Buffalo WBMR-300HPD
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |
|---|---|
| AirStation WBMR-300HPD | |
 | |
| Homepage | |
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Buffalo WBMR-300HPD |
| FCC ID |
none specified |
| Type |
dsl modem, wireless router |
| CPU1 |
Lantiq (Intel) PSB 80910 |
| CPU1 Type |
MIPS 34Kc |
| CPU1 Speed |
500 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Lantiq (Intel) PSB 80910 |
| Switch |
Lantiq (Intel) PSB 80910 |
| Ethernet Port Count |
2-100MbE-WAN 3-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| Serial Port (UART) |
yes, (115200 8N1) |
|
Flags: ADSL2+ Annex A | |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
Brand? Model? |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: lantiq
OpenWrt Subtarget: xrx200
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: 23.05.5
OpenWrt Target: lantiq
OpenWrt Subtarget: xrx200
OpenWrt Package architecture: mips_24kc
Support started version: 17.01.0
Current supported version: 23.05.5
Please insert instructions here
Categories:
- Buffalo
- Embedded system/dsl modem
- Embedded system/wireless router
- Embedded System Lantiq (Intel)
- Embedded System PSB 80910
- Lantiq (Intel)
- Embedded System MIPS 34Kc
- Embedded System
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
