Aruba Networks AP-115 (APIN0115)
From TechInfoDepot
Jump to navigationJump to search
| abgn (AN900) | |||||
|---|---|---|---|---|---|
| AP-110 Series Wireless Access Point | |||||
|
| |||||
| WikiDevi.wi-cat.ru | Aruba Networks AP-115 (APIN0115) | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Supported | ||||
| Tomato any flavor | Incompatible | ||||
| Gargoyle | Status Unknown | ||||
| Platform | |||||
| Brand • Model • Rev | Aruba Networks AP-115(APIN0115) | ||||
| FCC ID | Q9DAPIN0114115 | ||||
| IC ID | 4675A-APIN0114115 | ||||
| Board ID | AJX00C-1.6 | ||||
| Type | access point | ||||
| Series | AP-110 | ||||
| CPU1 | Qualcomm Atheros QCA9558 | ||||
| CPU1 Type | MIPS 74Kc | ||||
| CPU1 Speed | 720 MHz | ||||
| Flash1 Chip | Macronix MX25L12805D x 2 | ||||
| Flash1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR) | ||||
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR2) | ||||
| RAM1 Chip | Brand? Model? x 2 | ||||
| ETH chip1 | Qualcomm Atheros QCA9558 | ||||
| Ethernet Port Count | 1-1GbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||
|
802dot11 OUI: none specified | |||||
| Stock bootloader | U-Boot | ||||
| Expansion IF types | USB 2.0 | ||||
| USB ports | 1 | ||||
| USB Hub Compatible | Untested | ||||
| PoE | 802.3af, standard | ||||
| Power | 12 VDC, 1.5 A | ||||
| Connector type | barrel | ||||
|
| |||||
|
| |||||
| Other | |||||
|
| |||||
| Manuf/OEM/ODM | SerComm | ||||
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) | ||||
| Retail | |||||
| Availability | End of Life | ||||
| FCC approval date | 26 August 2013 | ||||
| (Est.) release date | 07 April 2016 | ||||
| UPC |
053926325429 (UPC DB, On eBay) | ||||
| Newegg | 9SIBZPFKFC0118 | ||||
| ASIN |
B01DYCFRHG | ||||
| Country of manuf | China | ||||
| Radio 1 | |||||
| Chip1 | Qualcomm Atheros QCA9558 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | U.FL | ||||
| MIMO status | 3x3:3 | ||||
| Wireless Standard | IEEE 802.11b/g/n | ||||
| 802.11n | up to 450 Mbps | ||||
| 802.11g | up to 54 Mbps | ||||
| 802.11b | up to 11 Mbps | ||||
| WiFi Operating Frequency | 2.4 GHz | ||||
| Radio 2 | |||||
| Chip1 | Qualcomm Atheros AR9580 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | U.FL | ||||
| MIMO status | 3x3:3 | ||||
| Wireless Standard | IEEE 802.11a/n | ||||
| 802.11n | up to 450 Mbps | ||||
| 802.11a | up to 54 Mbps | ||||
| WiFi Operating Frequency | 5 GHz | ||||
| |||||
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Aruba Networks devices with specifications, see Aruba Networks.
Overview
- AP-115 (integral antenna model)
"AJX00C-1.6" is silkscreened on the main board in the FCC photos.
"AQD00N0C-1.6" appears to be silkscreened on the RP-SMA connector boards.
- "PCB P/N: 21101938 REV: 01" and "(C) 2013 ARUBA NETWORKS"
- looks to be on the bottom of the board.
It may be using QCA9558 and a AR9380/AR9580 something else.
- It would seem probable this device is QCA based.
Per the FCC test report..
- The EUT is using ArubaOS (AOS) 6.3.0.0
- The stated dimensions are 170 mm x 170 mm x 45 mm
- The stated weight is 1 kg
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 23.05.2
Current supported version: 25.12.2
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 23.05.2
Current supported version: 25.12.2
WLAN Hardware: Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880
WLAN Comment: MIMO 3x3:3
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
WLAN Comment: MIMO 3x3:3
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
| git • >> |
|---|
ath79: add support for Aruba AP-115
Hardware
========
CPU Qualcomm Atheros QCA9558
RAM 256MB DDR2
FLASH 2x 16M SPI-NOR (Macronix MX25L12805D)
WIFI Qualcomm Atheros QCA9558
Atheros AR9590
Installation
============
1. Attach to the serial console of the AP-105.
Interrupt autoboot and change the U-Boot env.
$ setenv rb_openwrt "setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66;
netget 0x80060000 ap115.bin; go 0x80060000"
$ setenv fb_openwrt "bank 1;
cp.b 0xbf100040 0x80060000 0x10000; go 0x80060000"
$ setenv bootcmd "run fb_openwrt"
$ saveenv
2. Load the OpenWrt initramfs image on the device using TFTP.
Place the initramfs image as "ap105.bin" in the TFTP server
root directory, connect it to the AP and make the server reachable
at 192.168.1.66/24.
$ run rb_openwrt
3. Once OpenWrt booted, transfer the sysupgrade image to the device
using scp and use sysupgrade to install the firmware.
|
Categories:
- Aruba Networks
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System QCA9558
- Qualcomm Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Manuf SerComm
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System AR9580
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation