Buffalo CloudStor CS-WX rev 1D
From TechInfoDepot
Jump to navigationJump to search
| Buffalo CloudStor CS-WX | |
|
| |
| Downloads | Download page |
|---|---|
| Wikipedia | Buffalo Inc. |
| WikiDevi.wi-cat.ru | Buffalo CloudStor CS-WX/1D |
| 3rd Party Firmware | |
| dd-wrt | Incompatible |
| OpenWrt | Incompatible |
| Tomato any flavor | Incompatible |
| Gargoyle | Incompatible |
| Platform | |
| Brand • Model • Rev | Buffalo CloudStorCS-WX rev 1D |
| Type | NAS enclosure |
| CPU1 | Marvell 88F6281 |
| CPU1 Type | ARMv5 |
| CPU1 Speed | 600 MHz |
| Flash1 Chip | STMicro M25P40VP |
| Flash1 Size | 512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> |
| RAM1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip | SK hynix H5PS5162FFR-S5C x 2 |
| ETH chip1 | Marvell 88F6281 |
| ETH chip2 | Marvell 88E1118 |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
| Stock bootloader | U-Boot 1.1.4 |
| Stock FW OS | Linux 2.6.31.8 |
| Expansion IF types | USB 2.0, SATA II |
| USB ports | 1 |
| SATA Ports | 2 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 4 A |
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN) |
| Serial Port (UART) | yes, 4-pin header, unpopulated, 3.3V TTL, (115200 8N1), |
|
Flags: | |
|
Additional chips | |
| Other | |
|
| |
| 3rd Party Firmware Support |
Debian |
| Retail | |
| (Est.) release date | October 2011 |
| (Est.) initial retail price (in USD): | $130 |
| Newegg | N82E16822165290 |
| ASIN |
B004RFGK1W |
| Country of manuf | China |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Buffalo devices with specifications, see Buffalo.
Overview
This unit appears to be identical to LS-WXL series but uses different software.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Debian can be installed following instruction here: https://github.com/rogers0/OpenLinkstation/issues/19