Actiontec R1000H
From TechInfoDepot
Jump to navigationJump to search
bgn (N300) | |
---|---|
Wireless N Gigabit Ethernet Router | |
![]() | |
Homepage | Product page |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Partial Support |
Tomato any flavor | Status Unknown |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Actiontec R1000H |
FCC ID | none specified |
Type | wireless router |
CPU1 ![]() | Broadcom BCM6368 |
CPU1 Type | MIPS BMIPS4350 |
CPU1 Speed | 400 MHz ( 2 cores ) 32-bit |
Flash1 Chip | Brand? Model? |
Flash1 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip | Brand? Model? |
ETH chip1 | Broadcom BCM6368 |
Switch | Broadcom BCM53115 |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard | IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader | CFE |
Expansion IF types | Mini PCI, USB 2.0 |
Mini PCI slots | 1 |
USB ports | 1 |
USB Hub Compatible | Untested |
Power | 10 VDC, 1.6 A |
Connector type | barrel |
Serial Port (UART) | yes, 3.3V TTL, (115200 8N1) |
| |
| |
Other | |
| |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
Retail | |
Availability | End of Life |
Radio 1 | |
Radio1 module | unknown |
Radio1 module IF | Mini PCI |
Chip1 | Broadcom BCM4322 |
Wireless interface OUI | none specified |
Antenna Connector Type | none specified |
MIMO status | 2x2:2 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 300 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
Radio cor_rev | 16 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Actiontec devices with specifications, see Actiontec.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
![]() | DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: bcm63xx
OpenWrt Subtarget: bcm6368
OpenWrt Package architecture: mips_mips32
Support started version: 18.06.0
Current supported version: 23.05.6
Unsupported Functions:
WiFi 2.4GHz partly, HomePNA
LAN Comment:
1 HPNA coaxial port at the BCM53115 switch (port5)
OpenWrt Target: bcm63xx
OpenWrt Subtarget: bcm6368
OpenWrt Package architecture: mips_mips32
Support started version: 18.06.0
Current supported version: 23.05.6
Unsupported Functions:
WiFi 2.4GHz partly, HomePNA
LAN Comment:
1 HPNA coaxial port at the BCM53115 switch (port5)
Please insert instructions here
Categories:
- Actiontec
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM6368
- Broadcom
- Embedded System MIPS
- Embedded System BMIPS4350
- Embedded System BCM53115
- OpenWrt Supported
- Embedded System BCM4322
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- Embedded System
- English Documentation