Belkin F9K1003

bgn (N450)
N450 Wireless N+ Router
Homepage	Product page
Support	Support page
Wikipedia	Belkin
WikiDevi.wi-cat.ru	Belkin F9K1003
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Belkin F9K1003 v1
FCC ID	K7SF9K1003V1
IC ID	3623A-F9K1003V1
Type	wireless router
CPU1	Ralink RT3883
CPU1 Type	MIPS 74Kc
CPU1 Speed	500 MHz
Flash1 Chip	Macronix MX25L6406EM2I-12G
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	EtronTech EM68B16CWPA-25H
ETH chip1	Ralink RT3883
Switch	Realtek RTL8367R
Ethernet Port Count	1-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: 08:86:3B (10 E, 14 W) Ethernet OUI: 08:86:3B (10 E, 14 W)
Stock bootloader	U-Boot 1.7.4 Ralink 3.5.2.0
Stock FW OS	Linux 2.6.22
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Serial Port (UART)	yes, 4-pin header, populated, 3.3V TTL, (57600 8N1), JP12
Other
Default SSID: belkin.XXX (19 addl. devices) Default IP address: 192.168.2.1 the IP 192.168.2.1 is used by 297 additional devices of which 99 are Belkin devices
Manuf/OEM/ODM	Arcadyan
Retail
FCC approval date	27 April 2011
UPC	722868817841 (UPC DB, On eBay)
ASIN	B004N625A0
Country of manuf	China
Radio 1
Chip1	Ralink RT3883
Wireless interface OUI	08:86:3B
Antenna Connector Type	soldered
MIMO status	3x3:3
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 450 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Belkin device with specifications, see Belkin.

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = N450 class

Overview

A triangular RoHS logo / indicator and "P/N: 141710520000J R01A" is silkscreened on the board.

2.4 GHz only, 10/100/1000 Ethernet

The default SSID pattern is belkin.XXX where XXX is the last three hex

digits of the wireless interface MAC address (lower case letters).

An example SSID is belkin.618 where the WLAN MAC is 08:86:3B:27:16:18.

JTAG-Serial Info

Serial

Serial Pinouts

^ to RAM

© (GND)
© (RxD)
© (TxD)    
® [3.3]    NC
J12

v to shield