Arcadyan VRV9510KWAC23

abgn+ac (AC1600)
Router Livebox Next
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Partial Support
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Arcadyan VRV9510KWAC23
FCC ID	none specified
Type	wireless router
CPU1 Y	Lantiq (Intel) PSB 80920
CPU1 Type	MIPS 34Kc
CPU1 Speed	500 MHz ( 2 cores )
Flash1 Chip	Brand? Model?
Flash1 Size	128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size	256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR2)
RAM1 Chip	Brand? Model?
ETH chip1	Lantiq (Intel) PSB 80920
Switch	Lantiq (Intel) PSB 80920
RJ11 Ports (VOIP/POTS)	2
Ethernet Port Count	1-1GbE-WAN 5-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	brnboot
Expansion IF types	USB 2.0
USB ports	2
USB Hub Compatible	Untested
Power	12 VDC, 2.5 A
Serial Port (UART)	yes, 3.3V TTL, (115200 8N1)
JTAG Port	no
Flags: VDSL/ADSL2+
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
Availability	End of Life
Radio 1
Chip1	Broadcom BCM43222
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	Broadcom BCM4360
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	3x3:3
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 1300 Mbps
802.11n	up to 450 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio cor_rev	40

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.

For a list of all currently documented Arcadyan devices with specifications, see Arcadyan.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),

• 1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.) = AC1600 class

Overview

Specs

• SoC: Lantiq VRX200
• CPU: 2x MIPS 34Kc 500 MHz
• RAM: 256 MiB DDR2
• Flash: 128 MiB NAND
• Ethernet: Built-in Gigabit Ethernet switch, 5x 1GbE
• Wifi 2.4GHz: Broadcom BCM43222KFBG 802.11b/g/b MIMO 2T2R
• Wifi 5GHz: Broadcom BCM4360KMLG 802.11ac MIMO 3T3R
• USB: 2x USB 2.0
• DSL: Built-in VDSL/ADSL2+ XWAY VRX208
• LEDs: 8x
• Buttons: 4x
• Phone: Lantiq PEF 42068 V XWAY SLIC120

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum

Target: lantiq
Subtarget: xrx200
Package architecture: mips_24kc
Supported Since Commit
Support started version: 24.10.0
Current supported version: 24.10.4

Unsupported Functions:
WiFi 5GHz
LAN Hardware: Lantiq GSWIP (built-in SoC switch)
WLAN Hardware: Broadcom BCM43222; Broadcom BCM4360
Installation method(s):
see devicepage
Recovery method(s):
see devicepage

git • >>

lantiq: add support for Arcadyan VRV9510KWAC23 The Arcadyan VRV9510KWAC23 (trade name Livebox Next) is a Lantiq router distributed by some spanish ISPs Hardware: - SoC: Lantiq VRX200 - CPU: 2x MIPS 34Kc 500 MHz - RAM: 256 MiB DDR2 - Flash: 128 MiB NAND - Ethernet: Built-in Gigabit Ethernet switch, 5x 1GbE - Wifi 2.4GHz: Broadcom BCM43222KFBG 802.11b/g/b MIMO 2T2R - Wifi 5GHz: Broadcom BCM4360KMLG 802.11ac MIMO 3T3R - USB: 2x USB 2.0 - DSL: Built-in VDSL/ADSL2+ XWAY VRX208 - LEDs: 8x - Buttons: 4x - Phone: Lantiq PEF 42068 V XWAY SLIC120 Install instructions: Detailed instructions can be found on the wiki https://openwrt.org/toh/arcadyan/vrv9510kwac23 1. Boot into UART mode and upload the the https://raw.githubusercontent.com/danielhuici/arcadyan-vrv9510kwac23-utils/main/u-boot.asc file via serial console to boot into U-Boot. 2. Perform a backup of the NAND 3. Setup a TFTP server and serve the https://github.com/danielhuici/arcadyan-vrv9510kwac23-utils/raw/main/u-boot.ltq.lzo.nandspl. Replace the OEM bootloader with this one. Erase your NAND and write the image into it 4. Reboot the router 5. Serve the OpenWrt ramdisk image on your TFTP server and boot it via U-Boot 6. When OpenWrt boots, flash the SquashFS OpenWrt image using LuCi interface, so OpenWrt gets installed into the NAND Signed-off-by: Daniel Huici