AVM FRITZ!Box 7490
| abgn+ac (AC1750) | |
|---|---|
|
AVM FRITZ!Box 7490 AC1750 WLAN Modem Router (3x3 MU-MIMO, VDSL/ADSL2+, DECT, Media Server) | |
|
| |
| Homepage | Product page |
| WikiDevi.wi-cat.ru | AVM FRITZ!Box 7490 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | AVM FRITZ!Box 7490(HW185) |
| FCC ID | none specified |
| Type | wireless router |
| CPU1 | Lantiq (Intel) PSB 80920 |
| CPU1 Type | MIPS 34Kc |
| CPU1 Speed | 500 MHz ( 2 cores ) |
| CPU2 | Qualcomm Atheros QCA9558 |
| Flash1 Chip | Macronix S29F4G08ABADA-WP |
| Flash1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| Flash2 Chip | Macronix S25L8035EM2I-10G |
| Flash2 Size | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | Elpida E1108AJBG-8E x 2 |
| RAM2 Size | 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM2 Chip | Winbond W9751G6KB-25 |
| ETH chip1 | Lantiq (Intel) PSB 80920 |
| Switch | Lantiq (Intel) PSB 80920 |
| Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Stock bootloader | EVA |
| Expansion IF types | USB 3.0 |
| USB ports | 2 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 2.5 A |
| Connector type | barrel |
| Serial Port (UART) | yes, (115200 8N1) |
|
Flags: | |
|
Additional chips | |
| Other | |
|
Default SSID: FRITZ!Box 7490 | |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | End of Life |
| (Est.) release date | 20 August 2013 |
| ASIN |
B00EO777DI |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | Qualcomm Atheros QCA9558 |
| Wireless interface OUI | CC:CE:1E, C8:0E:14 |
| Antenna Connector Type | none specified |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 450 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Qualcomm Atheros QCA9880-AR1A |
| Wireless interface OUI | CC:CE:1E, C8:0E:14 |
| Antenna Connector Type | none specified |
| MIMO status | 3x3:3 |
| Wireless Standard | IEEE 802.11a/n/ac |
| 802.11ac | up to 1300 Mbps |
| 802.11n | up to 450 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented AVM devices with specifications, see AVM.
Overview
AVM supply has 3 different OEM firmware versions for the 7490. At this time, it is known that Germany use AnnexB, while international use AnnexA so at a minimum, there must be at least 2 hardware versions, but with the 3rd firmware image for Belgium there might even be 3 different hardware versions of this device. The bulk of the documentation below is based on the International version of the 7490 (which also had markings for AU/NZ included in few places).
- AC1750 WLAN Modem Router (HW185) - VDSL/ADSL2+, DECT, Media Server
- CPU: Lantiq PSB 80920, xDSL: PSB 80190 (VRX208), RAM: 256MB
- mips34_512MB_xilinx_vdsl_dect446_4geth_2ab_isdn_nt_te_pots_2usb_host
- AC1750 3x3 MU-MIMO, 1x GbE WAN, 4x GbE LAN, 2x USB 3.0 ports
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Subtarget: xrx200
Package architecture: mips_24kc
Supported Since Commit
Support started version: 24.10.0
Current supported version: 25.12.2
WiFi, DECT, ISDN
LAN Hardware: Atheros AR8035
WLAN Hardware: Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880
Installation method(s):
EVA FTP
Recovery Comment:
AVM provides a recovery tool for Windows
Comment:
See also https://boxmatrix.info/wiki/FRITZ!Box_7490
| git • >> |
|---|
lantiq: add support for AVM Fritzbox 7490 This adds support for the Fritzbox 7490 device. It contains two SoCs, one Lantiq without WiFi and one QCA9558 with 2.4GHz and 5 GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM and is booted by using a remoteproc kernel module and is not supported with this commit. The devices were manufactured with varying NAND chips which requires Micron and non-Micron versions of the images. Specifications: - SoC: Lantiq 500 MHz - RAM: 256 MB - Storage: 512 MB NAND, 1MB FLASH - Wireless, separate SOC QCA9558 with 128MB RAM (not supported yet): · Qualcomm-QCA9558 w/ 3×3 MIMO for 2.4GHz 802.11b/g/n · Qualcomm-QCA9880 w/ 3×3 MIMO for 5GHz 802.11a/ac · AG71xx ethernet - Ethernet: Built-in AR 803x, 7 port 4 phy switch, 4x 1000/100/10 port, Port 5 is fixed and connected to the WASP SOC - Renesas µPD720202 USB3 PCIe, requires firmware binary on the device - VDSL2 modem Unsupported: - DECT and ISDN telephony Installation: Check which NAND the device has by using the following procedure with stock firmware: Go to to http://<fritzbox_ip>/support.lua, download the support data file and search for string "NAND device" to get the manufacturer kernel output. Use Micron image if Micron is displayed otherwise the non-Micron image. Use the eva_ramboot.py script to boot the initramfs image. Follow the procedure to interrupt booting by ftp into 192.168.178.1 within 5 seconds after poweron. Then transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. For making USB work, an renesas xhci firmware file (e.g. v2026) is needed and it should be copied to /lib/firmware/ (file name renesas_usb_fw.mem). Signed-off-by: Daniel Kestrel |
Pictures
See also
- AVM FRITZ!Box 7590 - AC2600 WLAN Modem Router
- (4x4 MU-MIMO, VDSL-35b/ADSL2+, DECT, Media Server)
- AVM FRITZ!Box 7582 - AC1750 WLAN Modem Router
- (BCM63138, G.fast VDSL/ADSL2+, DECT, Media Server)
- AVM FRITZ!Box 7580 - AC2600 WLAN Modem Router
- (4x4 MU-MIMO, VDSL/ADSL2+, DECT, Media Server)
- AVM FRITZ!Box 7560 - AC1300 WLAN Modem Router
- (VDSL/ADSL2, VoIP, DECT, Media Server)
- AVM FRITZ!Box 7530 - AC1300 WLAN Modem Router
- (VDSL/ADSL2, 35b, Mesh, VoIP, DECT, USB)
- AVM FRITZ!Box 7490 - AC1750 WLAN Modem Router
- (VDSL/ADSL2+, DECT, Media Server)
- AVM FRITZ!Box 7430 - N450 WLAN Modem Router
- (VDSL/ADSL2+, VoIP/DECT, Mediaserver)
- AVM FRITZ!Box 7390 - N300 WLAN Modem Router
- (VDSL/ADSL, DECT-Basis, Media Server)
- AVM FRITZ!Box 5491 - AC1750 WLAN Modem Router
- (GPON, Mesh, DECT, VoIP, Media Server)
- AVM FRITZ!Box 5490 - AC1750 WLAN Modem Router
- (GPON, Mesh, DECT, VoIP, Media Server)
- AVM FRITZ!Box 4040 - AC1300 WLAN Router
- (GbE WAN, 4x LAN, USB 2.0/3.0, Mediaserver)
- AVM FRITZ!Box 4020 - N450 WLAN Router
- (FE WAN, 4x LAN, USB 2.0, Mediaserver)
- AVM FRITZ!Box 3490 - AC1750 WLAN Modem Router
- (VDSL/ADSL2+, 4x GbE LAN, Mediaserver)
- AVM FRITZ!Box 3272 - N450 WLAN Router
- AVM
- Embedded system/wireless router
- Embedded System Lantiq (Intel)
- Embedded System PSB 80920
- Lantiq (Intel)
- Embedded System MIPS 34Kc
- Embedded System
- Embedded System Qualcomm Atheros
- Embedded System QCA9558
- Qualcomm Atheros
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9880-AR1A
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- BoxMatrix
- English Documentation