Actiontec AU802C

bg (G54)
802.11g Access Point
Support	Support page
WikiDevi.wi-cat.ru	Actiontec AU802C
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Actiontec AU802C
FCC ID	LNQAU802C
Type	access point
CPU1 Y	Ubicom IP2022
CPU1 Type	Ubicom 32
CPU1 Speed	not specified
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	ASIX AX88796L
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	PCMCIA (32-bit)
PCMCIA slots	1
Power	5 VDC, 1.6 A
Connector type	barrel
Flags: schematics
Other
Default SSID: Actiontec (1 addl. devices) Default IP address: 192.168.1.240 the IP 192.168.1.240 is used by 21 additional devices of which 0 are Actiontec devices Default login user: Admin Default login password: Admin Admin:Admin credentials used by 16 additional devices of which 0 are Actiontec devices
Retail
FCC approval date	09 June 2003
Radio 1
Radio1 module	Actiontec 802CIG
Radio1 module IF	PCMCIA (32-bit)
Chip1	Intersil ISL3890
Chip2	Intersil ISL3690
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

ASIX not currently documented.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.

For a list of all currently documented Actiontec devices with specifications, see Actiontec.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"ACTIONTEC" and "802CIAG REV. 3A" appears to be silkscreened on the PCMCIA wireless module.

Per the schematics, the device appears to have 0.5MB Flash and a 1Mbit SRAM.

Per the manual, the default SSID is Actiontec.