BroMax WA304-UF

b (B11)
11Mbps Wireless Access Point with 4-port 10/100M LAN Switch
WikiDevi.wi-cat.ru	BroMax WA304-UF
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	BroMax WA304-UF
FCC ID	O6M-WA304-UF
Type	access point
CPU1	Ubicom IP2022
CPU1 Type	Ubicom 32
CPU1 Speed	not specified
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Ubicom IP2022
Switch	Marvell Model?
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	PCMCIA (16-bit)
PCMCIA slots	1
Power	? VDC, ? A
Connector type	barrel
Retail
FCC approval date	18 April 2002
Radio 1
Radio1 module	BroMax WM300-IF
Radio1 module IF	PCMCIA (16-bit)
Chip1	Intersil ISL3871IN33
Chip2	Intersil ISL3684
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.

For a list of all currently documented BroMax device with specifications, see BroMax.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

This FCC ID defines two devices...

• WA304-UF
  • 4-port Switch for LAN
• WA301-UF
  • Single LAN port

"WA304-UF REV:XB" is silkscreened on the main board in the FCC photos.

"WM300-IF REV: XA" is silkscreened on the wireless module in the FCC photos.

The ISL3871 used on the wireless module is an ISL3871IN33.

The FCC manual specifies the default SSID pattern as GROUPXXXXXX and default IP as 192.168.1.100.