Belkin F7D3302
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| Share Wireless Router | |
 | |
| Support | |
| Wikipedia | |
| InfoDepot Wiki | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt | |
| Tomato any flavor | |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Belkin F7D3302 v1 |
| FCC ID | |
| IC ID | |
| Type |
wireless router |
| CPU1 |
Broadcom BCM4718A1 |
| CPU1 Type |
MIPS 74Kc |
| CPU1 Speed |
480 MHz |
| Flash1 Chip |
Eon EN29LV640B-90TIP |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Parallel) |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
EtronTech EM68B16CWPA-25H |
| ETH chip1 |
Broadcom BCM4718A1 |
| Switch |
Broadcom BCM5325E |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
| Stock bootloader |
CFE |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1.0 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes |
| JTAG Port |
yes |
| Other | |
|
Default SSID: Belkin.XXXX (6 addl. devices) | |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| FCC approval date | 23 February 2010 |
| ASINs |
B003CJTNK4  B003CJTNK4  |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Broadcom BCM4718A1 |
| Wireless interface OUI |
94:44:52 |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio cor_rev |
17 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Belkin device with specifications, see Belkin.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
The default SSID may follow the pattern of Belkin.XXXX.
Links of Interest
Per the DD-WRT wiki, the same hardware is used by the F7D7302.
- CFE boot log screenshot on the DD-WRT forums
- New Belkin Routers (04/2010) On the DD-WRT Forum
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
 | WARNING: Always use TFTP to flash Belkin routers if at all possible! Upgrading dd-wrt from the web interface can lead to a bricked (nonfunctional) unit! |
Supported by dd-wrt as of = v24 k2.6 15156
Please insert instructions here
Flashing OpenWrt
Please insert instructions here
Flashing Tomato
Please insert instructions here
USB Info
DD-WRT USB
- The USB port is where you can connect an external USB hard drive or flash drive. Which can do a multitude of things. You can use in as a NAS, storage for a FTP server, use Optware to run external programs like torrent software, samba for sharing files to network, share a USB printer with network... The list of possibilities is long, it just takes a little research.
- ProFTPd, samba, dlna, raid support is included in most the newer builds of dd-wrt. Check the features chart to be sure.
Pictures
Categories:
- Belkin
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM4718A1
- Broadcom
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System BCM5325E
- Manuf Arcadyan
- DD-WRT Supported
- Tomato Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- User Photo's Needed
- FCC Photo's Needed
- English Documentation
