BandLuxe R528

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Embedded LTE WiFi VoIP Router, Home Gateway
Homepage Product page
WikiDevi.wi-cat.ru BandLuxe R528
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev BandLuxe R528
FCC ID UZI-R528
Type wireless router, analog phone gateway
CPU1 Question? Ralink Model?
Flash1 Chip Eon EN25Q128-104FIP
Flash1 Size 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip SK hynix H5PS1G63EFR-S6C
ETH chip1 Ralink Model?
Ethernet Port Count 1-WAN
1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 00:26:FA
Ethernet OUI: 00:26:FA

Expansion IF types Mini PCIe (USB only)
Mini PCIe slots 1
Power 12 VDC, 2 A
Connector type barrel

Flags:
4G, CDMA

Other

Default SSID: LTE_ROUTER

Manuf/OEM/ODM Gemtek WVRTR-124GN
Retail
FCC approval date 19 April 2012
Radio 1
Chip1 Ralink Model?
Wireless interface OUI 00:26:FA
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

This device uses a Ralink RT??52 SoC.

"HW00741015 WVRTR-124GN_V01" and "ESX-X04-0701 RoHS" is silkscreened on the board in the FCC photos.

The Mini PCIe (USB) slot is occupied by a mobile broadband modem using the Qualcomm MDM9600 (Gobi) chip.

There is a label on the bottom of the board (in the FCC photos) with a MAC starting with 00:26:FA (BandRich).

The FCC router manual's sample SSID is LTE_ROUTER, which does seem to be used by (a very small number of) some BandRich (OUI 00:26:FA) devices. This is presumed to be the SSID (and OUI) for the device. The default IP may be 192.168.1.1, but the manual does not list the default credentials (Please refer to the Quick Start Guide included in the package.).