Adtran Bluesocket BSAP-1925
From TechInfoDepot
Jump to navigationJump to search
| abgn (N300) | |
|---|---|
| Indoor Wireless Access Point | |
|
| |
| Homepage | Product page |
| WikiDevi.wi-cat.ru | Adtran Bluesocket BSAP-1925 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | Adtran Bluesocket BSAP-1925 |
| Model Part Number | 1700955F1 |
| FCC ID (fcc.io) | HDCWLAN192XF1 |
| FCC ID (fcc.report) | HDCWLAN192XF1 |
| IC ID | 2250A-WLAN192XF1 |
| Board ID | 7016A0507001 |
| Type | access point |
| CPU1 | Atheros AR9344 |
| CPU1 Type | MIPS 74Kc |
| CPU1 Speed | 560 MHz 32-bit |
| Flash1 Chip | Spansion FL256SAIFRO |
| Flash1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | Nanya NT5TU32M16DG-AC x 2 |
| ETH chip1 | Atheros AR9344 |
| ETH chip2 | Atheros AR8035-A |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Stock bootloader | U-Boot 1.1.4 DB120 |
| Stock FW OS | Linux 2.6.35 |
| Expansion IF types | none specified |
| PoE | 802.3af, standard |
| Power | 12 VDC, 1.25 A |
| Connector type | barrel |
| Serial Port (UART) | yes, internal, 4-pin header, 3.3V TTL |
|
| |
|
| |
| Other | |
|
Default IP address: 192.168.190.1 | |
| Manuf/OEM/ODM | Senao CAP4201AG |
| Retail | |
| FCC approval date | 02 April 2013 |
| ASIN |
B00B1SL1R6 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 | Atheros AR9344 |
| Wireless interface OUI | 00:19:92 |
| Antenna Connector Type | U.FL, RP-SMA |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11a/n |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
| Radio 2 | |
| Chip1 | Atheros AR9382 |
| Wireless interface OUI | 00:19:92 |
| Antenna Connector Type | U.FL, RP-SMA |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Adtran devices with specifications, see Adtran.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"7016A0507001 Ver: 1.00" is silkscreened on the board in the FCC photos.
- This is the same text found on the WatchGuard AP100 (Senao CAP2100AG) and the Senao CAP4200AG.
- A label affixed to the BSAP-1920 model (integral antennas) in the FCC external photos identifies the device as a CAP4200AG.
- The BSAP-192x series are the same hardware, BSAP-1925 antennae are external and detachable RP-SMA, while the BSAP-1920 are internal.
- The 5GHz radio (AR9344) is using two Skyworks (SiGe) SE2537L / 2537L Power Amplifier modules.
- The 2.4GHz radio (AR9382) is using two Microchip (SST) SST12LP15A 2.4GHz Power Amplifier modules.
The default credentials in this entry are per the FCC QSG.
- They are specified as being for SSH access.
The power adapter shown in the FCC external photos is a Powertron Electronics PA1015-2I/PA1015-2I 120125 (100-240VAC ~ 50-60Hz, 0.4A -> 12VDC, 1.25A, 15W max.).
JTAG-Serial Info
Serial
Boot log
| stock boot messages |
|---|
U-Boot 1.1.4 (Oct 3 2012 - 13:28:43)
U-boot DB120
DRAM:
sri
Wasp 1.2
wasp_ddr_initial_config(249): (32bit) ddr2 init
wasp_ddr_initial_config(426): Wasp ddr init done
Tap value selected = 0xd [0x0 - 0x1a]
128 MB
Top of RAM usable for U-Boot at: 88000000
Reserving 211k for U-Boot at: 87fc8000
Reserving 192k for malloc() at: 87f98000
Reserving 44 Bytes for Board Info at: 87f97fd4
Reserving 36 Bytes for Global Data at: 87f97fb0
Reserving 128k for boot params() at: 87f77fb0
Stack Pointer at: 87f77f98
Now running in RAM - U-Boot at: 87fc8000
Flash Manuf Id 0x1, DeviceId0 0x2, DeviceId1 0x19
flash size 32MB, sector count = 512
Flash: 32 MB
BOARD IS NOT CALIBRATED!!!
In: serial
Out: serial
Err: serial
Setting 0xb8116290 to 0x58b02d0f
Net: ag934x_enet_initialize...
loc=a0ff0000 for eth0, [ff] [ff] [ff]
No valid address in Flash. Using generated address
wasp reset mask:c03300
WASP ----> S17 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:0d:fc:06:a9:16
athrs17_reg_init: complete
eth0 up
eth0
Adtran bootloader version 1.0.4
Protect off 9F040000 ... 9F04FFFF
Un-Protecting sectors 4..4 in bank 1
Un-Protected 1 sectors
Erasing Flash...Erase Flash from 0x9f040000 to 0x9f04ffff in Bank # 1
First 0x4 last 0x4 sector size 0x10000
���� 4
Erased 1 sectors
Writing to Flash... write addr: 9f040000
done
Protecting sectors 4..4 in bank 1
Protected 1 sectors
## Booting image at 9f300000 ...
Image Name: Linux Kernel Image
Created: 2018-06-11 20:52:25 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1400641 Bytes = 1.3 MB
Load Address: 80002000
Entry Point: 800061f0
Verifying Checksum at 0x81000040 ...OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 800061f0) ...
## Giving linux memsize in bytes, 134217728
Starting kernel ...
Booting Atheros AR934x
Linux version 2.6.35 (root@jenkins19-hsv) (gcc version 4.5.4 20120201 (prerelease) (Linaro GCC 4.5-2012.02) ) #1 Mon Jun 11 20:51:57 UTC 2018
flash_size passed from bootloader = 32
arg 1: console=ttyS0,115200
arg 2: root=31:06
arg 3: rw
arg 4: rootfstype=jffs2
arg 5: init=/sbin/init
arg 6: mem=128M
CPU revision is: 0001974c (MIPS 74Kc)
ath_sys_frequency: cpu srif ddr srif cpu 560 ddr 450 ahb 225
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: console=ttyS0,115200 root=31:06 rw rootfstype=jffs2 init=/sbin/init mem=128M
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 125868k/131072k available (2940k kernel code, 5204k reserved, 797k data, 196k init, 0k highmem)
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 279.55 BogoMIPS (lpj=559104)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI init:ath_pcibios_init
ath_pcibios_init(326): PCI CMD write: 0x356
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1001ffff 64bit] (PCI address [0x10000000-0x1001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
pdev_fixup_irq pin 0
Returning IRQ 64
pdev_fixup_irq dev->irq 64 slot 0 pin 1 dev 87c10400
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ATH GPIOC major 0
Slow work thread pool: Starting up
Slow work thread pool: Ready
JFFS2 version 2.2. © 2001-2006 Red Hat, Inc.
fuse init (API version 7.14)
msgmni has been set to 245
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
brd: module loaded
****ath_flash_init*****
Creating 13 MTD partitions on "ath-nor0":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000080000 : "u-boot-env"
0x000000050000-0x000000090000 : "Cert"
0x000000090000-0x000000200000 : "Kdump"
mtdoops: Attached to MTD device 3
0x000000200000-0x000000300000 : "/var"
0x000000300000-0x000000580000 : "Kernel A"
0x000000580000-0x000001000000 : "Rootfs A"
0x000001000000-0x000001280000 : "Kernel B"
0x000001280000-0x000001d00000 : "Rootfs B"
0x000001d00000-0x000001e00000 : "/home"
0x000001e00000-0x000001f80000 : "/log"
0x000001ff0000-0x000002000000 : "ART"
0x000001fe0000-0x000001ff0000 : "SENAO"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1966 buckets, 7864 max)
ctnetlink v0.93: registering with nfnetlink.
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
arch/mips/atheros/gpio.c (ath_simple_config_init) JUMPSTART_GPIO: 16
ath_otp_init: Registering OTP success
ath_clksw_init: Registering Clock Switch Interface success
VFS: Mounted root (jffs2 filesystem) on device 31:6.
Freeing unused kernel memory: 196k freed
Boot Bank: A Count: 1
A: 3.2.0-HA-650478 B: 3.0.1-HB-646847
Serial: 1925xxxxxxxxxx
MAC: 00:19:92:xx:xx:xx
===========================
Access Point Console (1925)
===========================
User Access verification
/
Cores disabled.
Detected 5 stored panic files on flash.
AP login:
|
Boot log
| OpenWrt boot messages WIP |
|---|
U-Boot 1.1.4 (Oct 3 2012 - 13:28:43)
U-boot DB120
DRAM:
sri
Wasp 1.2
wasp_ddr_initial_config(249): (32bit) ddr2 init
wasp_ddr_initial_config(426): Wasp ddr init done
Tap value selected = 0xc [0x0 - 0x19]
128 MB
Top of RAM usable for U-Boot at: 88000000
Reserving 211k for U-Boot at: 87fc8000
Reserving 192k for malloc() at: 87f98000
Reserving 44 Bytes for Board Info at: 87f97fd4
Reserving 36 Bytes for Global Data at: 87f97fb0
Reserving 128k for boot params() at: 87f77fb0
Stack Pointer at: 87f77f98
Now running in RAM - U-Boot at: 87fc8000
Flash Manuf Id 0x1, DeviceId0 0x2, DeviceId1 0x19
flash size 32MB, sector count = 512
Flash: 32 MB
BOARD IS NOT CALIBRATED!!!
In: serial
Out: serial
Err: serial
Setting 0xb8116290 to 0x58b02d0f
Net: ag934x_enet_initialize...
loc=a0ff0000 for eth0, [ff] [ff] [ff]
No valid address in Flash. Using generated address
wasp reset mask:c03300
WASP ----> S17 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:0d:fc:06:af:1a
athrs17_reg_init: complete
eth0 up
eth0
Adtran bootloader version 1.0.4
Protect off 9F040000 ... 9F04FFFF
Un-Protecting sectors 4..4 in bank 1
Un-Protected 1 sectors
Erasing Flash...Erase Flash from 0x9f040000 to 0x9f04ffff in Bank # 1
First 0x4 last 0x4 sector size 0x10000
4
Erased 1 sectors
Writing to Flash... write addr: 9f040000
done
Protecting sectors 4..4 in bank 1
Protected 1 sectors
## Booting image at 9f300000 ...
Image Name: MIPS OpenWrt Linux-4.19.72
Created: 2019-09-17 1:37:36 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1797764 Bytes = 1.7 MB
Load Address: 80060000
Entry Point: 80060000
Verifying Checksum at 0x81000040 ...OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 134217728
Starting kernel ...
[ 0.000000] Linux version 4.19.72 (briang@sunny) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r11034-cf6ccef8f2)) #0 Tue Sep 17 01:37:36 2019
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] MIPS: machine is Adtran Bluesocket BSAP-1925
[ 0.000000] SoC: Atheros AR9344 rev 2
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x4a8 with crng_init=0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: console=ttyS0,115200 root=31:06 rw rootfstype=jffs2 init=/sbin/init mem=128M root= rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 122488K/131072K available (4272K kernel code, 172K rwdata, 1008K rodata, 1196K init, 207K bss, 8584K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 560.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
[ 0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
[ 0.008234] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.084812] pid_max: default: 32768 minimum: 301
[ 0.089921] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.096918] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.109915] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.120331] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.126907] pinctrl core: initialized pinctrl subsystem
[ 0.133397] NET: Registered protocol family 16
[ 0.146546] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
[ 0.153031] MEM 0x0000000010000000..0x0000000013ffffff
[ 0.158536] IO 0x0000000000000000..0x0000000000000000
[ 0.183667] PCI host bridge to bus 0000:00
[ 0.188056] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.195304] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.201193] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.208351] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.218293] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[ 0.226016] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[ 0.237072] clocksource: Switched to clocksource MIPS
[ 0.243567] NET: Registered protocol family 2
[ 0.249071] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 0.257259] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.264614] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.271346] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.278180] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.284348] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.291391] NET: Registered protocol family 1
[ 0.299283] Crashlog allocated RAM at address 0x3f00000
[ 0.306223] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 0.320045] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.326190] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.349558] io scheduler noop registered
[ 0.353696] io scheduler deadline registered (default)
[ 0.361383] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[ 0.368476] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.375879] console [ttyS0] disabled
[ 0.379737] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[ 0.388853] console [ttyS0] enabled
[ 0.388853] console [ttyS0] enabled
[ 0.396401] bootconsole [early0] disabled
[ 0.396401] bootconsole [early0] disabled
[ 0.412165] m25p80 spi0.0: s25fl256s1 (32768 Kbytes)
[ 0.417419] 11 fixed-partitions partitions found on MTD device spi0.0
[ 0.424071] Creating 11 MTD partitions on "spi0.0":
[ 0.429156] 0x000000000000-0x000000040000 : "u-boot"
[ 0.435140] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.441580] 0x000000050000-0x000000090000 : "Cert"
[ 0.447401] 0x000000090000-0x000000200000 : "Kdump"
[ 0.453248] 0x000000200000-0x000000300000 : "/var"
[ 0.459063] 0x000000300000-0x000001000000 : "firmware1"
[ 0.470296] 2 uimage-fw partitions found on MTD device firmware1
[ 0.476506] Creating 2 MTD partitions on "firmware1":
[ 0.481787] 0x000000000000-0x0000001c0000 : "kernel"
[ 0.487763] 0x0000001c0000-0x000000d00000 : "rootfs"
[ 0.493643] mtd: device 7 (rootfs) set to be root filesystem
[ 0.501135] 1 squashfs-split partitions found on MTD device rootfs
[ 0.507597] 0x000000550000-0x000000d00000 : "rootfs_data"
[ 0.514033] 0x000001000000-0x000001d00000 : "firmware2"
[ 0.520377] 0x000001d00000-0x000001e00000 : "/home"
[ 0.526235] 0x000001e00000-0x000001f80000 : "/log"
[ 0.532058] 0x000001fe0000-0x000001ff0000 : "SENAO"
[ 0.538001] 0x000001ff0000-0x000002000000 : "art"
[ 0.544778] libphy: Fixed MDIO Bus: probed
[ 0.908999] libphy: ag71xx_mdio: probed
[ 1.007277] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd072, driver=Atheros 8035 ethernet]
[ 1.018423] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 1.027561] NET: Registered protocol family 10
[ 1.037418] Segment Routing with IPv6
[ 1.041333] NET: Registered protocol family 17
[ 1.045990] 8021q: 802.1Q VLAN Support v1.8
[ 1.061340] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[ 1.073976] Freeing unused kernel memory: 1196K
[ 1.078701] This architecture does not have kernel memory protection.
[ 1.085354] Run /sbin/init as init process
[ 2.226134] init: Console is alive
[ 2.229974] init: - watchdog -
[ 2.477090] random: fast init done
[ 3.520859] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.597901] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.615832] init: - preinit -
[ 5.033785] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.273403] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.327921] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.579363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 8.898422] jffs2: notice: (487) jffs2_build_xattr_subsystem: complete building xattr subsystem, 5 of xdatum (0 unchecked, 3 orphan) and 14 of xref (3 dead, 0 orphan) found.
[ 8.917691] mount_root: switching to jffs2 overlay
[ 8.945881] overlayfs: upper fs does not support tmpfile.
[ 8.962263] urandom-seed: Seeding with /etc/urandom.seed
[ 9.192294] procd: - early -
[ 9.195382] procd: - watchdog -
[ 9.849780] procd: - watchdog -
[ 9.853355] procd: - ubus -
[ 9.933713] urandom_read: 5 callbacks suppressed
[ 9.933721] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.947813] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.955996] procd: - init -
Please press Enter to activate this console.
[ 10.854931] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.032161] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
[ 11.040052] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
[ 11.054687] urngd: v1.0.0 started.
[ 11.108871] xt_time: kernel timezone is -0000
[ 11.255733] PPP generic driver version 2.4.2
[ 11.278146] NET: Registered protocol family 24
[ 11.380769] random: crng init done
[ 11.389537] ath: phy0: disabling 2GHz band
[ 11.411196] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12
[ 11.418455] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
[ 11.510861] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xb0000000, irq=14
[ 11.521362] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.047457] br-lan: port 1(eth0) entered blocking state
[ 26.052864] br-lan: port 1(eth0) entered disabled state
[ 26.058645] device eth0 entered promiscuous mode
[ 26.095257] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 33.409209] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 33.431221] br-lan: port 2(wlan1) entered blocking state
[ 33.436826] br-lan: port 2(wlan1) entered disabled state
[ 33.442723] device wlan1 entered promiscuous mode
[ 33.602813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.636967] br-lan: port 3(wlan0) entered blocking state
[ 33.642524] br-lan: port 3(wlan0) entered disabled state
[ 33.648399] device wlan0 entered promiscuous mode
[ 33.653367] br-lan: port 3(wlan0) entered blocking state
[ 33.658903] br-lan: port 3(wlan0) entered forwarding state
[ 33.665091] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 34.438305] br-lan: port 3(wlan0) entered disabled state
[ 39.369374] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 39.376291] br-lan: port 3(wlan0) entered blocking state
[ 39.381843] br-lan: port 3(wlan0) entered forwarding state
[ 40.309696] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 40.316494] br-lan: port 2(wlan1) entered blocking state
[ 40.322044] br-lan: port 2(wlan1) entered forwarding state
BusyBox v1.31.0 () built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r11034-cf6ccef8f2
-----------------------------------------------------
root@OpenWrt:/# cat /proc/cpuinfo
system type : Atheros AR9344 rev 2
machine : Adtran Bluesocket BSAP-1925
processor : 0
cpu model : MIPS 74Kc V4.12
BogoMIPS : 278.93
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp dsp2
Options implemented : tlb 4kex 4k_cache prefetch mcheck ejtag llsc dc_aliases perf_cntr_intr_bit nan_legacy nan_2008 perf
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
root@OpenWrt:/# iwinfo
wlan0 ESSID: "OpenWrt"
Access Point: 00:19:92:xx:xx:xx
Mode: Master Channel: 44 (5.220 GHz)
Tx-Power: 15 dBm Link Quality: unknown/70
Signal: unknown Noise: -95 dBm
Bit Rate: unknown
Encryption: none
Type: nl80211 HW Mode(s): 802.11an
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
wlan1 ESSID: "OpenWrt"
Access Point: 00:19:92:xx:xx:xx
Mode: Master Channel: 6 (2.437 GHz)
Tx-Power: 21 dBm Link Quality: unknown/70
Signal: unknown Noise: -91 dBm
Bit Rate: unknown
Encryption: none
Type: nl80211 HW Mode(s): 802.11bgn
Hardware: 168C:0030 168C:A120 [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy1
|
Categories:
- Adtran
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR9344
- Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System AR8035-A
- Manuf Senao
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Embedded System AR9382
- Embedded System IEEE 802.11b/g/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation