Belkin F7D7602 v2

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N300)
NetCam HD+
Belkin F7D7602.jpg
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Belkin F7D7602 v2
FCC ID
IC ID
Board ID
75076230
Type
camera
CPU1
CPU1 Type
MIPS 24KEc
CPU1 Speed
580 MHz 32-bit
Flash1 Chip
Winbond Model?
Flash1 Size
? MiB
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR2)
RAM1 Chip
Brand? 64X16DDR2
ETH chip1
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: EC:1A:59 (2 E, 10 W)

Expansion IF types
none specified
Power
5 VDC, 1 A
Connector type
barrel
Serial Port (UART)
yes, unpopulated, 4-pin header, internal, 3.3V TTL

Additional chips
Multimedia Processor;AIT;AIT8433T;;1;
Mono Audio Codec;Nuvoton;NAU8810YG;;1;

Other

Default SSID: NetCamHDXXXX (1 addl. devices)

Retail
FCC approval date 12 February 2014
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
EC:1A:59
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Belkin F7D7602 v1RalinkRalink
Belkin F7D7602 v2MediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Belkin device with specifications, see Belkin.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"75076230", "2013-09-17", and "REV A3" is silkscreened on the board in the FCC photos.

Also per the FCC photos, this device is using...

  • the MT7620A WiSoC
  • a Winbond' Flash chip
  • an AIT AIT8433T multimedia processor
  • a Nuvoton NAU8810YG mono audio codec

Per the FCC label and the example label in the external photos...

  • the device has a default setup SSID pattern of NetCamHDXXXX (where XXXX appears to be the last 4 digits of the wireless interface MAC [upper case letters])
  • a EC:1A:59 OUI is shown

Probable used PSU(s)

The power supply shown used in the FCC external photos is a Belkin-branded DVE DSA-5PFE-05 FUS 050100.

DVE DSA-5PFE-05 FUS 050100 (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.2 A
 Input connector: NEMA 1-15P
Style: small, horiz.  Eff. level: 3
Output: 5 VDC, 1 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??