We'll be deploying 1.43 to ShoutWiki sites this weekend. Staff will be working all weekend to deal with any unforeseen bugs that crop up.
CreateWiki will not be available immediately after the upgrade; however, we expect the rewrite to be completed during this release cycle.
Allnet ALL0333CJ
From TechInfoDepot
Jump to navigationJump to search
| dsl modem | |
| WikiDevi.wi-cat.ru | Allnet ALL0333CJ |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Allnet ALL0333CJ (rev.C) |
| Type | dsl modem |
| CPU1 | Lantiq (Intel) PSB 50601 |
| CPU1 Type | MIPS 4KEc |
| CPU1 Speed | 266 MHz |
| Flash1 Chip | Spansion S29GL032N90TF104 |
| Flash1 Size | 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip | Zentel A3V28S40JTP-60 |
| ETH chip1 | Lantiq (Intel) PSB 50601 |
| DSL Ports | 1 |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
| |
| Stock bootloader | U-Boot 1.1.5 |
| Stock FW OS | Linux 2.4.31 |
| Expansion IF types | none specified |
| Power | 12 VDC, 0.4 A |
| Connector type | barrel |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
| Retail | |
| Availability | End of Life |
| EAN |
4038816003348 (UPC DB, On eBay) |
| Country of manuf | China |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Allnet devices with specifications, see Allnet.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
Support started version: unknown
Current supported version: unknown
Current supported version: unknown
Please insert instructions here
JTAG-Serial Info
Serial
Bootlog
| bootlog • >> |
|---|
U-Boot 1.1.5-2.0 (Jan 24 2013 - 13:38:46) relocate_code start relocate_code finish. type is 00000001 type is 0000007e addr[0] = 227e /n Detect flash id is bb Flash: 4 MB In: serial Out: serial Err: serial Net: Internal Clock Selected EPHY_MODE AMAZON_SE Switch Hit any key to stop autoboot: 4 3 2 1 0 Checking Images Integrity ... Kernel: OK Rootfs: OK ## Booting image at b03744d0 ... Image Name: MIPS Linux-2.4.31-Amazon_SE-3.6. Created: 2013-01-24 5:38:19 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 552170 Bytes = 539.2 kB Load Address: 80002000 Entry Point: 8019a040 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... MC_PRIO = 0x0 -> 0xc0 flash_start=0xb0000000 flash_size=4194304l CPU revision is: 0001906c Primary instruction cache 8kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 8kB, 2-way, linesize 16 bytes. Linux version 2.4.31-Amazon_SE-3.6.12-R0208V36 (uday@rdfwdev1.aztech.com) (gcc version 3.3.6) #107 Thu Jan 24 13:38:12 SGT 2013 Can't analyze prologue code at 8001e2a0 Determined physical RAM map: User-defined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock1 ip=192.168.1.1:192.168.1.2::::eth0:on console=ttyS0,115200 ethaddr=00:0F:C9:12:9A:EE mem=16M panic=1 ethaddr_setup: mac address 0- f-c9-12-9a-ee mips_hpt_frequency:133333333 r4k_offset: 00145855(1333333) Using 133.333 MHz high precision timer. [ifx_asc_init_hardware 1081]: ASC ID = 0x101044c4 [ifx_asc_init_hardware 1083]: TxFIFO size = 16, RxFIFO size = 16 [ifx_asc_init_hardware 1085]: TxFIFO CON = 0x1f01, RxFIFO CON = 0x1f01 Calibrating delay loop... 266.24 BogoMIPS MIPS CPU counter frequency is fixed at 133333333 Hz Memory: 14268k/16384k available (1619k kernel code, 2116k reserved, 100k data, 80k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket amazon_se_dma_init dma_chip_init LSP Revision 1 Starting kswapd Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher pty: 256 Unix98 ptys configured ttyS0 at MEM 0xbe100c00 (irq = 66) is a IFX_ASC Amazon_SE MEI version:2.04.00 cgu: misc_register on minor = 63 amazon_se_gptu_init:<6>gptu: totally 6 16-bit timers/counters gptu: misc_register on minor 62 gptu: succeeded to request irq 25 gptu: succeeded to request irq 26 gptu: succeeded to request irq 27 gptu: succeeded to request irq 28 gptu: succeeded to request irq 29 gptu: succeeded to request irq 30 cgu_get_fpi_bus_clock(2) = 133333333, clock_divider = 1 bus clock = 5000000, clock_divider = 1 divider = 33333332 set_timer(0, 4000), divider = 33333332 request_timer(0, 0x0000010D, 33333332) reload value = 33333332 led: misc_register on minor = 151 Infineon CPE API Driver version: DSL CPE API V3.16.5 PPP generic driver version 2.4.2 amazon_se ETOP driver loaded! Internal Clock Selected EPHY_MODE oamk: init_module() called. Opening oam kernel socket oamk: init_module() returned. ppe: ATM init succeeded (firmware version 1.1.0.2.1.13) [init_amazon_se_mtd 371]: AMAZON_SE_EBU_CON 0x40000060, AMAZON_SE_EBU_CON0 0x1d2aa init_amazon_se_mtd: start_scan_addr: b0000000 init_amazon_se_mtd: chip probing count 0 Amazon_se: probing address:b0000000 Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. init_amazon_se_mtd: bank1, name:Amazon_se Bank 0, size:4194304bytes AMAZON_SE flash0: Using static image partition definition Creating 2 MTD partitions on "Amazon_se Bank 0": 0x00000000-0x00010000 : "U-Boot" 0x00010000-0x00400000 : "RootFS,Kernel,Data,Environment" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) GRE over IPv4 tunneling driver Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (128 buckets, 1024 max) - 360 bytes per conntrack ip_conntrack_pptp version 1.9 loaded ip_conntrack_rtsp v0.01 loading ip_nat_pptp version 1.5 loaded ip_nat_rtsp v0.01 loading ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Amazon_Se Port Initialization VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 80k freed init started: BusyBox v1.00 (2013.01.24-05:25+0000) multi-call binary init started: BusyBox v1.00 (2013.01.24-05:25+0000) multi-call binary Starting pid 11, console /dev/console: '/etc/init.d/rcS' Algorithmics/MIPS FPU Emulator v1.5 Created character device /dev/amazon_se-port with major[254] and minor[0] Created character device /dev/dsl_cpe_api with major[107] and minor[0] Created character device /dev/ifx_mei with major[105] and minor[0] :::: Breaking from 1st while loop 10_00_10_00_00_04_01_00 DSL_CPE: Using ADSL Modem is not ready!autostart script file - /etc/cmv_batch DSL_CPE: using script notification file - /etc/rc.d/init.d/xdslrc.sh DSL_CPE: using 1st firmware file - /firmware/modemhwe.bin DSL_CPE: Device /dev/dsl_cpe_api opened successfully Using /lib/modules/2.4.31-Amazon_SE-3.6.12-R0208V36/kernel/net/ifx_nfext/ifx_nfext_core.o Using /lib/modules/2.4.31-Amazon_SE-3.6.12-R0208V36/kernel/net/ifx_nfext/ifx_nfext_ppp.o Bringing up syslog iptables: Chain already exists iptables: Chain already exists DSL_CPE: Parsing script file (/etc/cmv_batch)... DSL_CPE: Parsing script file (/etc/cmv_batch)... DSL_CPE: read info 103 1, value=1008, retCode=0 DSL_CPE: read optn 25 0, value=0201, retCode=0 Try `iptables -h' or 'iptables --help' for more information. <6>device eth0 entered promiscuous mode br0: port 1(eth0) entering learning state br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating DAS 855 [src/IFIN_MgmtServer.c:StartTimer:183] Started Periodic Inform Timer-> ID = 1 IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.Instances Num=1 ifx_ds_get_exact_name : Node not found tree_add_instance 423 : clash in instance found : exiting ifx_ds_add_object 888 : failure in adding instance IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.IncludeXMLVerString Num=1 IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.IncludeSOAPAction Num=1 IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.DeviceInfo.Manufacturer Num=4 /tmp/version File does not exit Enable successfull Enable successfull Kernel:2.4.31-Amazon_SE-3.6.12-R0208V36 Enable successfull Enable successfull Enable successfull Enable successfull nReturn=0 writing 0x80000010 into address 0x1e104114 +---------------------------------------------------+ | Linux/MIPS on AMAZON_SE by Infineon COM AC BB_CPE | +---------------------------------------------------+ Starting pid 1071, console /dev/console: '/sbin/getty' Bringup wan started for wan index 1 !! BOOTLoader:1.1.5-2.0 CPU:AMAZON_SE-v1.2 BSP:1.3.1.1-patch2 Firmware:FW Version: 3.4.6.8.1.2 Software:Amazon_SE-3.6.12-R0208V36-1338-24Jan13 Tool Chain:lxdb-1-3-2/3.3.6/0.9.28 IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.ACSGetRPC Num=4 iReason = 3, state = 0, RetryCnt = 0 Blocking on Select()... mac clone 0 pppoe_mac_addr Amazon_SE login: ::::: Wan mac addr 1 00:0F:C9:12:9A:EF open ATM itf = 0, vpi = 1, vci = 32, ret = 0 Amazon_SE login: rCreated interface nas0 <---> WAN1 !! odevice nas0 entered promiscuous mode br0: port 2(nas0) entering learning state ot Password: Warning: Using /etc/hosts will be removed in a future version. Please use only the /etc/dnrd/master file or use -m off. br0: port 2(nas0) entering forwarding state br0: topology change detected, propagating BusyBox v1.00 (2013.01.24-05:25+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. |