Actiontec R3010SUW

b (B11)
Wireless Cable/DSL Router
Homepage	Product page
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Actiontec R3010SUW
FCC ID	LNQR3010SUW
Type	wireless router
CPU1	Virata Helium 210-80
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Virata Helium 210-80
ETH chip2	Realtek RTL8019AS
Switch	Kendin KS8995
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	PCMCIA (16-bit), USB 1.1 (slave)
PCMCIA slots	2
USB ports	1
USB Hub Compatible	Untested
Power	? VDC, ? A
Connector type	barrel
Flags: schematics
Other
Default SSID: ACTIONTEC (4 addl. devices) Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 16 are Actiontec devices
Retail
FCC approval date	14 January 2002
Radio 1
Radio1 module	unknown
Radio1 module IF	PCMCIA (16-bit)
Chip1	Intersil Model?
Chip2	Intersil ISL3685
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented GlobespanVirata chipsets with specifications, see GlobespanVirata.

For a list of all currently documented Actiontec device with specifications, see Actiontec.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

The Actiontec P/N for this device is probably GE144000-01.

1x 10Mbit WAN (RTL8019AS), 4x 10/100 LAN (w/ Kendin Switch)

The schematics refer to this device as RENO. See also the Actiontec R3010UW and Actiontec R3010UW(AP)..

Per the manual, the default SSID is ACTIONTEC.