Kimax KI-U25AWF
bgn (N300) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mobile NAS | |||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt |
Status Unknown | ||||||||||||
| OpenWrt | |||||||||||||
| Tomato any flavor |
Incompatible | ||||||||||||
| Gargoyle |
Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Kimax KI-U25AWF | ||||||||||||
| FCC ID |
none specified | ||||||||||||
| Type |
mobile NAS | ||||||||||||
| CPU1 | |||||||||||||
| CPU1 Type |
MIPS 24KEc | ||||||||||||
| CPU1 Speed |
580 MHz | ||||||||||||
| Flash1 Chip |
Brand? Model? | ||||||||||||
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
| RAM1 Chip |
Macronix MX25L12805D | ||||||||||||
| ETH chip1 | |||||||||||||
| Ethernet Port Count |
1-100MbE-LAN | ||||||||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||||||||
|
802dot11 OUI: none specified | |||||||||||||
| Stock bootloader |
U-Boot 1.1.3 | ||||||||||||
| Stock FW OS |
Linux 3.14.18 | ||||||||||||
| Expansion IF types |
USB 2.0, USB 3.0 | ||||||||||||
| USB ports |
2 | ||||||||||||
| USB Hub Compatible |
Untested | ||||||||||||
| Power |
5 VDC, ? A | ||||||||||||
| Connector type |
USB Female Micro-B | ||||||||||||
|
Flags: battery, portable | |||||||||||||
| Other | |||||||||||||
|
| |||||||||||||
| 3rd Party Firmware Support | |||||||||||||
| Retail | |||||||||||||
| ASIN |
B01CTNN07K  | ||||||||||||
| Country of manuf | China | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 | |||||||||||||
| Wireless interface OUI |
none specified | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| MIMO status |
2x2:2 | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
| 802.11n |
up to 300 Mbps | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
Kimax U25AWF
There is three brend name of this device Kimax/Mixxar/Blueendless
- There is not official site of it.
Kimax U25AWF is a HDD Enclosure with Wi-Fi/Eth conection and battery.
- It has 1x USB 2.0 and 1x USB 3.0 OTG/Charge.
Modes
It has three modes
- 1. HDD Enclosure with USB 2.0 HUB
- 2. NAS
- 2a. Power supply from battery
- 2b. Power supply from USB 3.0 port
- 3. Power bank
Links of Interest
Vendor links
- Kimax U25AWF on AliExpress (currently selling for ~$45)
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt Forum
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 18.06.0
Current supported version: 23.05.5
Please insert instructions here
OEM Firmware
It is OpenWRT with changed WebUI (system version 1.1.6).
- There is not Telnet/SHH.
There is patch supporting all option of this device.
- Checked for Chaos Calmer. All work
Upgrading
Upgrading Firmware
It can be done with OEM WebUI.
Upgrading Bootloader
You can upgrade bootloader from u-boot menu or using programmer.
JTAG-Serial Info
Serial
Board don`t have pins for serial connection. But you can solder three wires
- (2 micro pad tx, rx and gnd get at any place where you want).
Serial port settings is 57600 8n1 for u-boot and 9600 8n1
- (was found out by "logic analyzer") for firmware
- (settings are changed from start of uploading firmware)
