Buffalo WHR-600D
abgn (AN600) | |
---|---|
N600 Dual Band Wireless Router | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Buffalo WHR-600D |
FCC ID | |
IC ID | |
Type |
wireless router |
CPU1 | |
CPU1 Type |
MIPS 24KEc |
CPU1 Speed |
580 MHz 32-bit |
Flash1 Chip |
Winbond Model? |
Flash1 Size |
? MiB |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
SK hynix H5PS5162GFR-S6C |
ETH chip1 | |
Switch | |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
12 VDC, 1 A |
Connector type |
barrel |
Other | |
Default SSID: Buffalo-A-XXXX (6 addl. devices) | |
Manuf/OEM/ODM |
Gemtek WRTR-296N |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
FCC approval date | 26 April 2013 |
UPC |
747464127088 (UPC DB, On eBay) |
ASIN | B00DZJU6B6 |
Country of manuf | China |
Radio 1 | |
Chip1 | |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
Ralink RT5592 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
Overview
"WRTR-296N_V01" and "ESK-A07-4601R RoHS" is silkscreened on the board in the FCC photos.
25Q32BVSIG (W25Q32BVSIG) 8MB Flash?
Default credentials are per the FCC manual. The default SSID patterns are based upon the FCC label. They may be inaccurate..
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: 23.05.5
Comment:
Wlan 5.0GHz not work
Please insert instructions here
- Buffalo
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7620A
- MediaTek
- Embedded System MIPS 24KEc
- Embedded System
- Manuf Gemtek
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System Ralink
- Embedded System RT5592
- Ralink
- Embedded System IEEE 802.11a/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation