We'll be deploying 1.43 to ShoutWiki sites this weekend. Staff will be working all weekend to deal with any unforeseen bugs that crop up.

CreateWiki will not be available immediately after the upgrade; however, we expect the rewrite to be completed during this release cycle.

Broadcom BCM94371ZAE

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1200)
802.11a/b/g/n/ac WLAN
+ Bluetooth PCI-E/SDIO NGFF 2230 Card
WikiDevi.wi-cat.ru Broadcom BCM94371ZAE
Platform
BrandModelRev Broadcom BCM94371ZAE
Interface SDIO
Connector M.2
Form factor 2230

ID:14e4:440d

FCCID QDS-BRCM1090
ICID 4324A-BRCM1090
Chip1 Broadcom BCM4371E

OUI: none specified

Antenna Connection MHF4
MIMO status 2x2:2
Wireless Standards IEEE 802.11a/b/g/n/ac
802.11ac up to 867 Mbps
802.11n up to 300/300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
802.11a up to 54 Mbps
Operating Frequency 2.4 or 5 GHz
Other
Manuf/OEM/ODM Foxconn U98H130 .01

Flags:
Bluetooth

UART has accessible UART

Probable Linux driver
brcmfmac
(see also passys)

Retail
Availability reference design
FCC approval date 29 January 2016
Country of manuf China

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Broadcom devices with specifications, see Broadcom.

867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class

Overview

From the FCC documents...

  • 802.11a/b/g/n/ac, HT20/HT40/VHT20/VHT40/VHT80, WLAN (2TX, 2RX)
  • Bluetooth 4.0 BR/EDR/LE, (1TX,1RX), Chain1 (FCC SAR Test Report)
  • Multiple modules are covered by this FCC ID.
    • BCM94371Z (EUT1) - M.2 (E Key) PCIe/USB interface
    • BCM94371Z (EUT2) - M.2 (E Key) PCIe/USB/SDIO/UART
    • BCM94371ZAE (EUT3) - M.2 (A/E Key) PCIe/USB

Noted use of this reference design

  • Foxconn U98H130.00 (CoO: China), BCM94371ZAEH1
    • HP P/N: 843224-001, SPS#/#SA: 8435490-001, HW: 13, FW: 01
    • OUIs: A8:A7:95, 30:F7:72 (Eng. Sample)
  • Foxconn U98H130.01 (CoO: China), BCM94371ZAEH3
    • HP P/N: 849915-001, SPS#/#SA: 849915-001, HW: 14, FW: 01
    • OUIs: 44:1C:A8 (label)

Notes

Software support

Linux support

BCM4317x is supported by brcmfmac. [1].

brcm80211: include Broadcom BCM4371 firmware on the debian-kernel mailing list

+ brcm/brcmfmac4371-pcie.bin
 longdesc: wireless network cards supported 
 by the brcmsmac or brcmfmac driver
+ use_fw bcm4371-bt-uart (brcm/BCM4371C2)
+ use_fw bcm4371-sdio
iw phy
iw phy
Wiphy phy0
	max # scan SSIDs: 10
	max scan IEs length: 2048 bytes
	max # sched scan SSIDs: 16
	max # match sets: 16
	max # scan plans: 1
	max scan plan interval: 508
	max scan plan iterations: 0
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 0 (up to 0m)
	Device supports roaming.
	Available Antennas: TX 0 RX 0
	Supported interface modes:
		 * IBSS
		 * managed
		 * AP
		 * P2P-client
		 * P2P-GO
		 * P2P-device
	Band 1:
		Capabilities: 0x1022
			HT20/HT40
			Static SM Power Save
			RX HT20 SGI
			No RX STBC
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 16 usec (0x07)
		HT TX/RX MCS rate indexes supported: 0-15
		Frequencies:
			* 2412 MHz [1] (20.0 dBm)
			* 2417 MHz [2] (20.0 dBm)
			* 2422 MHz [3] (20.0 dBm)
			* 2427 MHz [4] (20.0 dBm)
			* 2432 MHz [5] (20.0 dBm)
			* 2437 MHz [6] (20.0 dBm)
			* 2442 MHz [7] (20.0 dBm)
			* 2447 MHz [8] (20.0 dBm)
			* 2452 MHz [9] (20.0 dBm)
			* 2457 MHz [10] (20.0 dBm)
			* 2462 MHz [11] (20.0 dBm)
			* 2467 MHz [12] (20.0 dBm) (no IR)
			* 2472 MHz [13] (20.0 dBm) (no IR)
			* 2484 MHz [14] (disabled)
	Band 2:
		Capabilities: 0x1062
			HT20/HT40
			Static SM Power Save
			RX HT20 SGI
			RX HT40 SGI
			No RX STBC
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 16 usec (0x07)
		HT TX/RX MCS rate indexes supported: 0-15
		VHT Capabilities (0x0c015820):
			Max MPDU length: 3895
			Supported Channel Width: neither 160 nor 80+80
			short GI (80 MHz)
			SU Beamformer
			SU Beamformee
		VHT RX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT RX highest supported: 0 Mbps
		VHT TX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT TX highest supported: 0 Mbps
		Frequencies:
			* 5170 MHz [34] (disabled)
			* 5180 MHz [36] (20.0 dBm) (no IR)
			* 5190 MHz [38] (disabled)
			* 5200 MHz [40] (20.0 dBm) (no IR)
			* 5210 MHz [42] (disabled)
			* 5220 MHz [44] (20.0 dBm) (no IR)
			* 5230 MHz [46] (disabled)
			* 5240 MHz [48] (20.0 dBm) (no IR)
			* 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
			* 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
			* 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
			* 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
			* 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
			* 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
			* 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
			* 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
			* 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
			* 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
			* 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
			* 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
			* 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
			* 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
			* 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
			* 5720 MHz [144] (20.0 dBm) (no IR, radar detection)
			* 5745 MHz [149] (20.0 dBm) (no IR)
			* 5765 MHz [153] (20.0 dBm) (no IR)
			* 5785 MHz [157] (20.0 dBm) (no IR)
			* 5805 MHz [161] (20.0 dBm) (no IR)
			* 5825 MHz [165] (20.0 dBm) (no IR)
	valid interface combinations:
		 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
		   total <= 3, #channels <= 2
		 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
		   total <= 4, #channels <= 1

Windows support

Possibly useful link @ DriverAgent, which appears to link to some .cab files available from Windows Update