Belkin F5D7230-4 vA

multiple revisions of this device, use caution

bg (G54)
Wireless G Router
Support	Support page
Wikipedia	Belkin
WikiDevi.wi-cat.ru	Belkin F5D7230-4 vA
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Belkin F5D7230-4 vA
FCC ID	K7SF5D7230F
IC ID	3623A-F5D7230F
Type	wireless router
Series	F5D7230-4
CPU1	Atheros AR2317
CPU1 Type	MIPS 4KEc
CPU1 Speed	180 MHz
Flash1 Chip	Eon P16-75HCP
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip	ISSI IC42S16400F-7TL
ETH chip1	Atheros AR2317
Switch	Atheros AR8216
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:1C:DF (16 E, 32 W) Ethernet OUI: 00:1C:DF (16 E, 32 W)
Stock FW OS	SuperTask!
Expansion IF types	none specified
Power	9 VDC, 1 A
Connector type	barrel
Flags: boot log
Other
Default SSID: belkin54g (12 addl. devices) Default IP address: 192.168.2.1 the IP 192.168.2.1 is used by 297 additional devices of which 99 are Belkin devices
Manuf/OEM/ODM	Arcadyan
Retail
FCC approval date	14 March 2008
Country of manuf	China
Radio 1
Chip1	Atheros AR2317
Wireless interface OUI	00:1C:DF
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Belkin F5D7230-4 v1 Broadcom Broadcom Broadcom Belkin F5D7230-4 v1 (v1444) Broadcom Broadcom Broadcom Belkin F5D7230-4 v2 Broadcom Broadcom Broadcom Belkin F5D7230-4 v3 Broadcom Broadcom Broadcom Belkin F5D7230-4 v4 Marvell Marvell Marvell Belkin F5D7230-4 v5 Atheros Atheros Belkin F5D7230-4 v6 Marvell Marvell Marvell Belkin F5D7230-4 v7 Atheros Atheros Belkin F5D7230-4 v8 Broadcom Broadcom Belkin F5D7230-4 v9 Realtek Realtek Realtek Belkin F5D7230-4 vA Atheros Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Belkin device with specifications, see Belkin.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"141400520023J REV: 0A1" is silkscreened on the board in the FCC photos. The same board part number is on the Belkin F5D7234-4 v3.

"141400520023J REV: 01"" is silkscreened on a production model board.

It would appear (and is being assumed) that the SuperTask! RTOS is used on this device.

Links of Interest

• On the DD-WRT Forums

JTAG-Serial Info

Serial

Boot Log (from above DD-WRT forums post)

Boot Log

ar531xPlus rev 0x00000090 boot loader startup... Flash initialized SDRAM initialized Cache initialized Copy program from 0xbfc00000 to 0x80520000, length 0x0000d284 bytes ... done Jump to SDRAM 0x80520cb4 [0x10000008, 0x00000000, 0x00000000] Clear BSS section ... done Stack: 0x8053f0b0 Heap: 0x8053f0c0 ========================================================================= Wireless Gateway WG4005G 1-LF-AK Loader 0.05 build Jan 3 2008 16:41:29 Arcadyan Technology Corporation ========================================================================= Copying boot params.....DONE cpuFreq=240000000 sysFreq=60000000 cntFreq=120000000 Press any key to enter command mode ... Checking Valid Image in Flash... Passed. failed(4) Try to find image for running... Valid Code found in the Flash done Uncompressed size = 2455721 I am going to run the Code image from 80001000 firmware startup... Stack: 0x807bcd50 Heap: 0x807bcd60 [GPIO FLOW] SetGpio() Begin .. /home/titan_liu/Project/AP65_Linux/Broadband_SuperTask/ttf2004_GW61_Vista/ttf2007_GW61_Vista/source/firmware/hardware/ar5312/ar531xbsp.c:bsp_gpio_init is called [GPIO FLOW] SetGpio() End. ##### _ftext = 0x80001000 ##### _fdata = 0x80231060 ##### __bss_start = 0x802588A9 ##### end = 0x807ACD50 ##### stack size = 0x10000 ##### Backup Data from 0x80231060 to 0x807BCD50, size = 161865 bytes install_exception Installing TLB Refill exception handler from 80008D00 to 80000000, size=192 Installing General exception handler from 80008DC0 to 80000180, size=16 Installing Interrupt exception handler from 80008DD0 to 80000200, size=160 misc_int_init mips_int_enable : 0x00000400 Connect the AHB interrupt sysBoardDataInit Init the GPIOs !!! Enable arbitration for SOC devices !!! cpuFreq=184000000 sysFreq=40000000 cntFreq=92000000 should call WLanReset.. AR531X_TIMER=00061A6D AR531X_RELOAD=00061A80 time1 0003a92d, time2 0003a921 AR531X_IMR=00000028 mips_cp0_status=10000401 mips_cp0_cause=00800000 Runtime code version: A.00.11 System startup... [INIT] Memory COLOR 0, 800000 bytes .. [INIT] Memory COLOR 1, 500000 bytes .. [INIT] Memory COLOR 2, 351200 bytes .. Flash Found. It is 2MB Flash.... Set flash memory layout to ar531xmac_set_macaddr : next = 10Boot Parameters found !!! Bootcode version: 0.05 Serial number: BE701644386 Hardware version: 01 sizeof(struct III_Config_t) is 65492 >>> etcpip_init_config() copy over gSKUID=17, ChannelBound=13, CountryCode=8210 default route: 0.0.0.0 BufferInit: BUF_HDR_SZ=48 BUF_ALIGN_SZ=4 BUFFER_OFFSET=112 BUF_BUFSZ0=272 BUF_BUFSZ1=1776 NUM_OF_B0=0 NUM_OF_B1=600 BUF_POOL0_SZ=0 BUF_POOL1_SZ=1094400 sizeof(BUFFER0)=320,sizeof(BUFFER1)=1824 *BUF0=0x805caf78 *BUF1=0x804bfc68 Altgn *BUF0=0x805caf80 *BUF1=0x804bfc70 End at BUF0:0x805caf80, BUF1:0x805caf70 BUF0[0]=0x805caf80 BUF1[0]=0x804bfc70 buffer0 pointer init OK! buffer1 pointer init OK! gConfig.Interface[0].IP_Addr = 127.0.0.1 gConfig.Interface[0].Subnet_Mask = 255.255.255.255 time = 08/01/2003, 00:00:00 Interface 0 ip = 127.0.0.1 gConfig.Interface[1].IP_Addr = 192.168.0.31 gConfig.Interface[1].Subnet_Mask = 255.255.255.0 ar531xmac_init: ifno=1, initstr=UNIT=0 VLAN=1 /home/titan_liu/Project/AP65_Linux/Broadband_SuperTask/ttf2004_GW61_Vista/ttf2007_GW61_Vista/source/firmware/hardware/ar5312/ar531xbsp.c:sysEnetInit is called ae531xEndLoad: loading device ... ae531xEndLoad: unit=0, pDmaBuf=0xa030d694, dmaBufSize=5136, txDescCount=128, rxDescCount=128, clCount=256 ae531xEndLoad: System param: mac=b0500000, dma=b0501000, ivec=4, ilev=1000 ae531xEndLoad: Flash ea = xx:xx:xx:xx:xx:xx ae0 qt = 1, buf begin = 80000000, buf end = 80000000 ae0 qt = 1, drsc begin = a030d6a0, desc end = a030e08c Tx Queue b=0xa030d6a0, e=0xa030e08c, c=0xa030d6a0, s@c=0x 0 ae0 qt = 2, buf begin = 804bfce2, buf end = 804f85c2 ae0 qt = 2, drsc begin = a030e0a0, desc end = a030ea8c Rx Queue b=0xa030e0a0, e=0xa030ea8c, c=0xa030e0a0, s@c=0x80000000 ae531xMemInit: Memory setup complete. enter athr_VLANInit ae0 Phy Setup Failed Please check the ethernet cable on port 0! eth0: duplex 0, link 0 ae_SetMacFromPhy: enet0 as full duplex, 10Mbps ae0: setting TXDP=0xa030d6a0 RXDP=0xa030e0a0 ae0 Verify MAC address B1DF1C00 00000985 sb = xx xx xx xx xx xx ae531xRxFilterConfig: MacControl = 1014000C ae531xEndLoad: Done loading, pDrvCtrl=8030D48C txQ=8030D4B8 rxQ=8030D4CC ae_unitLinkGained : ae_SetMacFromPhy: enet0 as full duplex, 10Mbps call ae531xStart ae531xStart: Interrupt connected 0x0 0x4 0x80176EC8 0x8030D48C. ae531xDmaIntEnable 0001a1e2 ae531xStart: complete. im = 0001A1E2, is = 00660004. mips_int_enable : 0x00001400 Wake up DHCP client ar531xmac_init: enet0 set to VLAN mode ar531xmac_init: enet0 interface 1 registered to VLAN 1 DmaStatus = 0x 660004 DmaBusMode = 0x 2084 DmaRxBase = 0x 30e0a0 DmaTxBase = 0x 30d6a0 DmaControl = 0x 202002 DmaIntr = 0x 1a1e2 MacControl = 0x1014000c MacAddrHi = 0x xxx MacAddrLo = 0xxxxxxxxx MacVlan1 = 0x xxxx MacVlan2 = 0x x Rx Queue b=0xa030e0a0, e=0xa030ea8c, c=0xa030e0a0, s@c=0x80000000 Current Rx buffer = 0x 4bfce2 Tx Queue b=0xa030d6a0, e=0xa030e08c, c=0xa030d6a0, s@c=0x 0 Current Tx buffer = 0x 0 time = 08/01/2003, 00:00:00 ae531xRxFilterConfig: MacControl = 1014000C Interface 1 ip = 192.168.0.31 ae531xRxFilterConfig: MacControl = 1014000C gConfig.Interface[2].IP_Addr = 0.0.0.0 gConfig.Interface[2].Subnet_Mask = 0.0.0.0 ar531xmac_init: ifno=2, initstr=UNIT=0 VLAN=2 ar531xmac_init: driver already loaded, number of instances is 2 ar531xmac_init: enet0 set to VLAN mode ar531xmac_init: enet0 interface 2 registered to VLAN 2 DmaStatus = 0x 660004 DmaBusMode = 0x 2084 DmaRxBase = 0x 30e0a0 DmaTxBase = 0x 30d6a0 DmaControl = 0x 202002 DmaIntr = 0x 1a1e2 MacControl = 0x1014000c MacAddrHi = 0x xxx MacAddrLo = 0xxxxxxxxx MacVlan1 = 0x xxxx MacVlan2 = 0x x Rx Queue b=0xa030e0a0, e=0xa030ea8c, c=0xa030e0a0, s@c=0x80000000 Current Rx buffer = 0x 4bfce2 Tx Queue b=0xa030d6a0, e=0xa030e08c, c=0xa030d6a0, s@c=0x 0 Current Tx buffer = 0x 0 time = 08/01/2003, 00:00:00 iput_IpLinkUp(ifno=2)> ifp->add_default_route:1 Re-Init NAT data structure Init NAT data structure Interface 2 ip = 0.0.0.0 gConfig.Interface[4].IP_Addr = 0.0.0.0 gConfig.Interface[4].Subnet_Mask = 255.255.255.0 [HWLAN] ifno=4 irno=7 port=0x00000000 [HWLAN] pRadio->abolt = 00000000 [HWLAN] pRadio->abolt = 00000000 [HWLAN] gSetting.BasicRate=f [HWLAN] apCfgDefaultSet : prepare to set WDS.. apInit: Initialize Access Point. [HWLAN] ar5hwcCreatePhy : ifno:4 pdevInfo=80386748, devno=1 [HWLAN] devno 1 pdevInfo 80386748 [HWLAN] Base address = b0000000, irq 3 Attach AR5212 0x13 0x80386748 [HWLAN] DOMAIN 00008210 [HWLAN] MAC Address=xx-xx-xx=xx-xx-xx [HWLAN] wlan1 revisions: mac 11.0 phy 4.8 analog 8.6 eeprom 5.3 [HWLAN] phwChannel 2462, channelFlags 00005400 [HWLAN] size of ATHEROS_DESC hardware part 32 [HWLAN] CACHE_LINE_SIZE 16, AR_DESC_SIZE 128 [HWLAN] AR_HEADER_SIZE 96, AR_BUF_SIZE 1696numDescriptors = 704 <<< Try to NonCache 223264 [HWLAN] wlan1: pDmaBuf=A025A330 [HWLAN] pMemBuf a025a330 pdevInfo->pDmaBuf a025a330 [HWLAN] ar5hwcQueueCreate: semaphore id 802d3aac [HWLAN] ar5hwcQueueCreate: semaphore id 802d3ac0 [HWLAN] ar5hwcQueueCreate: semaphore id 802d3ad4 [HWLAN] ar5hwcQueueCreate: semaphore id 802d3ae8 [HWLAN] pMemBuf a0276330, pdevInfo->pDmaBuf + pdevInfo->dmaBufSize a0290b50 [HWLAN] muxDevLoad is called for vportNum 10000, loadfn 800d5f3c, vportStr 16: 0: 1 [HWLAN] ioctl CMD=0xb mips_int_connect: ivec 3 ar5hwcInt 800ba644 pdevInfo 80386748 mips_int_enable : 0x00001C00 [HWLAN] bridgePortAdd : vp, 10000 [HWLAN] bridgePortAdd (base BSS) succeeded for vp1 wlan1 added STA: 00:1c:df:b1:85:09 (2530) [HWLAN] ifno=4 after call apInit() : .... bg 1 , a 0 .... time = 08/01/2003, 00:00:00 [HWLAN] hwlan_ioctl() .. Interface 4 ip = 192.168.0.31 [HWLAN] hwlan_ioctl() .. ruleCheck()> Group: 0, Error: Useless rule index will be truncated ruleCheck()> Group: 1, Error: Useless rule index will be truncated ruleCheck()> Group: 2, Error: Useless rule index will be truncated CBAC rule format check succeed !! reqCBACBuf()> init match pool, Have: 50 Memory Address: 0x80796874 ~ 0x80796e08 reqCBACBuf()> init timeGap pool, Have: 2000 Memory Address: 0x80796e08 ~ 0x807a0a5c reqCBACBuf()> init sameHost pool, Have: 200 Memory Address: 0x807a0a5c ~ 0x807a237c CBAC rule pool initialized !! Init NAT data structure No default route, no need to reinit the NAT data structure RUNTASK id=2 if_task if0... RUNTASK id=3 if_task if1... RUNTASK id=4 if_task if2... RUNTASK id=5 if_task if4... RUNTASK id=6 timer_task... RUNTASK id=7 conn_mgr... RUNTASK id=8 main_8021x... RUNTASK id=9 main_lltd... RUNTASK id=10 period_task... RUNTASK id=11, dhcp_clt task success... RUNTASK id=12 pptp_callmgr... httpd: listen at 192.168.0.31:80 HTTPD TIMER_RESOURCE:5, FS_RESOURCE:6 RUNTASK httpd... RUNTASK id=15 dnsproxy... UPnP is enabled UPNP Device initialize success! slot=16 >>> belkin_wan_cfg task runs successfully, task_id = 17 RUNTASK id=18 wscmain... RUNTASK id=19 wsc_Send_eap_packet... RUNTASK id=20 wsc_Send_UPNP_packet... RUNTASK id=21 WSC_WaitUserAction_Task... Starting Multitask... load_lang_table to : English.cpz get_language /www/doc/English.cpz, size=70207, >>>>>>>> RUNTASK id=22 hwlan_light_isr... RUNTASK id=23 led_task... MTstart2() begin ... init psock cnt=12 turn on hwlan light ********************************************* Wi-Fi Simple Config Application - Intel Corp. Version: Build 1.02, May@#*@#*@#*EAP-WSC: Entered eap_wsc_init *#@*#@*#@ Entered udp_read wsc_Send_eap_packet:udpFdupnp_wcn:16;;udpFdupnp:1WSC_WaitUserAction:wait user action:2 ser action:2 ********************************************* Initializing stack... ---------in wsc init---------- -8 ---------sizeof(uint32)=4 ----------sizeof(uint-long)=4 ----------sizeof(uint32)=2 [18]pthread_cond_init: 0 [18]pthread_mutex_init: resource No. 26 [18]pthread_mutex_init: resource No. 27 [PORTABLITY]:WscCreateThread--------------WscCmd:ActualCBThreadProc: Started ------ ====================== 0x00000000,Function=0x800A50B4 PC=0x800A50F4 0x00000001,Function=0x801AC74C PC=0x801AC7DC 0x00000002,Function=0x8002C168 PC=0x8002C26C 0x00000003,Function=0x80upnp_Init: flag=0 SSDP Initialization completed0eted... 0x00000004,Function=0x80003020 PC=0x80003018 0x00000005,Function=0x00000000 PC=0xFFFFFFF8 ============. PC=0xFFFFFFF8 GenaInit : event_hook is NULL!! =nt_hook is NULL!! Atheros_NetTask running ... [18]pthread_cond_init: 1 [18]pthread_mutex_init: resource No. 28 [18]pthread_mutex_init: resource No. 29 [WscCmd:ActualUIThreadProc: Started. ActualUIThreadProc: wait q PtualUIThreadProc: wait q ====================== 0x00000000,Function=0x800A50B4 PC=0x800A50F4 0x00000001,Function=0x801AC74C PC=0x801AC7DC 0x00000002,Function=0x8002C168 PC=0x8002C33C 0x00000003,Function=0x8002BFE4 PC=0x8002C064 0x00000004,Function=0x80003020 PC=0x80003018 0x00000005,Function=0x00000000 PC=0xFFFFFFF8 ====================== MasterControl constructor WscCmd::MC instantiated ok [18]pthread_cond_init: 2 [18]pthread_mutex_init: resource No. 30 [18]pthread_mutex_init: resource No. 31 [PORTABLITY]:WscCreateThread-------------------- ====================== 0x00000000,Function=0x800A50B4 PC=0x800A50F4 0x00000001,Function=0x801AC74C PC=0x801AC7DC 0x00000002,Function=0x801B0F18 PC=0x801B100C 0x00000003,Function=0x8002C168 PC=0x8002C3C4 0x00000004,Function=0x8002BFE4 PC=0x8002C064 0x00000005,Function=0x80003020 PC=0x80003018 0x00000006,Function=0x00000000 PC=0xFFFFFFF8 ====================== [18]pthread_mutex_init: resource No. 32 [PORTABLITY]:pthread_mutex_init-------------------- CTransport Construction [18]pthread_cond_init: 3 [18]pthread_mutex_init: resource No. 33 [18]pthread_mutex_init: resource No. 34 [PORTABLITY]:WscCreateThread-------------------- ====================== 0x00000000,Function=0x800A50B4 PC=0x80In CTransport::ActualCBThreadProc ActualCBThreadProc: Calling Dequeue 0A50F4 0x00000001,Function=0x801AC74C PC=0x801AC7DC 0x00000002,Function=0x801AFD70 PC=0x801AFE18 0x00000003,Function=0x801B0F18 PC=0x801B1174 0x00000004,Function=0x8002C168 PC=0x8002C3C4 0x00000005,Function=0x8002BFE4 PC=0x8002C064 0x00000006,Function=0x80003020 PC=0x80003018 0x00000007,Function=0x00000000 PC=0xFFFFFFF8 ====================== MC::Init: Init complete ok WscCmd::MC intialized ok WscCmd::Init ok, starting stack... Info::ReadConfigFile: Called Info::ReadConfigFile:€"ç Info::ReadConfigFile:File open ok ******************uuid_p:0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx***** mp_deviceInfo->uuid[i]: x-x-x-x-x-x-x-x-xx-x-x-xx-xx-xx-xx-x- mp_deviceInfo->macAddr:xx:xx:xx:xx:xx:xx gSetting.dot1x.if_entry[0].enableWEP:0 authTypeFlags is 1 ,encrTypeFlags is 1 ,m_nwKey is , key len is 0 ssid is belkin54g S, 14e E, 1c1 RegistrarSM constructor [18]pthread_cond_init: 4 [18]pthread_mutex_init: resource No. 35 [18]pthread_mutex_init: resource No. 36 [PORTABLITY]:WscCreateThread-------------------- ====================== 0x00000000,Function=0x800A50B4 PC=0x800A50F4 0x00000001,Function=0x801AC74C PC=0x801AC7DC 0x00000002,Function=0x800093CC PC=0x800094B8 0x00000003,Function=0x801C2128 PC=0x801C2138 0x00000004,Function=0x801B4090 PC=0x801B4238 0x00000005,Function=0x801B15B8 PC=0x801B171C 0x00000006,Function=0x8002BFE4 PC=0x8002C094 0x00000007,Function=0x80003020 PC=0x80003018 0x00000008,Function=0x00000000 PC=0xFFFFFFF8 ====================== [18]pthread_mutex_init: resource No. 37 [PORTABLITY]:pthread_mutex_init-------------------- RegistrarSM constructor [18]pthread_cond_init: 5 [18]pthread_mutex_init: resource No. 38 [18]pthread_mutex_init: resource No. 39 [PORTABLITY]:WscCreateThread-------------------- ====================== 0x00000000,Function=0x800A50B4 PC=0x800A50F4 0x00000001,Function=0x801AC74C PC=0x801AC7DC 0x00000002,Function=0x800093CC PC=0x800094B8 0x00000003,Function=0x801B4090 PC=0x801B42D0 0x00000004,Function=0x801B15B8 PC=0x801B171C 0x00000005,Function=0x8002BFE4 PC=0x8002C094 0x00000006,Function=0x80003020 PC=0x80003018 0x00000007,Function=0x00000000 PC=0xFFFFFFF8 ====================== c_devPwd:org:12345670 **************mcp_devPwd:12345670;; in startMonitor.... CInbEap Construction Sizeof(WSC_NOTIFY_DATA) = -2143184464 ---test--sizeof(WSC_NOTIFY_DATA) = 36 [18]pthread_cond_init: 6 [PORTABLITY]:WscCreateEvent-------------------- Entered udp_open Socket open successful, sd: -2143184480 Entered udp_open Socket open successful, sd: -2143184480 Entered udp_bind Binding successful for socket [-2143184496] [PORTABLITY]:WscCreateThread-------------------- ====================In CInbEap::StaticRecvThread CInbEap::ActualRecvThread Started Entered udp_read =ead Started 0x00000000,Function=0x800A50B4 PC=0x800A50F4 0x00000001,Function=0x801AC74C PC=0x801AC7DC 0x00000002,Function=0x801C06F0 PC=0x801C0728 0x00000003,Function=0x801AFE80 PC=0x801B008C 0x00000004,Function=0x801B4090 PC=0x801B43A4 0x00000005,Function=0x801B15B8 PC=0x801B171C 0x00000006,Function=0x8002BFE4 PC=0x8002C094 0x00000007,Function=0x80003020 PC=0x80003018 0x00000008,Function=0x00000000 PC=0xFFFFFFF8 ====================== in startMonitor.... CInbUPnPDev Construction Entered udp_open Socket open successful, sd: -2143184480 Entered udp_open Socket open successful, sd: -2143184480 Entered udp_bind Binding successful for socket [-2143184496] CInbUPnPDev StartMonitor [PORTABLITY]:In CInbUPnPDev::StaticUPnPThread end UPnPCreateMicroStack Entered udp_read Wad ====================== 0x00000000,Function=0x800A50B4 PC=0x800A50F4 0x00000001,Function=0x801AC74C PC=0x801AC7DC 0x00000002,Function=0x801C15E4 PC=0x801C1630 0x00000003,Function=0x801AFE80 PC=0x801B008C 0x00000004,Function=0x801B4090 PC=0x801B43B0 0x00000005,Function=0x801B15B8 PC=0x801B171C 0x00000006,Function=0x8002BFE4 PC=0x8002C094 0x00000007,Function=0x80003020 PC=0x80003018 0x00000008,Function=0x00000000 PC=0xFFFFFFF8 ====================== MC::SwitchModeOn: Exit MC::StartStack: Informing app of mode -WscCmd::CallbackProc Enqueue done MC::SwitchModeOn: Done callback exit ws@@[25]pthread_mutex_unlock: the res is free 26-- -2145576636 WscCmd:ActualCBThreadProc: CB_MAIN_PUSH_MODE recd c MODE: Access Point ******* ******* MODE: Access Point ******* -@@[29]pthread_mutex_unlock: the res is free 28-- -2145574540 *******p_header->eType:1 Options: 0. Quit 1. Get configured 2. Get configured via push-button 3. Get configured using IEs Enter selection: ***gp_mc->mp_info->GetSwitchMode():1 mp_info->GetSwitchMode():1:e_currMode:1,,e_targetMode:3 mp_deviceInfo->authTypeFlags:1 mp_deviceInfo->encrTypeFlags:1 ********cp_devPwd:12345670***** mp_deviceInfo->authTypeFlags:1 mp_deviceInfo->encrTypeFlags:1 MC::SetBeaconIE: call to trans->SetBeaconIE() ok MC::SetProbeRespIE: call to trans->SetProbeRespIE() ok Waiting for Registrar to connect... WscCmd::unconfig initiated ActualUIThreadProc: wait q [HWLAN] Ready