BT Openreach VG3503J v2
From TechInfoDepot
Jump to navigationJump to searchBT OpenReach vDSL Modem - VG3503J | |||||||||||||
WikiDevi.wi-cat.ru | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
BT Openreach VG3503J V2 | ||||||||||||
Board ID |
141350320004J | ||||||||||||
Type |
dsl modem | ||||||||||||
CPU1 |
Lantiq PSB 80910 | ||||||||||||
CPU1 Type |
MIPS 34Kc | ||||||||||||
CPU1 Speed |
333 MHz | ||||||||||||
Flash1 Chip |
Macronix Model? | ||||||||||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||
RAM1 Chip |
EltronTech Model? | ||||||||||||
ETH chip1 |
Lantiq PSB 80910 | ||||||||||||
Switch |
Lantiq PSB 80910 | ||||||||||||
Ethernet Port Count |
2-100MbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u | ||||||||||||
Port-based vlan |
Yes | ||||||||||||
Stock bootloader |
U-Boot | ||||||||||||
Stock FW OS |
Linux 2.6.20.19 | ||||||||||||
Expansion IF types |
none specified | ||||||||||||
Power |
12 VDC, 1 A | ||||||||||||
Connector type |
barrel | ||||||||||||
Serial Port (UART) |
yes, (115200, 8N1) | ||||||||||||
JTAG Port |
no | ||||||||||||
Flags: VDSL2, ADSL2+ | |||||||||||||
Other | |||||||||||||
| |||||||||||||
Manuf/OEM/ODM |
Arcadyan VG3503J 1-A-DC | ||||||||||||
3rd Party Firmware Support | |||||||||||||
Retail | |||||||||||||
Availability | End of Life | ||||||||||||
End of Life date | 2016 | ||||||||||||
|
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented BT device with specifications, see BT.
Overview
- Model: ECI B-FOCuS V-2FUb/r Rev.B
- (not ECI B-FOCuS V-2FUb/I Rev.B)
See also: ECI B-FOCuS O-4G2PW
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: lantiq
OpenWrt Subtarget: xrx200
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: 22.03.7
On the OpenWrt Wiki
OpenWrt Target: lantiq
OpenWrt Subtarget: xrx200
OpenWrt Package architecture: mips_24kc
Support started version: 15.05
Current supported version: 22.03.7
Please insert instructions here