AirTies WAV-281
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| wireless router | |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | AirTies WAV-281 |
| FCC ID | none specified |
| Type | wireless router |
| CPU1 | Infineon (Lantiq) PSB 50712 |
| CPU1 Type | MIPS 24Kec |
| CPU1 Speed | 333 MHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Infineon (Lantiq) PSB 50712 |
| Switch | Infineon ADM6996I |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Serial Port (UART) | yes, (115200 8N1) |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
| Retail | |
| Availability | End of Life |
| Radio 1 | |
| Chip1 | Ralink RT2561T |
| Chip2 | Ralink RT2527L |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented AirTies devices with specifications, see AirTies.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
OpenWrt Target: lantiq
OpenWrt Subtarget: xway_legacy
OpenWrt Package architecture: mips_24kc
Support started version: external image
Current supported version: EOL
Last Supported Version: external image
OpenWrt Subtarget: xway_legacy
OpenWrt Package architecture: mips_24kc
Support started version: external image
Current supported version: EOL
Last Supported Version: external image
WLAN Comment: 2 non-detachable antennas
Comment:
As there is no specific image for this device, it is unclear which OpenWrt image to take, see devicepage
Comment:
As there is no specific image for this device, it is unclear which OpenWrt image to take, see devicepage
Please insert instructions here
Categories:
- AirTies
- Embedded system/wireless router
- Embedded System Infineon (Lantiq)
- Embedded System PSB 50712
- Infineon (Lantiq)
- Embedded System MIPS 24Kec
- Embedded System
- Embedded System Infineon
- Embedded System ADM6996I
- Infineon
- OpenWrt Was Supported
- Embedded System Ralink
- Embedded System RT2561T
- Ralink
- Embedded System RT2527L
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation