Actiontec 802AI

b (B11)
11 Mbps Wireless Access Point
Support	Support page
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Actiontec 802AI
FCC ID	LNQ802AI
Type	access point
CPU1	No Wires Needed Poldhu
CPU1 Type	ARM940
Flash1 Chip	Atmel AT49BV1614-12TC
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip	Samsung K4S641632H-TC75
ETH chip1	No Wires Needed Poldhu
ETH chip2	Lucent LU3X31T
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	5 VDC, 2.5 A
Connector type	barrel
Flags: schematics, block diagram
Retail
FCC approval date	07 December 2001
Radio 1
Chip1	No Wires Needed Poldhu
Chip2	Intersil HFA3863
Chip3	Intersil HFA3683A
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Lucent (Agere) chipsets with specifications, see Lucent.
For a list of all currently documented No Wires Needed (NWN) chipsets with specifications, see No Wires Needed.

For a list of all currently documented Actiontec device with specifications, see Actiontec.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

Actiontec's FCC docs reference the Poldhu chip as a ISL3865CK.

"ACTIONTEC", "47-0045-28AF", and "802AI Rev. 1A" is silkscreened on the board in the FCC photos.

The manual shows a sample SSID of default and a MAC with a 00:20:E0 (Actiontec) OUI.