Beeline SmartBox Pro

multiple revisions of this device, use caution
abgn+ac (AC1200)
	Beeline SmartBox Pro AC1200 Wireless Router
Homepage	Product page
WikiDevi.wi-cat.ru	Beeline SmartBox Pro
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Beeline SmartBox Pro
Serial number prefix	SG15
FCC ID	none specified
Board ID	AWI00E-1.6
Type	wireless router, CPE
CPU1	MediaTek MT7621AT
CPU1 Type	MIPS 1004Kc
CPU1 Speed	880 MHz ( 2 cores ) 16-bit
Flash1 Chip	ESMT F59L2G81A-25T
Flash1 Size	256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND)
RAM1 Size	256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip	Nanya NT5CB128M16FP-DI
ETH chip1	MediaTek MT7621AT
Switch	MediaTek MT7621AT
Ethernet Port Count	1-1GbE-WAN; 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
	802dot11 OUI: D4:21:22 (1 E, 1 W); Ethernet OUI: D4:21:22 (1 E, 1 W)
Stock bootloader	U-Boot UBI
Stock FW OS	Linux
Expansion IF types	Mini PCIe, USB 2.0
Mini PCIe slots	1
USB ports	2
USB Hub Compatible	Untested
Power	12 VDC, 1.5 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header, J4, 3.3, (57600 8N1)
JTAG Port	yes, 14-pin header, J3
Other
	Default SSID: Beeline_2G_XXXXXX (3 addl. devices); , Beeline_5G_XXXXXX (3 addl. devices); Default IP address: 192.168.1.1; the IP 192.168.1.1 is used by 1359 additional devices; of which 7 are Beeline devices; Default login user: admin; Default login password: admin; admin:admin credentials used by 1358 additional devices; of which 7 are Beeline devices
Manuf/OEM/ODM	SerComm S1500
3rd Party Firmware Support	OpenWrt • (List \| Dev \| DLs);
Retail
Availability	Beeline only?
(Est.) release date	December 2014
Country of manuf	China
Radio 1
Chip1	MediaTek MT7602EN
Wireless interface OUI	D4:21:22
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7612EN
Wireless interface OUI	D4:21:22
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Beeline devices with specifications, see Beeline.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.),

• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.) = AC1200 class

Overview

"AWI00E-1.6" and "PALWONN" is silkscreened on the board in the photos.

OEM: SerComm

Links of Interest

Reviews

Review on content-review.com

SerComm manuf. (Palwonn) iXBT

Review on itreviewer.ru

OUI: D4:21:22 (SerComm) iXBT

Beeline SmartBox Pro review on Beeline

CPU: MediaTek MT7621A @880MHz MIPS 1004Kc

Flash: 256MB SLC NAND ESMT (F59L2G81A) iXBT

RAM: 256MB DDR3 Nanya (NT5CB128M16BP) iXBT

WLAN 2.4GHz: MediaTek MT7602E 2T2R 802.11bgn

WLAN 5GHz: MediaTek MT7612E 2T2R 802.11an+ac

Antenna: 2x 3.2dBi (2.4GHz), 2x 4.5dBi (5GHz) internal

Forum threads

Beeline SmartBox Pro on iXBT forums

Update and PCB photos (thanks to sahe)

Flash: ESMT F59L2G81A-25T (A9P1P38H2) 256MB

(SLC NAND, 2Gb, x8, 3.3v, 25ns, 48-pin TSOP)

RAM: Nanya NT5CB128M16FP-DI 256MB

(DDR3-1600, 2Gb, x16, 1.5v, 96-ball BGA)

Mini PCIe: J2 (52-pin, R274÷R279 on the board in the photos)

Wi-Fi 802.11ac Card / SSD / HDD w/ adapter

Beeline SmartBox Pro on zepete LJ (internal images)

Firmware • Bootlog • SuperUser • PSU

I.T.E. Power Supply MU18-R120150-C5

Beeline SmartBox PRO OpenWrt firmware

Flashing

NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum

Target: ramips
Subtarget: mt7621
Package architecture: mipsel_24kc
Supported Since Commit
Support started version: 23.05.0
Current supported version: 24.10.5

LAN Hardware: MediaTek MT7530
WLAN Hardware: MediaTek MT7602EN, MediaTek MT7612EN
WLAN Comment: MIMO 2x2:2 on both bands
Installation method(s):
see devicepage
Recovery method(s):
see devicepage
Recovery Comment:
sercomm-recovery util

git • >>

ramips: add support for Sercomm S1500 devices
This commit adds support for following wireless routers:
 - Beeline SmartBox PRO (Serсomm S1500 AWI)
 - WiFire S1500.NBN (Serсomm S1500 BUC)

This commit is based on this PR:
 - Link: https://github.com/openwrt/openwrt/pull/4770
 - Author: Maximilian Weinmann <x1@disroot.org>
The opening of this PR was agreed with author.

My changes:
- Sorting, minor changes and some movings between dts and dtsi
- Move leds to dts when possible
- Recipes for the factory image
- Update of the installation/recovery/return to stock guides
- Add reset GPIO for the pcie1

Common specification
--------------------
SoC:        MediaTek MT7621AT (880 MHz, 2 cores)
Switch:     MediaTek MT7530 (via SoC MT7621AT)
Wireless:   2.4 GHz, MT7602EN, b/g/n, 2x2
Wireless:   5 GHz, MT7612EN, a/n/ac, 2x2
Ethernet:   5 ports - 5×GbE (WAN, LAN1-4)
Mini PCIe:  via J2 on PCB, not soldered on the board
UART:       J4 -> GND[], TX, VCC(3.3V), RX
BootLoader: U-Boot SerComm/Mediatek

Beeline SmartBox PRO specification
----------------------------------
RAM (Nanya NT5CB128M16FP): 256 MiB
NAND-Flash (ESMT F59L2G81A): 256 MiB
USB ports: 2xUSB2.0
LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet
Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP)
Power: 12 VDC, 1.5 A
PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0
CSN: SG15********
MAC LAN: 94:4A:0C:**:**:**
Manufacturer's code: 0AWI0500QW1

WiFire S1500.NBN specification
------------------------------
RAM (Nanya NT5CC64M16GP): 128 MiB
NAND-Flash (ESMT F59L1G81MA): 128 MiB
USB ports: 1xUSB2.0
LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet
Buttons: 2 button (RESET, WPS)
Power: 12 VDC, 1.0 A
PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0
CSN: MH16********
MAC WAN: E0:60:66:**:**:**
Manufacturer's code: 0BUC0500RW1

MAC address table (PRO)
-----------------------
use   address   source
LAN   *:23      factory 0x1000 (label)
WAN   *:24      factory $label +1
2g    *:23      factory $label
5g    *:25      factory $label +2

MAC addresses (NBN)
-------------------
use   address   source
LAN   *:0e      factory 0x1000
WAN   *:0f      LAN +1 (label)
2g    *:0f      LAN +1
5g    *:10      LAN +2

OEM easy installation
---------------------
1. Remove all dots from the factory image filename (except the dot
   before file extension)
2. Upload and update the firmware via the original web interface
3. Two options are possible after the reboot:
   a. OpenWrt - that's OK, the mission accomplished
   b. Stock firmware - install Stock firmware (to switch booflag from
      Sercomm0 to Sercomm1) and then OpenWrt factory image.

Return to Stock
---------------
1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot:
   printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2
   reboot
2. Install stock firmware via the web OEM firmware interface

Recovery
--------
Use sercomm-recovery tool.
Link: https://github.com/danitool/sercomm-recovery

Tested-by: Pavel Ivanov
Tested-by: Denis Myshaev
Tested-by: Oleg Galeev
Tested-By: Ivan Pavlov
Co-authored-by: Maximilian Weinmann
Signed-off-by: Mikhail Zhilkin

JTAG-Serial Info

Serial

Serial Pinouts

  J4 
1 - GND
2 - Tx
3 - Vcc
4 - Rx

Superuser account

Superuser account gives you access to some additional settings and

allows to change network settings (initially locked by Beeline)

To use it login to web admin panel with this account:

Login: SuperUser
Password: Beeline$martB0xPr0

from v2.0.15:

Password: serial number

Pictures

User Images

PCB top
PCB bottom
SmartBox Pro board

Beeline SmartBox Pro

Overview

Links of Interest

Reviews

Forum threads

Flashing

Flashing OpenWrt

JTAG-Serial Info

Serial

Serial Pinouts

Superuser account

Pictures

See also

Navigation menu

Page actions

Page actions

Personal tools

empty section

Search

Navigation

data/misc

Tools

query forms

Shoutwiki

ShoutWiki messages