Alcatel-Sbell RG100A-AA Rev 0
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |
|---|---|
| Shanghai Bell Alcatel RG100A ADSL Modem | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Status Unknown |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Alcatel RG100A-AA-Sbell Rev 0 |
| FCC ID |
none specified |
| Type |
dsl modem, wireless router |
| CPU1 |
Broadcom BCM6358 |
| CPU1 Type |
BMIPS4350 |
| CPU1 Speed |
300 MHz ( 2 cores ) |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Broadcom BCM6358 |
| Switch |
Broadcom BCM5325E |
| Ethernet Port Count |
4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
CFE |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 2 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, (115200 8N1) |
|
Flags: ADSL2+ | |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| Radio 1 | |
| Chip1 |
Broadcom BCM4318 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| Wireless Standard |
IEEE 802.11b/g |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 or 5 GHz |
| Radio cor_rev |
9 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | DSL will not work at all on devices with BCM63xx DSL chipset (due to unavailability of FLOSS driver for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom DSL, Unsupported: DSL modem and Broadcom BCM63xx for details. |
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: bcm63xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_mips32
Support started version: 10.03
Current supported version: 22.03.7
Unsupported Functions:
DSL modem
On the OpenWrt Wiki
OpenWrt Target: bcm63xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_mips32
Support started version: 10.03
Current supported version: 22.03.7
Unsupported Functions:
DSL modem
Please insert instructions here
Categories:
- Alcatel
- Embedded system/dsl modem
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM6358
- Broadcom
- Embedded System BMIPS4350
- Embedded System
- Embedded System BCM5325E
- OpenWrt Was Supported
- Embedded System BCM4318
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
