Buffalo BHR-4RV
From TechInfoDepot
Jump to navigationJump to search
| router | |
| Wikipedia | Buffalo Inc. |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Status Unknown |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Buffalo BHR-4RV |
| Type | router |
CPU1  | Broadcom BCM4704 |
| CPU1 Type | BMIPS3300 |
| CPU1 Speed | 333 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Brand? Model? |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
| |
| Expansion IF types | none specified |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Buffalo devices with specifications, see Buffalo.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
Target: brcm47xx
Subtarget: legacy
Package architecture: mipsel_mips32
Support started version: unknown
Current supported version: EOL
Last Supported Version: unknown
Subtarget: legacy
Package architecture: mipsel_mips32
Support started version: unknown
Current supported version: EOL
Last Supported Version: unknown
WLAN Hardware: unknown
Comment:
pages have been deleted on OpenWrt
Comment:
pages have been deleted on OpenWrt
Please insert instructions here
