EVA FTP, see git-commit
Recovery method(s):
EVA FTP, see git-commit
Please insert instructions here
Categories:
- AVM
- Embedded system/wireless router
- Embedded System Qualcomm
- Embedded System IPQ5018
- Qualcomm
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System Qualcomm Atheros
- Embedded System QCA8337
- Qualcomm Atheros
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System QCN6102
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
- New Entry
