Belkin BoB (F1PI243EGau, iinet)
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
---|---|
ADSL2+ 11n DECT IAD | |
Homepage | |
Support | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Status Unknown |
Platform | |
Brand • Model • Rev |
Belkin BoB iinet (ver. 1000au) |
Model Part Number |
F1PI243EGau |
FCC ID |
none specified |
Board ID |
F1PI243EGau |
Type |
wireless router, dsl modem |
CPU1 |
Broadcom BCM6358 |
CPU1 Type |
BMIPS4350 |
CPU1 Speed |
300 MHz ( 2 cores ) |
Flash1 Chip |
Macronix MX29LV640BT |
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Chip |
Mira Model? |
ETH chip1 |
Broadcom BCM6358 |
Switch |
Realtek RTL8306G |
DSL Ports |
1 |
Ethernet Port Count |
4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Stock FW OS |
Linux 2.6.21.5 |
Expansion IF types |
USB 2.0 |
USB ports |
2 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 1.5 A |
Connector type |
barrel |
Serial Port (UART) |
yes |
Flags: ADSL2+, DECT | |
Other | |
Default SSID: WLAN (15 addl. devices) | |
Manuf/OEM/ODM |
Ayecom |
Retail | |
Availability | Australia only |
(Est.) release date | 11 August 2009 |
Country of manuf | China |
Radio 1 | |
Chip1 |
Broadcom BCM43222 |
Wireless interface OUI |
00:22:75,94:44:52 |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Belkin device with specifications, see Belkin.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
- "A610A354054R_R3" is silkscreened on the board. This is a presumed Ayecom P/N.
Per the manual, the default SSID is WLAN (probably w/ a secondary SSID of WLAN2, but it does not appear to be enabled by default).
Categories:
- Belkin
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Broadcom
- Embedded System BCM6358
- Broadcom
- Embedded System BMIPS4350
- Embedded System
- Embedded System Realtek
- Embedded System RTL8306G
- Realtek
- Manuf Ayecom
- Embedded System BCM43222
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation