Allnet ALL0333CJ/Serial info

Bootlog

bootlog

U-Boot 1.1.5-2.0 (Jan 24 2013 - 13:38:46) relocate_code start relocate_code finish. type is 00000001 type is 0000007e addr[0] = 227e /n Detect flash id is bb Flash: 4 MB In: serial Out: serial Err: serial Net: Internal Clock Selected EPHY_MODE AMAZON_SE Switch Hit any key to stop autoboot: 4 3 2 1 0 Checking Images Integrity ... Kernel: OK Rootfs: OK ## Booting image at b03744d0 ... Image Name: MIPS Linux-2.4.31-Amazon_SE-3.6. Created: 2013-01-24 5:38:19 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 552170 Bytes = 539.2 kB Load Address: 80002000 Entry Point: 8019a040 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... MC_PRIO = 0x0 -> 0xc0 flash_start=0xb0000000 flash_size=4194304l CPU revision is: 0001906c Primary instruction cache 8kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 8kB, 2-way, linesize 16 bytes. Linux version 2.4.31-Amazon_SE-3.6.12-R0208V36 (uday@rdfwdev1.aztech.com) (gcc version 3.3.6) #107 Thu Jan 24 13:38:12 SGT 2013 Can't analyze prologue code at 8001e2a0 Determined physical RAM map: User-defined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock1 ip=192.168.1.1:192.168.1.2::::eth0:on console=ttyS0,115200 ethaddr=00:0F:C9:12:9A:EE mem=16M panic=1 ethaddr_setup: mac address 0- f-c9-12-9a-ee mips_hpt_frequency:133333333 r4k_offset: 00145855(1333333) Using 133.333 MHz high precision timer. [ifx_asc_init_hardware 1081]: ASC ID = 0x101044c4 [ifx_asc_init_hardware 1083]: TxFIFO size = 16, RxFIFO size = 16 [ifx_asc_init_hardware 1085]: TxFIFO CON = 0x1f01, RxFIFO CON = 0x1f01 Calibrating delay loop... 266.24 BogoMIPS MIPS CPU counter frequency is fixed at 133333333 Hz Memory: 14268k/16384k available (1619k kernel code, 2116k reserved, 100k data, 80k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket amazon_se_dma_init dma_chip_init LSP Revision 1 Starting kswapd Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher pty: 256 Unix98 ptys configured ttyS0 at MEM 0xbe100c00 (irq = 66) is a IFX_ASC Amazon_SE MEI version:2.04.00 cgu: misc_register on minor = 63 amazon_se_gptu_init:<6>gptu: totally 6 16-bit timers/counters gptu: misc_register on minor 62 gptu: succeeded to request irq 25 gptu: succeeded to request irq 26 gptu: succeeded to request irq 27 gptu: succeeded to request irq 28 gptu: succeeded to request irq 29 gptu: succeeded to request irq 30 cgu_get_fpi_bus_clock(2) = 133333333, clock_divider = 1 bus clock = 5000000, clock_divider = 1 divider = 33333332 set_timer(0, 4000), divider = 33333332 request_timer(0, 0x0000010D, 33333332) reload value = 33333332 led: misc_register on minor = 151 Infineon CPE API Driver version: DSL CPE API V3.16.5 PPP generic driver version 2.4.2 amazon_se ETOP driver loaded! Internal Clock Selected EPHY_MODE oamk: init_module() called. Opening oam kernel socket oamk: init_module() returned. ppe: ATM init succeeded (firmware version 1.1.0.2.1.13) [init_amazon_se_mtd 371]: AMAZON_SE_EBU_CON 0x40000060, AMAZON_SE_EBU_CON0 0x1d2aa init_amazon_se_mtd: start_scan_addr: b0000000 init_amazon_se_mtd: chip probing count 0 Amazon_se: probing address:b0000000 Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. init_amazon_se_mtd: bank1, name:Amazon_se Bank 0, size:4194304bytes AMAZON_SE flash0: Using static image partition definition Creating 2 MTD partitions on "Amazon_se Bank 0": 0x00000000-0x00010000 : "U-Boot" 0x00010000-0x00400000 : "RootFS,Kernel,Data,Environment" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) GRE over IPv4 tunneling driver Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (128 buckets, 1024 max) - 360 bytes per conntrack ip_conntrack_pptp version 1.9 loaded ip_conntrack_rtsp v0.01 loading ip_nat_pptp version 1.5 loaded ip_nat_rtsp v0.01 loading ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Amazon_Se Port Initialization VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 80k freed init started: BusyBox v1.00 (2013.01.24-05:25+0000) multi-call binary init started: BusyBox v1.00 (2013.01.24-05:25+0000) multi-call binary Starting pid 11, console /dev/console: '/etc/init.d/rcS' Algorithmics/MIPS FPU Emulator v1.5 Created character device /dev/amazon_se-port with major[254] and minor[0] Created character device /dev/dsl_cpe_api with major[107] and minor[0] Created character device /dev/ifx_mei with major[105] and minor[0] :::: Breaking from 1st while loop 10_00_10_00_00_04_01_00 DSL_CPE: Using ADSL Modem is not ready!autostart script file - /etc/cmv_batch DSL_CPE: using script notification file - /etc/rc.d/init.d/xdslrc.sh DSL_CPE: using 1st firmware file - /firmware/modemhwe.bin DSL_CPE: Device /dev/dsl_cpe_api opened successfully Using /lib/modules/2.4.31-Amazon_SE-3.6.12-R0208V36/kernel/net/ifx_nfext/ifx_nfext_core.o Using /lib/modules/2.4.31-Amazon_SE-3.6.12-R0208V36/kernel/net/ifx_nfext/ifx_nfext_ppp.o Bringing up syslog iptables: Chain already exists iptables: Chain already exists DSL_CPE: Parsing script file (/etc/cmv_batch)... DSL_CPE: Parsing script file (/etc/cmv_batch)... DSL_CPE: read info 103 1, value=1008, retCode=0 DSL_CPE: read optn 25 0, value=0201, retCode=0 Try `iptables -h' or 'iptables --help' for more information. <6>device eth0 entered promiscuous mode br0: port 1(eth0) entering learning state br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating DAS 855 [src/IFIN_MgmtServer.c:StartTimer:183] Started Periodic Inform Timer-> ID = 1 IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.Instances Num=1 ifx_ds_get_exact_name : Node not found tree_add_instance 423 : clash in instance found : exiting ifx_ds_add_object 888 : failure in adding instance IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.IncludeXMLVerString Num=1 IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.IncludeSOAPAction Num=1 IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.DeviceInfo.Manufacturer Num=4 /tmp/version File does not exit Enable successfull Enable successfull Kernel:2.4.31-Amazon_SE-3.6.12-R0208V36 Enable successfull Enable successfull Enable successfull Enable successfull nReturn=0 writing 0x80000010 into address 0x1e104114 +---------------------------------------------------+ | Linux/MIPS on AMAZON_SE by Infineon COM AC BB_CPE | +---------------------------------------------------+ Starting pid 1071, console /dev/console: '/sbin/getty' Bringup wan started for wan index 1 !! BOOTLoader:1.1.5-2.0 CPU:AMAZON_SE-v1.2 BSP:1.3.1.1-patch2 Firmware:FW Version: 3.4.6.8.1.2 Software:Amazon_SE-3.6.12-R0208V36-1338-24Jan13 Tool Chain:lxdb-1-3-2/3.3.6/0.9.28 IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.ACSGetRPC Num=4 iReason = 3, state = 0, RetryCnt = 0 Blocking on Select()... mac clone 0 pppoe_mac_addr Amazon_SE login: ::::: Wan mac addr 1 00:0F:C9:12:9A:EF open ATM itf = 0, vpi = 1, vci = 32, ret = 0 Amazon_SE login: rCreated interface nas0 <---> WAN1 !! odevice nas0 entered promiscuous mode br0: port 2(nas0) entering learning state ot Password: Warning: Using /etc/hosts will be removed in a future version. Please use only the /etc/dnrd/master file or use -m off. br0: port 2(nas0) entering forwarding state br0: topology change detected, propagating BusyBox v1.00 (2013.01.24-05:25+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands.