Avnet ZedBoard
From TechInfoDepot
Jump to navigationJump to search
| Single Board Computer | |
|
| |
| Homepage | Product page |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Avnet ZedBoard |
| Type | single-board computer |
| CPU1 | Xilinx XC7Z020 |
| CPU1 Speed | 667 MHz ( 2 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size | 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Xilinx XC7Z020 |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
| |
| Expansion IF types | SD, USB OTG, HDMI |
| USB ports | 1 |
| SD/MMC Slots | 1 |
| HDMI | 1 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 3 A |
| Connector type | barrel |
| Serial Port (UART) | yes |
| JTAG Port | yes |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
Xilinx not currently documented.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: zynq
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9_neon
Support started version: 19.07.0
Current supported version: 24.10.2
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9_neon
Support started version: 19.07.0
Current supported version: 24.10.2
Please insert instructions here