Belkin F5D6130 v1

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
b (B11)
802.11b Wireless Network Access Point
Belkin F5D6130 v1.jpg
Support Support page
Wikipedia Belkin
WikiDevi.wi-cat.ru Belkin F5D6130 v1
3rd Party Firmware
dd-wrt Incompatible
OpenWrt Incompatible
Tomato any flavor Incompatible
Platform
BrandModelRev Belkin F5D6130 v1
FCC ID K7SF5D6130, LLM0102WA3001A
Type access point
Series F5D6130
CPU1 ☒N Atmel AT76C510
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Atmel AT76C510
ETH chip2 LSI Model?
Ethernet Port Count 2-10MbE-LAN
Wired Standard IEEE 802.3i

802dot11 OUI: 00:30:BD (5 E, 13 W)
Ethernet OUI: 00:30:BD (5 E, 13 W)

Expansion IF types none specified
Power 9 VDC, 1 A
Connector type barrel
Other

Default SSID: WLAN (15 addl. devices)
Default IP address: 192.168.0.254
the IP 192.168.0.254 is used by 49 additional devices
of which 0 are Belkin devices

Manuf/OEM/ODM Eumitcom WA3001A
Retail
FCC approval date 08 November 2001
Country of manuf Taiwan
Radio 1
Chip1 Atmel AT76C510
Chip2 Intersil Model?
Chip3 Intersil Model?
Wireless interface OUI 00:30:BD
Antenna Connector Type none specified
Wireless Standard IEEE 802.11b
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 FCC ID
Digital Path G1CPE150LLM0102WA3001A
RHK-G1CPE150
Eumitcom WA3001ALLM0102WA3001A
SMC SMC2655W v1LLM0102WA3001A
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Belkin F5D6130 v1AtmelAtmelIntersil
Belkin F5D6130 v2ADMtekADMtekRFMD

For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented LSI chipsets with specifications, see LSI.

For a list of all currently documented Belkin devices with specifications, see Belkin.

11 Mbps - 2.4GHz 802.11b = B11 class

Overview

"WA3001A Rev:T3.0" is silkscreened on the main board in the FCC photos. "Eumitcom Technology Inc." and "WL11000RFM Rev: T3.0" is silkscreened on the RF module.

There is no HTTP configuration interface for this device. You will be required to use Eumitcom's Access Point manager software.

Links of Interest