Alice IAD WLAN 4421
bgn (N150) | |
---|---|
wireless router,dsl modem | |
WikiDevi.wi-cat.ru | Alice IAD WLAN 4421 |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Alice WLAN 4421 (IAD) |
FCC ID | none specified |
Board ID | 141750620000J |
Type | wireless router, dsl modem |
CPU1 ![]() | Lantiq PSB 50702 |
CPU1 Type | MIPS 24Kec |
CPU1 Speed | 333 MHz ( 2 cores ) |
Flash1 Chip | Macronix MX29LV640EBTI-70G |
Flash1 Size | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip | Zentel A3S12D40ETP-G6 |
ETH chip1 | Lantiq PSB 50702 |
Switch | Realtek RTL8306G |
Ethernet Port Count | 4-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
Stock bootloader | brnboot |
Expansion IF types | none specified |
Power | 12 VDC, 1 A |
Connector type | barrel |
Serial Port (UART) | yes, 4-pin header, 115200 / 8N1 |
Flags: | |
Additional chips | |
Other | |
Default SSID: ALICE-WLANXX | |
Manuf/OEM/ODM | Arcadyan ARV7506PW11 |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
Radio 1 | |
Chip1 | Ralink RT3060F |
Wireless interface OUI | 00:1C:28 |
Antenna Connector Type | none specified |
MIMO status | 1x1:1 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 150 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"P/N: 141750620000J R01" is silkscreened on the board.
- OEM: Arcadyan ARV7506PW11
Per the manual, the default SSID appears to be ALICE-WLANXX where XX is some number (appears to be non-hex). The OUI used may be (or include) 00:1C:28.
Links of Interest
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt Wiki
OpenWrt Target: lantiq
OpenWrt Subtarget: xway
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: 24.10.2
Comment:
aka Alice IAD 4421 / o2 Box 4421
Please insert instructions here
- Alice
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Lantiq
- Embedded System PSB 50702
- Lantiq
- Embedded System MIPS 24Kec
- Embedded System
- Embedded System Realtek
- Embedded System RTL8306G
- Realtek
- Manuf Arcadyan
- OpenWrt Supported
- Embedded System Ralink
- Embedded System RT3060F
- Ralink
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation