Amped Wireless R20000G

abgn (AN600)
High Power Wireless-N 600mW Gigabit Dual Band Router
Homepage	Product page
WikiDevi.wi-cat.ru	Amped Wireless R20000G
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Amped Wireless R20000G
FCC ID	ZTT-R20000G
IC ID	10233A-R20000G
Type	wireless router
CPU1 Y	Realtek RTL8198
CPU1 Type	Lexra RLX5281
CPU1 Speed	620 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Realtek RTL8198
Switch	Realtek RTL8198
Ethernet Port Count	1-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1 A
Connector type	barrel
Other
Default SSID: Amped_2.4GHz , Amped_5.0GHz Default IP address: 192.168.3.1 the IP 192.168.3.1 is used by 32 additional devices of which 17 are Amped Wireless devices Default login user: admin Default login password: admin admin:admin credentials used by 1358 additional devices of which 7 are Amped Wireless devices
Manuf/OEM/ODM	Loopcomm
Retail
FCC approval date	31 July 2012
(Est.) release date	14 May 2012
UPC	850214003195 (UPC DB, On eBay)
ASIN	B007M8SGW2
Country of manuf	Taiwan
Radio 1
Chip1	Realtek RTL8192CE
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Realtek RTL8192DR
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Amped Wireless devices with specifications, see Amped Wireless.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = AN600 class

Overview

The device uses 2x Skyworks (SiGe) SE5004L / 5004L power amplifiers for the 5GHz radio and 2x Skyworks (SiGe) SE2576L / 2576L power amplifiers for the 2.4GHz radio.

This device likely has 8 MB Flash and 64 MB of RAM (like the Amped Wireless AP20000G).

Per the manual, the default SSIDs are Amped_2.4GHz and Amped_5.0GHz. The default WPA PSK is wireless.

Probable F8:7B:8C OUIs

Links of Interest

• Amped Wireless Adds Simultaneous Dual-Band Router - SmallNetBuilder