Amped Wireless AP600EX

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
High Power Wireless-N 600mW Pro Access Point
Amped Wireless AP600EX 01.jpg
Homepage Product page
Support Support page
WikiDevi.wi-cat.ru Amped Wireless AP600EX
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Amped Wireless AP600EX
FCC ID ZTT-AP600EX
Type access point
CPU1 checkY Realtek RTL8196C
CPU1 Type Lexra RLX4181
CPU1 Speed 390 MHz
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Realtek RTL8196C
Ethernet Port Count 1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types none specified
Power 12 VDC, 1 A

Flags:
hg directional

Other

Default SSID: Amped_Pro_AP
Default IP address: 192.168.1.240
the IP 192.168.1.240 is used by 21 additional devices
of which 11 are Amped Wireless devices

Manuf/OEM/ODM Loopcomm
Retail
FCC approval date 06 January 2012
UPC 850214003140
(UPC DB, On eBay)
ASIN B005K8ATTE Flag of the United States.svg
Radio 1
Chip1 Realtek Model?
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 1x1:1
Wireless Standard IEEE 802.11b/g/n
802.11n up to 150 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Amped Wireless devices with specifications, see Amped Wireless.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

This is a Loopcomm device, the device uses the same hardware as the Amped Wireless SR600EX

"LPC0033 REV:2.2" is silkscreened on the board in the FCC photos.

Per the manual, the default SSID is Amped_Pro_AP. The default WPA key is wireless. OUI may be or include F8:7B:8C.

Links of Interest

(Setup Guide, Users Guide, Datasheet)

Pictures

Retail Images