Belkin F9K1009 v1

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bgn (N150)
Wireless N150 Router
Belkin F9K1009.jpg
Wikipedia Belkin
InfoDepot Wiki Belkin F9K1009 v1
WikiDevi.wi-cat.ru Belkin F9K1009 v1
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Belkin F9K1009 v1
FCC ID K7SF9K1009V1
Board ID AP699E9NL
Type wireless router
CPU1 Question? Realtek Model?
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Realtek Model?
Switch Realtek Model?
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 08:86:3B (10 E, 14 W)
Ethernet OUI: 08:86:3B (10 E, 14 W)

Expansion IF types none specified
Power 12 VDC, 0.5 A
Connector type barrel
Serial Port (UART) yes, internal, 4-pin header, 3.3V TTL
JTAG Port probably
Other

Default SSID: belkin.XXX (19 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 298 additional devices
of which 99 are Belkin devices

Manuf/OEM/ODM SGE
Retail
Availability End of Life
FCC approval date 16 April 2014
Country of manuf China
Radio 1
Chip1 Realtek RTL8188RE
Wireless interface OUI 08:86:3B
Antenna Connector Type none
MIMO status 1x1:1
Wireless Standard IEEE 802.11b/g/n
802.11n up to 150 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Belkin F9K1009 v1RealtekRealtek
Belkin F9K1009 v2RealtekRealtek

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Belkin devices with specifications, see Belkin.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"AP699E9NL"<......>" and "REV"<..>"1.0" kind of looks like it's silkscreened on the board in the FCC photos. .. but the photo quality is terrible.

Default settings are per the FCC manual + sample label.

The OUI used (08:86:3B) is per the sample label. The SSID format would seem to be belkin.XXX, but the pattern of the last 3 characters is not known.

Probable included PSU(s)

The power supply shown in the FCC photos is a Shenzhen Gongjin Electronics S05A12-120A050-P4.

Shenzhen Gongjin Electronics S05A12-120A050-P4 (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.3 A
 Input connector: NEMA 1-15P
Style: medium, horiz.  Eff. level: 5
Output: 12 VDC, 0.5 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??