Arcadyan/Astoria VGV7510KW22 o2 Box 6431
From TechInfoDepot
< Arcadyan
| bgn (N300) | |
|---|---|
| N300 DSL Modem | |
 | |
| 3rd Party Firmware | |
| dd-wrt | Expression error: Unexpected = operator. |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Expression error: Unexpected = operator. |
| Platform | |
| Brand • Model • Rev | Arcadyan/Astoria VGV7510KW22 o2 Box 6431 |
| FCC ID | none specified |
| Type | dsl modem, wireless router |
CPU1  | Lantiq (Intel) PSB 80920 |
| CPU1 Type | MIPS 34Kc |
| CPU1 Speed | 500 MHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Lantiq (Intel) PSB 80920 |
| Switch | Lantiq GSWIP |
| RJ11 Ports (VOIP/POTS) | 3 |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader | brnboot |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 15 VDC, 1.2 A |
| Serial Port (UART) | yes, (115200 8N1) |
| JTAG Port | no |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | Ralink RT3062F |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: lantiq
Subtarget: xrx200
Package architecture: mips_24kc
Supported Since Commit
Support started version: 15.05
Current supported version: 24.10.4
Subtarget: xrx200
Package architecture: mips_24kc
Supported Since Commit
Support started version: 15.05
Current supported version: 24.10.4
LAN Hardware: Lantiq GSWIP (built-in SoC switch)
WLAN Hardware: Ralink RT3062F
Installation method(s):
see devicepage
Install Comment:
23.05 factory image not available, use 21.02 factory image instead for first installation.
WLAN Hardware: Ralink RT3062F
Installation method(s):
see devicepage
Install Comment:
23.05 factory image not available, use 21.02 factory image instead for first installation.
Please insert instructions here
Categories:
- Arcadyan/Astoria
- Embedded system/dsl modem
- Embedded system/wireless router
- Embedded System Lantiq (Intel)
- Embedded System PSB 80920
- Lantiq (Intel)
- Embedded System MIPS 34Kc
- Embedded System
- Embedded System Lantiq
- Embedded System GSWIP
- Lantiq
- OpenWrt Supported
- Embedded System Ralink
- Embedded System RT3062F
- Ralink
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation
