Adtran Bluesocket BSAP-1930

abgn (AN900)
Bluesocket 1930 (3x3:3) Indoor Access Point
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Adtran Bluesocket BSAP-1930
Model Part Number	1700950F1
FCC ID	none specified
Type	enterprise access point
CPU1	Freescale (NXP) P1010E
CPU1 Type	Power ISA
CPU1 Speed	800 MHz
Flash1 Chip	Spansion FL256SAIFR0
Flash1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Size	256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip	Samsung K4B1G1646G-BCH9
ETH chip1	Atheros AR8033
ETH chip2	Atheros AR8035-A
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: 00:19:92 (4 E, 4 W) Ethernet OUI: 00:19:92 (4 E, 4 W)
Stock FW OS	Linux 2.6.35
Expansion IF types	Mini PCIe, USB 2.0
Mini PCIe slots	2
USB ports	1
USB Hub Compatible	Untested
PoE	802.3af, standard
Power	12 VDC, 2 A
Connector type	barrel
Serial Port (UART)	yes, RJ45 console, (115200 8N1)
JTAG Port	yes, 16-pin header, EJTAG 1.2
Other
Default IP address: 192.168.190.1 the IP 192.168.190.1 is used by 4 additional devices of which 4 are Adtran devices Default login user: adm1n Default login password: blue1socket adm1n:blue1socket credentials used by 5 additional devices of which 5 are Adtran devices
Manuf/OEM/ODM	Senao
Retail
ASIN	B00BQHFDSK
Country of manuf	Taiwan
Radio 1
Radio1 module	unknown
Radio1 module IF	Mini PCIe
Chip1	Atheros AR9590
Wireless interface OUI	00:19:92
Antenna Connector Type	U.FL
MIMO status	3x3:3
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Radio2 module	unknown
Radio2 module IF	Mini PCIe
Chip1	Atheros AR9590
Wireless interface OUI	00:19:92
Antenna Connector Type	U.FL
MIMO status	3x3:3
Wireless Standard	IEEE 802.11a/n
802.11n	up to 450 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.

For a list of all currently documented Adtran device with specifications, see Adtran.

• 450 Mbps - 3SS 5GHz 802.11n (40MHz chan.),

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = AN900 class

Overview

• Silkscreen on the PCB reads

JTAG-Serial Info

JTAG

16-pin header, EJTAG 1.2

Serial

Boot log

stock boot messages

U-Boot 2010.12-svn87344 (Nov 27 2012 - 10:39:41) CPU: P1010E, Version: 1.0, (0x80f90010) Core: E500, Version: 5.1, (0x80212151) Clock Configuration: CPU0:800 MHz, CCB:400 MHz, DDR:333.333 MHz (666.667 MT/s data rate) (Asynchronous), IFC:100 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: P1010RDB I2C: ready SPI: ready DRAM: 256 MiB (DDR3, 32-bit, CL=5, ECC off) L2: 256 KB enabled SF: Detected S25FL512S_256K with page size 256, total 64 MiB No valid address in Flash. Using generated address PCIe1: Root Complex of mini PCIe Slot, x1, regs @ 0xffe0a000 01:00.0 - 168c:003c - Network controller PCIe1: Bus 00 - 01 PCIe2: Root Complex of PCIe Slot, x1, regs @ 0xffe09000 03:00.0 - 168c:0033 - Network controller PCIe2: Bus 02 - 03 In: serial Out: serial Err: serial Net: eTSEC1, eTSEC2 Adtran bootloader version 1.0.5 SF: Detected S25FL512S_256K with page size 256, total 64 MiB SF: Detected S25FL512S_256K with page size 256, total 64 MiB Erasing SPI flash...Writing to SPI flash...done SF: Detected S25FL512S_256K with page size 256, total 64 MiB 65536 KiB S25FL512S_256K at 0:0 is now current device ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Kernel Image Created: 2018-06-11 20:56:22 UTC Image Type: PowerPC Linux Kernel Image (lzma compressed) Data Size: 1836021 Bytes = 1.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00c00000 Booting using the fdt blob at 0xc00000 Uncompressing Kernel Image ... OK Loading Device Tree to 00ffb000, end 00fffeb3 ... OK Using P1010 RDB machine description Memory CAM mapping: 256 Mb, residual: 0Mb Linux version 2.6.35 (root@jenkins24-hsv) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-55) ) #1 Mon Jun 11 20:56:09 UTC 2018 bootconsole [udbg0] enabled setup_arch: bootmem p1010_rdb_setup_arch() Found FSL PCI host bridge at 0x00000000ffe09000. Firmware bus number: 0->255 PCI host bridge /pcie@ffe09000 ranges: MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000 IO 0x00000000ffc10000..0x00000000ffc1ffff -> 0x0000000000000000 /pcie@ffe09000: PCICSRBAR @ 0xfff00000 Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->255 PCI host bridge /pcie@ffe0a000 ranges: MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000 IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000 /pcie@ffe0a000: PCICSRBAR @ 0xfff00000 P1010 RDB board from Freescale Semiconductor arch: exit Zone PFN ranges: DMA 0x00000000 -> 0x00010000 Normal empty HighMem empty Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00010000 MMU: Allocated 1088 bytes of context maps for 255 contexts --ALL LINES ABOVE THIS POINT ARE NOT 100% KNOWN DUE TO KERNEL BUFFER BEING SMALL-- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: root=31:06 rw rootfstype=jffs2 console=ttyS0,115200 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) High memory: 0k Memory: 254536k/262144k available (4892k kernel code, 7608k reserved, 244k data, 138k bss, 176k init) Kernel virtual memory layout: * 0xfffcf000..0xfffff000 : fixmap * 0xff800000..0xffc00000 : highmem PTEs * 0xff7d8000..0xff800000 : early ioremap * 0xd1000000..0xff7d8000 : vmalloc & ioremap SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:512 mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe40000, max 1 CPUs mpic: ISU size: 256, shift: 8, mask: ff mpic: Initializing for 256 sources time_init: decrementer frequency = 50.000000 MHz time_init: processor frequency = 799.999992 MHz clocksource: timebase mult[5000000] shift[22] registered clockevent: decrementer mult[ccccccc] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 xor: measuring software checksum speed 8regs : 981.000 MB/sec 8regs_prefetch: 845.000 MB/sec 32regs : 977.000 MB/sec 32regs_prefetch: 869.000 MB/sec xor: using function: 8regs (981.000 MB/sec) NET: Registered protocol family 16 e500 family performance monitor hardware support registered irq: irq 28 on host /soc@ffe00000/pic@40000 mapped to virtual irq 28 irq: irq 176 on host /soc@ffe00000/pic@40000 mapped to virtual irq 176 irq: irq 177 on host /soc@ffe00000/pic@40000 mapped to virtual irq 177 irq: irq 178 on host /soc@ffe00000/pic@40000 mapped to virtual irq 178 irq: irq 179 on host /soc@ffe00000/pic@40000 mapped to virtual irq 179 irq: irq 180 on host /soc@ffe00000/pic@40000 mapped to virtual irq 180 irq: irq 181 on host /soc@ffe00000/pic@40000 mapped to virtual irq 181 irq: irq 182 on host /soc@ffe00000/pic@40000 mapped to virtual irq 182 irq: irq 183 on host /soc@ffe00000/pic@40000 mapped to virtual irq 183 GPIO initing mpc8572 cfffe04c gpiochip_find_base: found new base at 224 irq: irq 47 on host /soc@ffe00000/pic@40000 mapped to virtual irq 47 LED: PCMUXCR2 0x40000000 LED: GPIO_DIR 0x88300000 LED: GPIO_DAT 0xfc000000 LED: initial 74LS164 0xf1 PCI: Probing PCI hardware pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01) pci 0000:00:00.0: supports D1 D2 pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xa001ffff 64bit] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: PME# supported from D0 D1 D3hot pci 0000:01:00.0: PME# disabled pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: bridge window [io 0x1000-0x0000] (disabled) pci 0000:00:00.0: bridge window [mem 0xa0000000-0xa00fffff] pci 0000:00:00.0: bridge window [mem 0x10000000-0x000fffff pref] (disabled) irq: irq 4 on host /soc@ffe00000/pic@40000 mapped to virtual irq 16 pci 0001:02:00.0: ignoring class b20 (doesn't match header type 01) pci 0001:02:00.0: supports D1 D2 pci 0001:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0001:02:00.0: PME# disabled pci 0001:03:00.0: reg 10: [mem 0x80000000-0x8001ffff 64bit] pci 0001:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0001:03:00.0: supports D1 pci 0001:03:00.0: PME# supported from D0 D1 D3hot pci 0001:03:00.0: PME# disabled pci 0001:02:00.0: PCI bridge to [bus 03-ff] pci 0001:02:00.0: bridge window [io 0x1000-0x0000] (disabled) pci 0001:02:00.0: bridge window [mem 0x80000000-0x800fffff] pci 0001:02:00.0: bridge window [mem 0x10000000-0x000fffff pref] (disabled) irq: irq 0 on host /soc@ffe00000/pic@40000 mapped to virtual irq 17 pci 0000:01:00.0: BAR 6: assigned [mem 0xa0020000-0xa002ffff pref] pci 0000:00:00.0: not setting up bridge for bus 0000:01 pci 0001:03:00.0: BAR 6: assigned [mem 0x80020000-0x8002ffff pref] pci 0001:02:00.0: not setting up bridge for bus 0001:03 pci_bus 0000:00: resource 0 [io 0xff7ec000-0xff7fbfff] pci_bus 0000:00: resource 1 [mem 0xa0000000-0xbfffffff] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa00fffff] pci_bus 0001:02: resource 0 [io 0xff7d9000-0xff7e8fff] pci_bus 0001:02: resource 1 [mem 0x80000000-0x9fffffff] pci_bus 0001:03: resource 1 [mem 0x80000000-0x800fffff] bio: create slab <bio-0> at 0 Freescale Elo / Elo Plus DMA driver cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource timebase NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 32 bytes, default 32 irq: irq 42 on host /soc@ffe00000/pic@40000 mapped to virtual irq 42 irq: irq 20 on host /soc@ffe00000/pic@40000 mapped to virtual irq 20 fsl-elo-dma ffe21300.dma: #0 (fsl,eloplus-dma-channel), irq 20 irq: irq 21 on host /soc@ffe00000/pic@40000 mapped to virtual irq 21 fsl-elo-dma ffe21300.dma: #1 (fsl,eloplus-dma-channel), irq 21 irq: irq 22 on host /soc@ffe00000/pic@40000 mapped to virtual irq 22 fsl-elo-dma ffe21300.dma: #2 (fsl,eloplus-dma-channel), irq 22 irq: irq 23 on host /soc@ffe00000/pic@40000 mapped to virtual irq 23 fsl-elo-dma ffe21300.dma: #3 (fsl,eloplus-dma-channel), irq 23 Setting up Freescale MSI support irq: irq 224 on host /soc@ffe00000/pic@40000 mapped to virtual irq 224 irq: irq 225 on host /soc@ffe00000/pic@40000 mapped to virtual irq 225 irq: irq 226 on host /soc@ffe00000/pic@40000 mapped to virtual irq 226 irq: irq 227 on host /soc@ffe00000/pic@40000 mapped to virtual irq 227 irq: irq 228 on host /soc@ffe00000/pic@40000 mapped to virtual irq 228 irq: irq 229 on host /soc@ffe00000/pic@40000 mapped to virtual irq 229 irq: irq 230 on host /soc@ffe00000/pic@40000 mapped to virtual irq 230 irq: irq 231 on host /soc@ffe00000/pic@40000 mapped to virtual irq 231 Slow work thread pool: Starting up Slow work thread pool: Ready JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 497 alg: No test for stdrng (krng) async_tx: api initialized (async) io scheduler noop registered io scheduler deadline registered (default) Null function/null data passed to tasklet Generic non-volatile memory driver v1.1 Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42) is a 16550A console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42) is a 16550A brd: module loaded loop: module loaded irq: irq 59 on host /soc@ffe00000/pic@40000 mapped to virtual irq 59 fsl-espi ffe07000.spi: at 0xd110e000 (irq = 59) registering panic_write to support mtdoops m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) Creating 15 MTD partitions on "spi32766.0": 0x000000000000-0x000000040000 : "Bootloader" 0x000000040000-0x000000050000 : "Bootloader environment" 0x000000050000-0x000000090000 : "Cert" 0x000000090000-0x000000200000 : "Kdump" mtdoops: Attached to MTD device 3 mtdoops: ready 0, 1 0x000000200000-0x000000300000 : "/var" 0x000000300000-0x000000580000 : "Kernel A" 0x000000580000-0x000001000000 : "Rootfs A" 0x000001000000-0x000001280000 : "Kernel B" 0x000001280000-0x000001d00000 : "Rootfs B" 0x000001d00000-0x000001e00000 : "/home" 0x000001e00000-0x000001f80000 : "/log" 0x000001f80000-0x000001f90000 : "DTB A" 0x000001f90000-0x000001fa0000 : "DTB B" 0x000001ff0000-0x000002000000 : "ART" 0x000001fe0000-0x000001ff0000 : "SENA0" Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. /proc/ptp_1588 created irq: irq 29 on host /soc@ffe00000/pic@40000 mapped to virtual irq 29 irq: irq 30 on host /soc@ffe00000/pic@40000 mapped to virtual irq 30 irq: irq 34 on host /soc@ffe00000/pic@40000 mapped to virtual irq 34 IEEE1588: ptp-timer devicepresent in the system IEEE1588: ptp-timer initialized eth0: Gianfar Ethernet Controller Version 1.4-skbr1.1.5, 00:19:92:xx:xx:xx eth0: Running with NAPI enabled eth0: RX BD ring size for Q[0]: 128 eth0: RX BD ring size for Q[1]: 128 eth0: RX BD ring size for Q[2]: 128 eth0: RX BD ring size for Q[3]: 128 eth0: RX BD ring size for Q[4]: 128 eth0: RX BD ring size for Q[5]: 128 eth0: RX BD ring size for Q[6]: 128 eth0: RX BD ring size for Q[7]: 128 eth0: TX BD ring size for Q[0]: 128 eth0: TX BD ring size for Q[1]: 128 eth0: TX BD ring size for Q[2]: 128 eth0: TX BD ring size for Q[3]: 128 eth0: TX BD ring size for Q[4]: 128 eth0: TX BD ring size for Q[5]: 128 eth0: TX BD ring size for Q[6]: 128 eth0: TX BD ring size for Q[7]: 128 Freescale PowerQUICC MII Bus: probed irq: irq 3 on host /soc@ffe00000/pic@40000 mapped to virtual irq 18 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> i2c /dev entries driver irq: irq 43 on host /soc@ffe00000/pic@40000 mapped to virtual irq 43 PowerPC Book-E Watchdog Timer Loaded irq: irq 58 on host /soc@ffe00000/pic@40000 mapped to virtual irq 58 irq: irq 45 on host /soc@ffe00000/pic@40000 mapped to virtual irq 45 caam ffe30000.crypto: device ID = 0x0a14010000000000 caam ffe30000.crypto: job queues = 4 alg: No test for authenc(hmac(sha1),cbc(aes)) (authenc-hmac-sha1-cbc-aes-caam) caam ffe30000.crypto: authenc-hmac-sha1-cbc-aes-caam alg: No test for authenc(hmac(sha256),cbc(aes)) (authenc-hmac-sha256-cbc-aes-caam) caam ffe30000.crypto: authenc-hmac-sha256-cbc-aes-caam alg: No test for authenc(hmac(sha1),cbc(des3_ede)) (authenc-hmac-sha1-cbc-des3_ede-caam) caam ffe30000.crypto: authenc-hmac-sha1-cbc-des3_ede-caam alg: No test for authenc(hmac(sha256),cbc(des3_ede)) (authenc-hmac-sha256-cbc-des3_ede-caam) caam ffe30000.crypto: authenc-hmac-sha256-cbc-des3_ede-caam alg: No test for authenc(hmac(sha1),cbc(des)) (authenc-hmac-sha1-cbc-des-caam) caam ffe30000.crypto: authenc-hmac-sha1-cbc-des-caam alg: No test for authenc(hmac(sha256),cbc(des)) (authenc-hmac-sha256-cbc-des-caam) caam ffe30000.crypto: authenc-hmac-sha256-cbc-des-caam NET: Registered protocol family 26 TCP cubic registered netfilter_table_index_init_early:init ok MAXLINES_OF_TABLE:8 NET: Registered protocol family 10 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. VFS: Mounted root (jffs2 filesystem) on device 31:6. Freeing unused kernel memory: 176k init JFFS2 notice: (1056) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. JFFS2 notice: (1058) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. JFFS2 notice: (1060) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. PowerPC Book-E Watchdog Timer Enabled (wdt_period=35) gc: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint init vbr, registering ioctl init vbr 2 etherip: Ethernet over IPv4 tunneling driver ****Address of trace_timer :d129a638 ath_hal: 0.9.17.1 (AR9380, DEBUG, REGOPS_FUNC, TX_DATA_SWAP, RX_DATA_SWAP, 11D) ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved ath_dfs: Version 2.0.0 Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved ath_pci: SmartAntenna-DRT-0.1 (Atheros/multi-bss) __ath_attach: Set global_scn[0] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** ACBKMinfree = 48 ACBEMinfree = 32 ACVIMinfree = 16 ACVOMinfree = 0 CABMinfree = 48 UAPSDMinfree = 0 ATH_TXBUF=512 __ioremap(): phys addr 0x0 is RAM lr d133c4ec ART Version : -48.10.30 SW Image Version : 6.550.584.1040.101 Board Revision : 7 ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125 Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Green-AP : Green-AP : Attached ath_get_caps[6845] rx chainmask mismatch actual 7 sc_chainmak 0 ath_get_caps[6820] tx chainmask mismatch actual 7 sc_chainmak 0 band steering initialized for direct attach hardware ieee80211_bsteering_attach: Band steering initialized ath_attach_dfs[13434] dfsdomain 1 request_irq type = 0x80 __ath_attach ** device wifi0 wifi0: Atheros 9580: mem=0xa0000000, irq=16 hw_base=0xd1700000 __ath_attach: Set global_scn[1] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead *** ACBKMinfree = 48 ACBEMinfree = 32 ACVIMinfree = 16 ACVOMinfree = 0 CABMinfree = 48 UAPSDMinfree = 0 ATH_TXBUF=512 __ioremap(): phys addr 0x0 is RAM lr d133c4ec ART Version : -48.10.30 SW Image Version : 6.550.584.1040.101 Board Revision : 0 ar9300_attach: nf_2_nom -110 nf_2_max -60 nf_2_min -125 Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Rate cntrl mode not loaded returning Green-AP : Green-AP : Attached ath_get_caps[6845] rx chainmask mismatch actual 7 sc_chainmak 0 ath_get_caps[6820] tx chainmask mismatch actual 7 sc_chainmak 0 band steering initialized for direct attach hardware ieee80211_bsteering_attach: Band steering initialized ath_attach_dfs[13434] dfsdomain 1 request_irq type = 0x80 __ath_attach ** device wifi1 wifi1: Atheros 9580: mem=0x80000000, irq=17 hw_base=0xd1740000 module chardrv being loaded. nf_conntrack version 0.5.0 (3979 buckets, 15916 max) GRE over IPv4 tunneling driver 1588 is running at system-clock frequency (199999998) ADDRCONF(NETDEV_UP): eth0: link is not ready ip_tables: (C) 2000-2006 Netfilter Core Team PHY: mdio@ffe24000:01 - Link is Up - 1000/Full ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Boot log

OpenWrt boot messages WIP