Acme Systems Fox Board G20
From TechInfoDepot
Jump to navigationJump to searchFOX Board G20 | |
Homepage | |
---|---|
3rd Party Firmware | |
dd-wrt | |
OpenWrt |
Incompatible |
Tomato any flavor |
Incompatible |
Platform | |
Brand • Model • Rev |
Acme Systems Fox Board G20 V1 |
Type |
single-board computer |
CPU1 |
Atmel AT91SAM9G20 |
CPU1 Type |
ARM926EJ-S |
CPU1 Speed |
400 MHz |
Flash1 Chip |
Atmel AT45DB021D |
Flash1 Size |
256 KiB 0.25 MiB <br />262,144 B <br />2,048 Kib <br />2 Mib <br />2.441406e-4 GiB <br /> |
RAM1 Size |
? MiB |
RAM1 Chip |
Brand? Model? |
RAM2 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM2 Chip |
Samsung K4M51323PI-HG75 |
ETH chip1 |
Atmel AT91SAM9G20 |
ETH chip2 |
Davicom DM9161AEP |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Ethernet OUI: 00:04:25 | |
Stock bootloader |
AcmeBoot 1.22 |
Stock FW OS |
Linux 4.19.209 Debian 10 |
Expansion IF types |
USB 2.0, Micro SD Card slot |
USB ports |
3 |
SD/MMC Slots |
1 |
USB Hub Compatible |
Untested |
Power |
5 VDC, 1 A |
Connector type |
barrel 4 mm (OD) 1.7 mm (ID) 0.9 mm (LEN) |
Serial Port (UART) |
yes, 6-pin header, populated, 3.3V TTL, (115200 8N1) |
Flags: Micro SD Card slot, RTC w/ battery, UART, GPIO, I2C, SPI | |
Additional chips | |
Other | |
Default IP address: acquired via DHCP | |
Retail | |
Availability | Long Term Availability |
Country of manuf | Italy |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Davicom chipsets with specifications, see Davicom.
For a list of all currently documented Acme Systems device with specifications, see Acme Systems.
Overview
Device is the Acme Systems Netus G20 SoM mounted
- on a carrier board.
Hardware specification
- CPU: Atmel AT91SAM9G20
- @400MHz (ARM926EJ-S)
- Memory: 64MB (SDRAM) SDR
- Storage: 256KB SPI NOR Flash,
- TF card (max.32GB)/MMC card
- Network: 1x Fast Ethernet port
- USB: 2x USB 2.0 Host, 1x Micro USB Device
- Power Source: 5V 1A via barrel or Berg Connector