Buffalo WHR-AMG54
From TechInfoDepot
Jump to navigationJump to searchabg (AG108) | |
---|---|
Wireless-AG Router and Access Point | |
Homepage |
Product page (JP) |
Wikipedia | |
InfoDepot Wiki | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt |
Incompatible |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Buffalo WHR-AMG54 |
FCC ID |
none specified |
Type |
wireless router |
CPU1 |
Broadcom BCM5351G |
CPU1 Type |
BMIPS3300 |
CPU1 Speed |
200 MHz |
Flash1 Chip |
Macronix Model? |
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip |
EtronTech EM638165TS-7 x 2 |
ETH chip1 |
Broadcom BCM5351G |
Switch |
Broadcom BCM5351G |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
802dot11 OUI: none specified | |
Expansion IF types |
none specified |
Power |
? VDC, ? A |
Serial Port (UART) |
yes, internal, 4-pin header, populated, 3.3V TTL |
Other | |
| |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
Availability | Japan only |
(Est.) release date | August 2005 |
Radio 1 | |
Chip1 |
Broadcom BCM4318 |
Chip2 |
Broadcom BCM2060 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
RP-SMA |
Wireless Standard |
IEEE 802.11a/b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
2.4 or 5 GHz |
Radio cor_rev |
9 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
Overview
On wifi.com.cn (internal images)
- "WHR4-AG54A REV: XC" and a date code of 0542 is silkscreened on the board.
- The format would seem to indicate CyberTAN manuf
Links of Interest
Buffalo WHR-G54S、WHR-HP-G54、WHR-AMG54、WHR-AM54G54 Firm On the DD-WRT Forum
Per the DD-WRT Supported Devices table, you can use the WHR-HP-G54 firmware.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v24 sp2
use firmware for WHR-HP-G54
Please insert instructions here
Pictures
Categories:
- Buffalo
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5351G
- Broadcom
- Embedded System BMIPS3300
- Embedded System
- Manuf CyberTAN
- DD-WRT Supported
- Embedded System BCM4318
- Embedded System BCM2060
- Embedded System IEEE 802.11a/b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation