Actiontec PK5001A

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Wireless N ADSL2 Modem/Router
Wireless 11n ADSL2+ Modem Gateway
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Actiontec PK5001A
FCC ID LNQPK5001A
IC ID LNQDL02BPK5001A
Type wireless router, dsl modem
CPU1 checkY Lantiq PSB 50810
CPU1 Type MIPS 34Kc
CPU1 Speed not specified ( 2 cores )
Flash1 Chip ESMT F59L1G81A-25T
Flash1 Size 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Size 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip ESMT W13S5121632A-5T
ETH chip1 Lantiq PSB 50810
Switch Lantiq PSB 6970
Ethernet Port Count 4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: A0:A3:E2
Ethernet OUI: A0:A3:E2

Stock bootloader U-Boot 2010.06 Lantiq
Stock FW OS Linux 2.6.32.42 OpenWrt Backfire
Expansion IF types none specified
Power 12 VDC, 1 A
Connector type barrel

Flags:
ADSL2+

Other

Default SSID: CenturyLinkXXXX (3 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 819 additional devices
of which 16 are Actiontec devices
Default login user: admin
Default login password: randomly generated
admin:randomly generated credentials used by 28 additional devices
of which 2 are Actiontec devices

Retail
FCC approval date 05 May 2012
Country of manuf China
Radio 1
Chip1 Lantiq PSB 8221
Chip2 Lantiq PSB 8304
Wireless interface OUI A0:A3:E2
Antenna Connector Type U.FL
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.

For a list of all currently documented Actiontec devices with specifications, see Actiontec.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"Actiontec" and "06703B." is silkscreened on the board in the FCC photos.

RAM specs are per the FCC photos.. but the FCC photos also show

the device with a 128MB SK hynix H27U1G8F2BTR-BC Flash.

Actiontec's page for the PK5001A states uses 64MB Flash.

  • CPU: Lantiq PSB 50810 - XWAY ARX168 (PSB 50810 EL)

The wireless chipset is Lantiq WAVE300 based.

  • Lantiq PSB 8221 - XWAY WAVE300 (PSB 8221EL V1.1)
  • Lantiq PSB 8304 - XWAY WAVE300 (PSB 8304 V1.1)

The FE Switch appears to be a TANTOS.

  • Lantiq PSB 6970 - XWAY TANTOS (PSB 6970 HL V1.3)

Possible 40:8B:07 OUI (on a label including the device MAC

affixed to the board in the FCC internal photos)...